nWm_CZ Posted September 9, 2011 Share Posted September 9, 2011 I was inspired by this guide, but it needed little change. All files for installation is there. What do you need: 8GB usb stick, working Mac OS X ( I used emulated Mac OS X Lion in VMWare on Windows 7) 1. Insert USB stick, run Disk Utility, select USB stick - tab Partition, add 1 partition, select Mac OS Extended (Journaled) and the most important thing!!! in Options select MBR table !!! And apply changes. 2. Follow guide from MaLd0n (restore BaseSystem, copy Packages folder, install Extra_Lion and Chameleon RC5) and you are ready for install. 3. In BIOS set AHCI for disk drives and set booting from USB stick. 4. After installation run [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] from http://tonymacx86.com/ and install EeasyBeast, System Utilities, ALC8xxHDA, AppleHDA Rollback (from Drivers and Bootloaders - Kexts and Enablers - Audio - Realtek ALC8xx), ALC888 (from Drivers and Bootloaders - Kexts and Enablers - Audio - Realtek ALC8xx - Non-DSDT HDAEnabler), Realtek Gigabit Ethernet 2.0.6 (from Drivers and Bootloaders - Kexts and Enablers - Network) 5. Restart and audio and network should work I had problem with signing in to App store, I fixed it with PCIRootUID set to 1 in com.apple.Boot.plist <key>PCIRootUID</key> <string>1</string> My graphic card is ATI Sapphire HD4850 512MB, got it working with QE/CI by ATY_init.kext from netkas.org and I also used 10.7.1 exotic patch from netkas.org EDIT: I have installed Lion as my primary system and installation 10.7.1 update before [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] doesn't work for me. I had to install [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], 10.7.1 combo update and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] again for Audio Problems: I have 5.1 sound system and only 2.1 works PS: I have C2D E8300 1,86 @ 2,33Ghz and it's recognized fine and sorry for my english Link to comment https://www.insanelymac.com/forum/topic/267628-guide-lion-on-abit-ip35-pro/ Share on other sites More sharing options...
spoiled11 Posted September 12, 2011 Share Posted September 12, 2011 Hi nWm_CZ, Thanks for this guide. I will try to install Lion on my PC: My hardware is: Abit IP35 Pro Intel Core 2 Q9550 ATI Diamond 5770 Did Lion install on your PC as 64-bit? I know, you posted in OSx86 Installation, but was just wondering Thanks. Link to comment https://www.insanelymac.com/forum/topic/267628-guide-lion-on-abit-ip35-pro/#findComment-1747522 Share on other sites More sharing options...
nWm_CZ Posted September 13, 2011 Author Share Posted September 13, 2011 I am kind a new in Mac world, so I'm glad, it's working and I don't care about 32bit/64bit But after entering uname -a into terminal, it says 32 bit mode :/ Darwin nwms-Mac-Pro.local 11.1.0 Darwin Kernel Version 11.1.0: Tue Jul 26 16:09:02 PDT 2011; root:xnu-1699.22.81~1/RELEASE_I386 i386 Link to comment https://www.insanelymac.com/forum/topic/267628-guide-lion-on-abit-ip35-pro/#findComment-1748039 Share on other sites More sharing options...
spoiled11 Posted September 15, 2011 Share Posted September 15, 2011 I added this in my boot.plist: <key>Kernel Flags</key> <string>arch=x86_64</string> and Lion booted in 64-bit. Use Text Wrangler to edit boot.plist file. Now, if this messes your system then I'm not responsible , but I hope it works for you. Link to comment https://www.insanelymac.com/forum/topic/267628-guide-lion-on-abit-ip35-pro/#findComment-1748789 Share on other sites More sharing options...
nWm_CZ Posted September 16, 2011 Author Share Posted September 16, 2011 I will try after 10.7.2 comes out But thank you Link to comment https://www.insanelymac.com/forum/topic/267628-guide-lion-on-abit-ip35-pro/#findComment-1749025 Share on other sites More sharing options...
vividvew Posted October 20, 2011 Share Posted October 20, 2011 I was not able to get audio to work using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] driver. No output or input devices seen in System Preferences->Audio. I can't for the life of me remember where I got these kext but they were part of a pack of a bunch different possible kext for ALC88 that I used to try and get audio working in SL. These were the only ones from that pack that worked for me. Using only these two kext and no DSDT.aml(no idea if this matters) I have full 7.1 working on IP35 Pro in 10.7.2 but be warned I only use the two digital out ports and have never even tried the three colored ones or mic input. Hope these work for folks out there!! ALC888_IP35_pro.zip Link to comment https://www.insanelymac.com/forum/topic/267628-guide-lion-on-abit-ip35-pro/#findComment-1762457 Share on other sites More sharing options...
nWm_CZ Posted December 5, 2011 Author Share Posted December 5, 2011 I have to run [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] twice to get audio working. Btw I have tried installation by tonymacx86 and it`s also working great Link to comment https://www.insanelymac.com/forum/topic/267628-guide-lion-on-abit-ip35-pro/#findComment-1775952 Share on other sites More sharing options...
Kasakka Posted January 24, 2012 Share Posted January 24, 2012 Do you have working sleep? Link to comment https://www.insanelymac.com/forum/topic/267628-guide-lion-on-abit-ip35-pro/#findComment-1788965 Share on other sites More sharing options...
Recommended Posts