MystKid Posted January 15, 2012 Share Posted January 15, 2012 hello guys i jsut installed osx leopard and then updated to lion. a friend of mine told me that i need to apply some pathes in order to not have the cpu running at 100% all the time. anyone can help me out? i am on an asus p8z68 motherboard Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/ Share on other sites More sharing options...
Foxic Posted January 15, 2012 Share Posted January 15, 2012 You will need to remove any disabler/nullcpupowermanagement kext in order for AppleCPUPowerManagement to load. This may require a DSDT edit. You will also need to use a boot loader such as chameleon 2.1 which will automatically generate c and p states for your processor. Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1786632 Share on other sites More sharing options...
MystKid Posted January 16, 2012 Author Share Posted January 16, 2012 can you help me in doing this please i dont know where to start from. i have read a bunch of guides but i am missing in how to do the dsdt edit Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1786663 Share on other sites More sharing options...
Foxic Posted January 16, 2012 Share Posted January 16, 2012 1. Backup what you have to external hard drive using carbon copy cloner 2. Install chameleon 2.1 3. Install DSDT Editor and extract your DSDT 4. delete NullCPUPowerManagement.kext and disabler.kext 5. reboot with -v EnableCStates=Yes EnablePStates=Yes (add any flags you need in order to boot) 6. If the OS loads, great, AppleCPUPowerManagement is loading natively, you should now have c and p states enabled. You can check this with z-cpu/similar. If the OS doesn't load you will need to edit your DSDT to allow AppleCPUPowerManagement to load. This differs for every motherboard so your best option is to post a thread in the DSDT section asking for help. Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1786768 Share on other sites More sharing options...
MystKid Posted January 16, 2012 Author Share Posted January 16, 2012 sorry i don't understand what to do can you explain better pls Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1786903 Share on other sites More sharing options...
Gringo Vermelho Posted January 16, 2012 Share Posted January 16, 2012 One thing at a time 1) Install Chameleon 2.1 I have files and a manual install guide up over at Voodoo Projects. If you're not up for it use one of the installer packages that are available here on InsanelyMac. Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1786920 Share on other sites More sharing options...
MystKid Posted January 16, 2012 Author Share Posted January 16, 2012 i have chimera v1.7.0 r1294 installed now do i have to switch to chamelon 2.1? i did a cloen of the install on an external HD. now what do i do? Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1786924 Share on other sites More sharing options...
Gringo Vermelho Posted January 17, 2012 Share Posted January 17, 2012 I told you in post #6 right up above. use google or the forum search to find the things I mentioned. I don't know if it's necessary to change boot loader. The only thing I know about Chimera is that it's another version of Chameleon. I don't know what it does differently. You should try to find out before you do anything. Don't worry about the DSDT yet, you do not necessarily have to do anything to your DSDT to have native powermanagement working. The DSDT edit is done to get AppleLPC.kext to load, but there are other ways as well. Read here for more information: http://www.projectosx.com/forum/index.php?s=&showtopic=102&view=findpost&p=2532 Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1786950 Share on other sites More sharing options...
MystKid Posted January 17, 2012 Author Share Posted January 17, 2012 i have read that site you told me at this point i am confused more then i was before XD Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1786958 Share on other sites More sharing options...
Gringo Vermelho Posted January 17, 2012 Share Posted January 17, 2012 Like many others before you, you're going to have to be more specific and put into words exactly what you need help with. Nobody here knows you, nobody can read your mind. "I am confused" with no reference, doesn't mean anything. Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1786962 Share on other sites More sharing options...
MystKid Posted January 17, 2012 Author Share Posted January 17, 2012 after i extracted my dsdt what do i need it for? Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1787066 Share on other sites More sharing options...
Foxic Posted January 17, 2012 Share Posted January 17, 2012 You need it incase it requires patching. Follow the steps I detailed in post #4. Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1787070 Share on other sites More sharing options...
MystKid Posted January 17, 2012 Author Share Posted January 17, 2012 once i did everything how do i know if it is workign right? Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1787210 Share on other sites More sharing options...
Gringo Vermelho Posted January 17, 2012 Share Posted January 17, 2012 You can find that and much more in this topic: http://www.insanelymac.com/forum/index.php?showtopic=225766 Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1787221 Share on other sites More sharing options...
MystKid Posted January 17, 2012 Author Share Posted January 17, 2012 i have to use cpu-z and see what the multiplier says? Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1787223 Share on other sites More sharing options...
Gringo Vermelho Posted January 17, 2012 Share Posted January 17, 2012 CPU-z will not work with vanilla power management. Keep an eye on your CPU temps, install Apple developer tools to get IORegistryExplorer and use that to find out if native power management is working. Refer to the topic I linked to to find out how. Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1787235 Share on other sites More sharing options...
MystKid Posted January 17, 2012 Author Share Posted January 17, 2012 i tryed some apps from the appstore for temps but they dont display anything Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1787238 Share on other sites More sharing options...
Gringo Vermelho Posted January 17, 2012 Share Posted January 17, 2012 Install the correct fakesmc plugins for your hardware. http://www.projectosx.com/forum/index.php?showforum=165 Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1787253 Share on other sites More sharing options...
MystKid Posted January 17, 2012 Author Share Posted January 17, 2012 i have an asus p8z68 deluxe mobo noone has that in that forum Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1787264 Share on other sites More sharing options...
Gringo Vermelho Posted January 18, 2012 Share Posted January 18, 2012 It doesn't matter what motherboard you have, what matters is which sensor ICs it uses. For example, my board has a Winbond sensor so I use the Winbond plugin. Bresink's Temperature Monitor (google it) should give you at least CPU and hard drive temp readouts without installing anything else. Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1787286 Share on other sites More sharing options...
MystKid Posted January 18, 2012 Author Share Posted January 18, 2012 my temps are at 23C how do i check now if the patch worked? Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1787491 Share on other sites More sharing options...
Gringo Vermelho Posted January 18, 2012 Share Posted January 18, 2012 See post #16 and stop trying to get other people to do the work for you. You have been pointed to various sources of reliable information already. Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1787495 Share on other sites More sharing options...
MystKid Posted January 18, 2012 Author Share Posted January 18, 2012 ok i am at the io registry app.. i found AppleIntelCPUPowerMAnagement.. what tells me if its working? Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1787508 Share on other sites More sharing options...
Gringo Vermelho Posted January 19, 2012 Share Posted January 19, 2012 That information is available in the topic I've already linked to in this thread. If you had spent some time reading that topic, you would have found it. In fact there is a huge hint in a post on the very first page of that topic. This is the last time I will hold your hand, good luck. Find PerformanceStateArray under ACPI_smc. Those are your P-states. Most people have four or eight. C-states should be working if you see CSTInfo (Snow Leopard and Leopard) or AICPMVers (Lion) in there. Link to comment https://www.insanelymac.com/forum/topic/274688-post-installation-cpu-at-full-speed/#findComment-1787564 Share on other sites More sharing options...
Recommended Posts