mediamac Posted July 12, 2012 Share Posted July 12, 2012 Hi, I have successfully installed Mountain Lion GM and all working except the graphic display is 1400 and rendering very slow.The resolution 1920 is not working.Which kext i have to install in order to work 6850HD and also what is QE/CL and how to install it ? please help me. Thanks in advance ! Link to comment Share on other sites More sharing options...
rockinron_1 Posted July 12, 2012 Share Posted July 12, 2012 Out of curiosity have you fixed disk permissions then rebuild the kernel cache (try booting with -f) since install? Â Failing that what brand is your hd6850? Â EDIT: Easy way: download kext utility, navigate to /system/library/extensions. Drag and drop ATI6000Controller.kext onto kext utility. Reboot and see what happens. Link to comment Share on other sites More sharing options...
mediamac Posted July 12, 2012 Author Share Posted July 12, 2012 Out of curiosity have you fixed disk permissions then rebuild the kernel cache (try booting with -f) since install? Â Failing that what brand is your hd6850? Â EDIT: Easy way: download kext utility, navigate to /system/library/extensions. Drag and drop ATI6000Controller.kext onto kext utility. Reboot and see what happens. UPDATE : i have booted with -v -f for first boot and also tried kext utility to install the ATI6000Controller.kext extension but it gives white screen.If i remove ATI6000Controller.kext it works but low resolution with laggy graphics. BTW i have sapphire HD6850 2GB. Thanks Link to comment Share on other sites More sharing options...
rockinron_1 Posted July 12, 2012 Share Posted July 12, 2012 Try to reinstall the kext then repair disk permissions. I'm on a sapphire hd6870, just done ML today, had the exact same problem. The method described above fixed the issue, have you definitely repaired disk permissions? Â Its a known issue with the 6xxx controller and incorrect permissions in the installer. You should be able to remove the kext then reinstall it, fix permissions and be back to normal - have a play about, your issue is definitely in that area. Link to comment Share on other sites More sharing options...
mediamac Posted July 12, 2012 Author Share Posted July 12, 2012 Try to reinstall the kext then repair disk permissions. I'm on a sapphire hd6870, just done ML today, had the exact same problem. The method described above fixed the issue, have you definitely repaired disk permissions? Â Its a known issue with the 6xxx controller and incorrect permissions in the installer. You should be able to remove the kext then reinstall it, fix permissions and be back to normal - have a play about, your issue is definitely in that area. I have installed ati6000 using kext utility and repaired permissions using disk utility.Then booted with -v -f and it stucked on the ntfs volume name .... or white screen on graphic mode. Â Which ati6000controller.kext are you using.The one comes with mountain lion GM or any other ? let me know. Link to comment Share on other sites More sharing options...
rockinron_1 Posted July 12, 2012 Share Posted July 12, 2012 The one which comes with ML. Â After research around the internet the recommended fix appears to be to remove the ati6000controller from your install media and make a backup of it. Then install mountain lion (obviously without graphics acceleration). Then after install to install the kext you backed up, fix permissions, rebuild disk cache and reboot. Thats pretty much what I did and it worked. Link to comment Share on other sites More sharing options...
mediamac Posted July 13, 2012 Author Share Posted July 13, 2012 Hi, I am using the display port is that causing the problem ? but lion seems to be working fine with ati6000controller.kext Thanks Link to comment Share on other sites More sharing options...
Skreel Posted July 13, 2012 Share Posted July 13, 2012 After the Installation the fix permissions tip is what worked well here (with an ASUS EAH6850 DirectCU 1GB) Â The Installation was possible by either: *removing the ATI6000Controler, from the install. AND inserting the ATIRadeon3000.kext from the DP3 *applying the personality patch to the ATI6000Controller.kext so that display port and all other work for both *-options booting with GraphicsEnabler=No was required Link to comment Share on other sites More sharing options...
haxzion Posted July 13, 2012 Share Posted July 13, 2012 You need to make some custom personalities in order to get past the white screen,get all connectors to work and get hdmi sound. Another thing that matters is which model are you using in smbios.I myshelf was getting AGPMcontroller error while i was using imac12,2 so i had to edit the info plist in AGPM.kext too  http://www.insanelymac.com/forum/index.php?showtopic=273937&hl=&fromsearch=1 Link to comment Share on other sites More sharing options...
mediamac Posted July 13, 2012 Author Share Posted July 13, 2012 You need to make some custom personalities in order to get past the white screen,get all connectors to work and get hdmi sound. Another thing that matters is which model are you using in smbios.I myshelf was getting AGPMcontroller error while i was using imac12,2 so i had to edit the info plist in AGPM.kext too  http://www.insanelym...l=&fromsearch=1  Oh thats a long tutorial i will check it out. Thanks Link to comment Share on other sites More sharing options...
Skreel Posted July 13, 2012 Share Posted July 13, 2012 yeah, the tutorial looks messy but actually its an easy procedure. had the same thoughts and waited until I absolutely needed it :-) The most important part is the perl script (ati-personality.pl) that gives your the offsets of your GraphicsCard-Personality in the Atix000Controller.kext. Just run it and find the personality offset (You'll need the xcode command-line tools for the script to work.) And than all you have to do is change the bytes with a hex-editor. Maybe you can find the right bytes for your card already posted somewhere. Link to comment Share on other sites More sharing options...
mediamac Posted July 13, 2012 Author Share Posted July 13, 2012 yeah, the tutorial looks messy but actually its an easy procedure. had the same thoughts and waited until I absolutely needed it :-) The most important part is the perl script (ati-personality.pl) that gives your the offsets of your GraphicsCard-Personality in the Atix000Controller.kext. Just run it and find the personality offset (You'll need the xcode command-line tools for the script to work.) And than all you have to do is change the bytes with a hex-editor. Maybe you can find the right bytes for your card already posted somewhere. Ok shall i use this tutorial or will i wait for the right kext to release by somebody.I am still a newbie only Link to comment Share on other sites More sharing options...
charliebounce Posted July 13, 2012 Share Posted July 13, 2012 Try using the DVI port first. When everything is working then try switching to the DP port. I use a Sapphire HD 6850 & I have never had a problem in Lion & M_Lion. I use the 2 DVI port for my two U2412m monitors! Link to comment Share on other sites More sharing options...
mediamac Posted July 13, 2012 Author Share Posted July 13, 2012 This is a real headache to hackintosh users every time they update or release new os.Now i have only display port available Link to comment Share on other sites More sharing options...
mediamac Posted July 14, 2012 Author Share Posted July 14, 2012 In lion the 6850 works absolutely fine and no problem so far.But i dont find amdaccelerator and even i put ati6000 from lion it stucked at ntfs volume name any ideas? I dont want to give up help me. Link to comment Share on other sites More sharing options...
Skreel Posted July 14, 2012 Share Posted July 14, 2012 boot in verbose mode (-v), check what personality chameleon selected for your ATIConfig post it here, maybe somebody will update that personality in the ML ATI6000 for you with that from LION (if its different) Link to comment Share on other sites More sharing options...
mediamac Posted July 14, 2012 Author Share Posted July 14, 2012 boot in verbose mode (-v), check what personality chameleon selected for your ATIConfig post it here, maybe somebody will update that personality in the ML ATI6000 for you with that from LION (if its different) I am using the Duckseed personality with atiport 5 but still stuck with "Ntfs version name ... " I boot it verbose mode.Shall i try different personality like Gibba.? waiting for your answers Link to comment Share on other sites More sharing options...
Skreel Posted July 14, 2012 Share Posted July 14, 2012 yes, try ATIConfig=Bulrushes too, its for 5 Ports I think. Maybe a newer Chameleon recognizes your Card better, (like Ermac mine) Link to comment Share on other sites More sharing options...
mediamac Posted July 14, 2012 Author Share Posted July 14, 2012 yes, try ATIConfig=Bulrushes too, its for 5 Ports I think. Maybe a newer Chameleon recognizes your Card better, (like Ermac mine) ask rockinron what bootloader He uses. Can i use the same Ati6000 kext on that tutorial as i has the same 6850 but different manufacturer.Will there be any difference ? i will update the chameleon as you said. Thanks Link to comment Share on other sites More sharing options...
Skreel Posted July 14, 2012 Share Posted July 14, 2012 Anything that brings you towards an understanding of the issue, and develop an Intuition what can/should be done and how it works. OSX has a clear and beautiful inner Design like the Desktop Candy. Thats the hackintoshing fun ..well, at least for me, but looking at this forum and similiar, I think I'm not alone :-) 1 Link to comment Share on other sites More sharing options...
rockinron_1 Posted July 14, 2012 Share Posted July 14, 2012 Using a sapphire HD6870 1GB once I've installed (i.e. remove ati6000controller then installed then re-added it) it will boot with chameleon and and graphicsenabler=no happily. Editing my org.chameleon.boot.plist to graphicsenabler=yes personality=duckweed and use atirom has no difference - the card works perfect with either. I've tested HDMI and DVIx2 but not DP Link to comment Share on other sites More sharing options...
mediamac Posted July 14, 2012 Author Share Posted July 14, 2012 Using a sapphire HD6870 1GB once I've installed (i.e. remove ati6000controller then installed then re-added it) it will boot with chameleon and and graphicsenabler=no happily. Editing my org.chameleon.boot.plist to graphicsenabler=yes personality=duckweed and use atirom has no difference - the card works perfect with either. I've tested HDMI and DVIx2 but not DP I dont think much difference between 6870 and 6850.I have done enough replacement so i will reinstall the ML GM again. Link to comment Share on other sites More sharing options...
rockinron_1 Posted July 14, 2012 Share Posted July 14, 2012 INtrestingly for anyone thats bothered I could also install using a hd5770 fine, then boot in to os x and fix permissions and swap the hd5770 for 6870 Link to comment Share on other sites More sharing options...
mediamac Posted July 15, 2012 Author Share Posted July 15, 2012 Anything that brings you towards an understanding of the issue, and develop an Intuition what can/should be done and how it works. OSX has a clear and beautiful inner Design like the Desktop Candy. Thats the hackintoshing fun ..well, at least for me, but looking at this forum and similiar, I think I'm not alone :-) Hi Skreel, I followed your guidelines and put personalities and many like duckweed,bulrush and more but no luck.I can boot in -v -f with GE=no all i have is low resolution with choppy graphics.The card is not even recognized i think. All this on a display port.Let me know what you think . Link to comment Share on other sites More sharing options...
Skreel Posted July 16, 2012 Share Posted July 16, 2012 check your mail about the personality mods in the ML controler hope it helps Link to comment Share on other sites More sharing options...
Recommended Posts