Jump to content

How to fix Starting Darwin x86 error on UD5H motherboard


dkash
 Share

3 posts in this topic

Recommended Posts

How to fix Starting Darwin x86 error. I have tried everything i could think of with: -v, -x, -f, -s, cpus=1, busratio=34, PCIRootUID=1

 

Here are my specs:

Mobo: Gigabyte GA-Z77X-UD5H Socket 1155 Intel Z77 Chipset Dual Channel DDR3 1600/1333/1066 MHz 3x PCI-Express x16 GigaLAN 7.1-CH HD Audio 5x SATA 6Gb/s 2.4 x SATA 3Gb/s 6x USB 2.0 10x USB

3.0 VGA/DVI/HDMI/DisplayPort ATX

CPU: Intel Core i7-3770 Quad- Core Socket 1155, 3.4Ghz, 8MB L3 Cache, 22nm (Retail Boxed) Gen3 (BX80637I73770)

Case: NZXT Phantom WHITE w/RED Enthusiast Full Tower Case (NZXTPHAN003RD)

SSD: OCZ (VTX4-25SAT3-128G) Vertex 4 2.5" 128GB SATA3 6GB/s Solid State Drive, Read: 560MB/s, Write: 430MB/s

RAM: 64.99 G.SKILL Ripjaws X Series DDR3 1866MHz (PC3-14900) 8GB (2x4GB) Dual Channel Kit (F3-14900CL9D-8GBXL)

PSU: Corsair Enthusiast Series TX850 V2 850W 80PLUS Bronze Certified Power Supply (CMPSU-850TXV2)

CPU Cooler: Corsair (CWCH80) Hydro Series H80 High-performance CPU Cooler -- for Intel 2011/1366/1156/1155/775 & AMD AM3/AM2+/AM2

Temporary GPU: Sapphire 6450 1gb

 

Used iatkos l1/l2, iatkos s3, iatkos v7. Tried in virtualbox and same error.

I cannot find ANYTHING on ANYONE being able to succesfully get this fix working.

WHY is this not working? WHAT are the causes? WHAT BIOS settings?

 

Please Help.

Link to comment
Share on other sites

Step one: Don't use any installers that start with an "i" or end in "Atkos",

Step two: start here, http://www.insanelymac.com/forum/index.php?showtopic=280420&hl=ivy&st=0 guide is for ML which has newer kernel to support Ivy-Bridge, if installing Lion your gonna want to start with 10.7.4 and use the kernel from the 2012 MacBookPro update instead, rest of the guide should be the same

Link to comment
Share on other sites

Step one: Don't use any installers that start with an "i" or end in "Atkos",

Step two: start here, http://www.insanelym...420&hl=ivy&st=0 guide is for ML which has newer kernel to support Ivy-Bridge, if installing Lion your gonna want to start with 10.7.4 and use the kernel from the 2012 MacBookPro update instead, rest of the guide should be the same

 

I would gladly do any of the legit methods if i had a Mac to do it on. Isn't there any method for ONLY PC?

Link to comment
Share on other sites

 Share

×
×
  • Create New...