dakku Posted April 28, 2012 Share Posted April 28, 2012 Hi Guys, I have the above board and want to get a working DSDT. Can anyone help me patch it? dsdt_original.dsl.zip Link to comment Share on other sites More sharing options...
dakku Posted April 30, 2012 Author Share Posted April 30, 2012 if anyone is interested in following my progress on github: https://github.com/dakkusingh/Zotac-9300KE-OSX86 I have a working DSDT based solution and got the following working: Graphic -- VGA -- DVI -- HDMI (video) Onboard sound -- Headphone jack -- Mic (untested) -- SPDIF (untested) Sleep/Wake/Restart Still need some help with USB2 support in bios and HDMI audio. Anyone care to collaborate? Link to comment Share on other sites More sharing options...
C.Frio Posted April 30, 2012 Share Posted April 30, 2012 Ola a despeito dos colegas serem meio avessos, se for so a falta do DSDT,eu tenho 3 plataformas..biostar e 2 foxconn, funcionando com o DSDT gerado pelo "DSDT patcher GUI " que apesar de ser antigo, me atendeu perfeitamente.. sorry...my mistake,it's english ..not portuguese.. so... I used "DSDT patcher GUI" on 3 rigs..biostar and two foxconn with good results (just basic DSDT) c.frio Link to comment Share on other sites More sharing options...
Hugo_bee Posted April 30, 2012 Share Posted April 30, 2012 already done .. bios mod with dsdt OOTB ciao http://www.insanelymac.com/forum/index.php?showtopic=163938&st=0 Link to comment Share on other sites More sharing options...
dakku Posted April 30, 2012 Author Share Posted April 30, 2012 already done .. bios mod with dsdt OOTB ciao http://www.insanelym...pic=163938&st=0 hey mate.. thanks for ur reply.. I have been reading through 37 page thread over the past couple of weeks and am still confused. Is there a working DSDT for KE without having to do the BIOS flash? Also, did you guys fix the HDMI audio issues? Link to comment Share on other sites More sharing options...
Hugo_bee Posted April 30, 2012 Share Posted April 30, 2012 hdmi don't know.. but th edsdt in the 1st is still ok.. except for the nvda,parent mod to obtain a good dsdt for lion Link to comment Share on other sites More sharing options...
dakku Posted April 30, 2012 Author Share Posted April 30, 2012 except for the nvda,parent mod to obtain a good dsdt for lion I have the graphics card working without any problems in Lion. maybe you can take a look at the github link? Link to comment Share on other sites More sharing options...
Hugo_bee Posted May 1, 2012 Share Posted May 1, 2012 could you send me your latest dsdt? I use a compare.. andi know it in my mind..I see where is needed to see.. maybe I can tell you smh ps I don't use github.. actually I'm not mac osx due to hardwork on w7 platform.. with some programs that are not usable in mac but.. apart of it.. what is your exact problem? only the hdmi? Link to comment Share on other sites More sharing options...
dakku Posted May 1, 2012 Author Share Posted May 1, 2012 could you send me your latest dsdt? hi friend. you can see latest stable version of my DSDT here, download it to do a diff https://github.com/dakkusingh/Zotac-9300KE-OSX86/blob/master/Extra/DSDT.dsl what is your exact problem? only the hdmi? currently I have 3 main issues.. - hdmi audio doesnt work - usb2 mode in bios causes crash - no QE/CI Any help? Link to comment Share on other sites More sharing options...
Hugo_bee Posted May 1, 2012 Share Posted May 1, 2012 usb mode in all zotac mobo must be put in full mode not high! qe/ci ? catch my invidia dsdt section.. and see what I done. also in the other 3D i've opened in Asus motherboard (mcp79a) I had qe/ci I don't remember the steps.. it was too much time before! but it's the 1st thing I've achieved .. believe me.. because of MCP79a is MAC OSX ootb (is in a lot of macbook) it's so hard to think not to have qe/ci you must see if you are as stricht as possible to Vanilla kexts.. in the zotac there's no need to mod a lot of kext to run mac. otherwise.. what's the sense to buy that mobo!! 1 Link to comment Share on other sites More sharing options...
dakku Posted May 1, 2012 Author Share Posted May 1, 2012 usb mode in all zotac mobo must be put in full mode not high! Is there no way to enable this in mobo? i use a usb hdd to boot and its SLOW without usb2 support in mobo. qe/ci ? catch my invidia dsdt section.. and see what I done. Thanks I will run a diff against ur DSDT. I also noticed a lot of stuff around the CPU section in your DSDT, is that all required? catch my invidia dsdt section.. and see what I done. can you please send me ur latest DSDT? Link to comment Share on other sites More sharing options...
Hugo_bee Posted May 1, 2012 Share Posted May 1, 2012 no. absolutely it's not a mod on the bios.. the bios mod is not hardware.. eh! all the mcp79a has that limit.. but in the full mode (not high) you will see that you'll run 480mbt/s.. as if you/re high I'll extract my dsdt from the bios.. I never run dsdt in a zotac.. and this solve all the problem of run an original mac dvd!! I/ve changed also the model number/manufacture name!! here you are.. bye and good luck Link to comment Share on other sites More sharing options...
kimaca Posted August 30, 2012 Share Posted August 30, 2012 I have Test this DSDT on Lion with no Success (Kernelpanic on ACPI). I have no modded Bios , is this reason. Lion Run's (10.7.4) on my Zotac itx without DSDT but no Sleep! Can You Help ? Link to comment Share on other sites More sharing options...
Recommended Posts