Jump to content
11 posts in this topic

Recommended Posts

Hello,

 

I've installed Iatkos L2 and got almost everything working except for sound, video and the wireless card. This are the settings from my laptop:

 

- Cpu: i3 370m

- Graphic card: Intel ??? each time i research i get a different result but this are the specs:

 

Intel (0x8086)

Device ID: 0x0046

Revision ID: 0x0002

- Sound codec : Audio Conexant CX20671 (tried latest voodoo and no candy :( )

- Wireless card: i dont have a clue :\ I remember using BCM43XX or Atheros something in ubuntu but i cannot recall.

 

I hope you guys can help me out.

 

thanks

00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02)
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05)
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05)
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05)
00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 05)
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 05)
00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5)
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
05:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02)
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02)
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02)
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02)
ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02)
ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02)

Can you run lspci -nn in Ubuntu? If I have the device ID I can give you a wireless enabler.

 

With Voodoo, you probably can get it to work for your sound if you patch the kext. When I have more time I'll post instructions. :)

 

With graphics, the only way those Intel graphics can work is if you have 1) Intel GMA 900, 2) Intel GMA 950, 3) Intel GMA X3100, 4) Intel HD Graphics, 5) Intel HD Graphics 3000. Find out what you have (or what cards you could have) and I'll let you know if it'll work. :)

  • Like 1

Can you run lspci -nn in Ubuntu? If I have the device ID I can give you a wireless enabler.

 

With Voodoo, you probably can get it to work for your sound if you patch the kext. When I have more time I'll post instructions. :)

 

With graphics, the only way those Intel graphics can work is if you have 1) Intel GMA 900, 2) Intel GMA 950, 3) Intel GMA X3100, 4) Intel HD Graphics, 5) Intel HD Graphics 3000. Find out what you have (or what cards you could have) and I'll let you know if it'll work. :)

 

Hey, i just posted the lspci -nn above.

 

For the graphic card it seems to be a intel HD Graphics, i tried this:

 

http://www.insanelymac.com/forum/index.php?showtopic=261912

 

I copied the .kexts to desktop used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and reboot but i still get No Kext Load. When i first installed i had to "rm -rf AppleIntelHD*.*" to be able to boot.

 

Also there's a lot of DSDT editing that i see people mentioning but i dont have an idea what is it about.

 

Thanks

After some research i dont think its possible to install wireless card (BCM4313), but i still think its possible to get my video card and sound working properly.

 

All i need is to change my resolution from 1024x768 to 1366x768 but i cant do that, tried to edit com.apple.Boot.plist but it didnt worked

You are using Snow Leopard, right?

 

Here are two kexts for WiFi. First, take BroadcomWiFiInjector.kext and place it in /Extra/Extensions, then run Kext Utility to update caches. If that doesn't work, delete BroadcomWiFiInjector.kext and drag IO80211Family.kext onto Kext Utility, which will install the kext into /System/Library/Extensions.

 

For your video, have you tried typing GraphicsEnabler=Yes at the boot prompt? Your graphics chip's ID is supported in Apple's kext, so it should work. If it doesn't, we can try a simple DSDT fix. :)

I already messed up with kexts, i had to remove all AppleIntelHD*.* kexts to boot into x. GraphicsEnabler works but i cant change resolution or do anything...

 

I will try to install the wifi kexts now

You have to have Apple's stock drivers in order to get graphics support. If you're not up for reinstalling, let me know what version of OS X you're installing and I'll get you the proper drivers.

Tried to install wifi with those two methods but i didnt suceed :( Any other suggestion?

 

I am running :

 

System Version: Mac OS X 10.7.2 (11C74)

Kernel Version: Darwin 11.2.0

 

If you can help me out with kexts i will be glad.

 

Thank you

Nothing other than you may want to consider a retail install (they are a heck of a lot easier to work with). I'll look up some methods for WiFi enabling.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...