OneBlueSky Posted July 26, 2012 Share Posted July 26, 2012 Hello! I've been racking my brain trying to get my 560Ti card working in Mountain Lion. Some people seem to have it working OOB, but no such luck here. I've tried all the boot flags applicable to video issues, no luck. Can't seem to find any kexts for it either! So I can't get native resolution, or any kind of acceleration. If I load anything with any kind of graphic movement (the scrolling bar in Safari for example) it immediately crashes the system (with no error). It just freezes the screen until I force a restart by holding the power button. Can anyone help me figure out how to possibly edit the working kexts for Lion, to work in Mountain Lion? Or maybe show me what I need to do to come to a solution that might work? Thank you! Link to comment Share on other sites More sharing options...
OneBlueSky Posted July 27, 2012 Author Share Posted July 27, 2012 Just an update.. Another thing I have tried, is putting all the kexts related to NVIDIA stuff from Lion, into S/L/E of Mountain Lion. Doesn't seem to do anything at all. Didn't really expect it to, just an update on something else I tried in case anyone has any ideas Link to comment Share on other sites More sharing options...
mxm619 Posted July 28, 2012 Share Posted July 28, 2012 if you figure it out please report back! Link to comment Share on other sites More sharing options...
fantomas Posted July 28, 2012 Share Posted July 28, 2012 HCL_10.8_Seeds#NVIDIA Link to comment Share on other sites More sharing options...
mxm619 Posted July 28, 2012 Share Posted July 28, 2012 HCL_10.8_Seeds#NVIDIA i've tried " GraphicsEnabler=Yes" and it doesnt work. just boots into a black screen after the loading gray screen... Link to comment Share on other sites More sharing options...
Jiggyda Posted July 28, 2012 Share Posted July 28, 2012 Try removing the following Options from your org.chameleon.Boot.plist They was causing this problem here: boot option: EnableC2State=Yes boot option: EnableC3State=Yes boot option: EnableC4State=Yes This is how my bootloader config looks like: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Legacy Logo</key> <string>No</string> <key>EthernetBuiltIn</key> <string>Yes</string> <key>GenerateCStates</key> <string>Yes</string> <key>GeneratePStates</key> <string>Yes</string> <key>Graphics Mode</key> <string>1680x1050x32</string> <key>GraphicsEnabler</key> <string>Yes</string> <key>Kernel</key> <string>mach_kernel</string> <key>Kernel Flags</key> <string>npci=0x2000</string> <key>Timeout</key> <string>5</string> <key>USBBusFix</key> <string>Yes</string> <key>EnableHDMIAudio</key> <string>Yes</string> <key>KeyLayout</key> <string>mac-de</string> <key>UHCIreset</key> <string>mac-de</string> <key>ForceHPET</key> <string>Yes</string> </dict> </plist> Link to comment Share on other sites More sharing options...
OneBlueSky Posted July 28, 2012 Author Share Posted July 28, 2012 Try removing the following Options from your org.chameleon.Boot.plist They was causing this problem here: boot option: EnableC2State=Yes boot option: EnableC3State=Yes boot option: EnableC4State=Yes This is how my bootloader config looks like: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Legacy Logo</key> <string>No</string> <key>EthernetBuiltIn</key> <string>Yes</string> <key>GenerateCStates</key> <string>Yes</string> <key>GeneratePStates</key> <string>Yes</string> <key>Graphics Mode</key> <string>1680x1050x32</string> <key>GraphicsEnabler</key> <string>Yes</string> <key>Kernel</key> <string>mach_kernel</string> <key>Kernel Flags</key> <string>npci=0x2000</string> <key>Timeout</key> <string>5</string> <key>USBBusFix</key> <string>Yes</string> <key>EnableHDMIAudio</key> <string>Yes</string> <key>KeyLayout</key> <string>mac-de</string> <key>UHCIreset</key> <string>mac-de</string> <key>ForceHPET</key> <string>Yes</string> </dict> </plist> Going to try this and report back shortly! Fingers crossed! Edit: Hmm... The lines - " boot option: EnableC2State=Yes boot option: EnableC3State=Yes boot option: EnableC4State=Yes " don't exist for me to delete. Sadly, didn't work for me! However my card now shows as what it is, an NVIDIA GTX 560Ti with 2048mb, until this point it was showing as nothing and just "3mb"... Closer I guess, but hopefully can get the rest of the way! Link to comment Share on other sites More sharing options...
OneBlueSky Posted July 29, 2012 Author Share Posted July 29, 2012 Fixed!! I used the kexts for DP3 from http://www.insanelymac.com/forum/index.php?showtopic=280837&view=findpost&p=1837150 installed them using kext wizard, rebooted, and my problem is gone! Apparently the NVIDIA support has been messed up from DP4 on. So reverting back to DP3 kexts works great. I have full graphics support, acceleration is working, everything is perfect. Hopefully it works for you guys having the same issue as well! Link to comment Share on other sites More sharing options...
mxm619 Posted July 29, 2012 Share Posted July 29, 2012 Fixed!! I used the kexts for DP3 from http://www.insanelym...dpost&p=1837150 installed them using kext wizard, rebooted, and my problem is gone! Apparently the NVIDIA support has been messed up from DP4 on. So reverting back to DP3 kexts works great. I have full graphics support, acceleration is working, everything is perfect. Hopefully it works for you guys having the same issue as well! how did you get past the black kernal panic after the gray screen? thats the only issue i'm having. i cannot get to the installer screen.. Link to comment Share on other sites More sharing options...
Peter_sm Posted July 29, 2012 Share Posted July 29, 2012 for me is NV*.kext from DP2 that's working for me., on DP2 is one kext less than the other version of DPx & retail of ML. //Peter Link to comment Share on other sites More sharing options...
OneBlueSky Posted July 29, 2012 Author Share Posted July 29, 2012 how did you get past the black kernal panic after the gray screen? thats the only issue i'm having. i cannot get to the installer screen.. I wasn't having that issue I'm afraid All my troubles began after installing. What method of install are you using? Maybe we can get it figured out Link to comment Share on other sites More sharing options...
mxm619 Posted July 30, 2012 Share Posted July 30, 2012 I wasn't having that issue I'm afraid All my troubles began after installing. What method of install are you using? Maybe we can get it figured out [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url].. since i installed lion very easy with it.. what method did you use? Link to comment Share on other sites More sharing options...
OneBlueSky Posted August 2, 2012 Author Share Posted August 2, 2012 Sorry for such a delayed response! For some reason I never got notification you replied! This is the method I used ultimately http://www.insanelymac.com/forum/index.php?showtopic=280756 Doing it that way I had no trouble getting through install, my problems only began after! Link to comment Share on other sites More sharing options...
DislikeYou Posted August 2, 2012 Share Posted August 2, 2012 I have GTX 560Ti 448. Works well. I had to use: <key>PciRoot</key> <string>0</string> in org.chameleon.Boot.plist Link to comment Share on other sites More sharing options...
meltd0wn Posted August 30, 2012 Share Posted August 30, 2012 using the DP3 kexts are you able to use dual monitors? My build at the moment is lacking dual monitor support. Im running a Z77 ud5h i7 3770k and gtx 5610ti with kexts from ######. I used PCIRootUID=0 and everything else standard. Link to comment Share on other sites More sharing options...
NoKz Posted August 30, 2012 Share Posted August 30, 2012 using the DP3 kexts are you able to use dual monitors? My build at the moment is lacking dual monitor support. Im running a Z77 ud5h i7 3770k and gtx 5610ti with kexts from ######. I used PCIRootUID=0 and everything else standard. When I get home I'll check what Kexts I'm using. With my 560Ti's, dual monitors work beautifully. Link to comment Share on other sites More sharing options...
meltd0wn Posted August 30, 2012 Share Posted August 30, 2012 NoKz are you using a single 560? i have tried a few things and been researching for over a week now and i cant seem to find anything. Link to comment Share on other sites More sharing options...
Recommended Posts