gkwloki Posted August 15, 2011 Share Posted August 15, 2011 Hello folks, I have successfully installed SL 10.6.3 on my Dell Latitude E4300 with the Disto of iAtkos v2. After installing, I wanted to update to 10.6.8 by the Apple integrated software update. After rebooting the installation keeps hanging on the start screen with the apple logo. Therefore I started the installation in verbose mode and single user (-v -x) and there is the problem. I see many HFS+ lines and when it becomes interesting at the end it shows some lines and then reboots immediately and I am not able to view the output. I have tried to pause the prozess with the pause key on my keyboard but it ends so fast, that I am not able to pause at the right lines. The last line I have managed to pause at was: RTC: Only single RAM bank (128 bytes) I have googled this line and found out, that this is nothing to worry about. (Is that right?) I hope that I find the helping lines after the RTC:.... line but therefore I have to prevent the laptop from rebooting when the last line in verbose mode is reached. How can I do that?Do you need any more specs about my hardware for that? I couldn't find anything regarding this in the www. Probably I could not put it in appropriate search key words. Thanks in advance!! Link to comment https://www.insanelymac.com/forum/topic/265624-1068-reboot-in-verbose-mode/ Share on other sites More sharing options...
aufa333 Posted August 16, 2011 Share Posted August 16, 2011 try to boot with the same DVD u used for the 1st installation ,also the problem about Distro versions that they have lots of modifications which when u update to the original update from mac ,lots of this mods gets wiped-out/alterd so after u boot try to install the same drivers from ur distro again and check on google 1st for any updated drivers/kext for 10.6.8 or u may get the same error/kp again. Link to comment https://www.insanelymac.com/forum/topic/265624-1068-reboot-in-verbose-mode/#findComment-1735394 Share on other sites More sharing options...
gkwloki Posted August 16, 2011 Author Share Posted August 16, 2011 So would you suggest to install LION with a Retail DVD and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]? Link to comment https://www.insanelymac.com/forum/topic/265624-1068-reboot-in-verbose-mode/#findComment-1735469 Share on other sites More sharing options...
maly70 Posted August 16, 2011 Share Posted August 16, 2011 Lion does not go with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] but xMove and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] i think For 10.68 drivers use [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] it will solve all your problem Good Luck Link to comment https://www.insanelymac.com/forum/topic/265624-1068-reboot-in-verbose-mode/#findComment-1735666 Share on other sites More sharing options...
gkwloki Posted August 17, 2011 Author Share Posted August 17, 2011 Hello, I now setup a boot USB stick with Lion 10.7 on it after this guide: http://www.insanelymac.com/forum/index.php?showtopic=263357 When I boot from USB stick the bootloader boots and when I choose the USB Drive to start from, I get the following output: and the installation does not start. When I boot from the stick again, choose the stick in bootloader again and boot with -v -x I get the following output: Can somebody help me? I could install 10.6.3 from the iAtkos S3 v2 without a problem. But with the stick now, I dont even come to an installation screen. Here are my hardware specs: hardware_e4300.txt Thank you guys very much. PS: Maybe an admin can move this thread to 10.7 now? Link to comment https://www.insanelymac.com/forum/topic/265624-1068-reboot-in-verbose-mode/#findComment-1736327 Share on other sites More sharing options...
gkwloki Posted August 18, 2011 Author Share Posted August 18, 2011 Cant somebody help me? I am not able to start the installation from the USB. It always keeps hanging at the grey bootscreen before the installation should start. Link to comment https://www.insanelymac.com/forum/topic/265624-1068-reboot-in-verbose-mode/#findComment-1736834 Share on other sites More sharing options...
aufa333 Posted August 19, 2011 Share Posted August 19, 2011 Cant somebody help me? I am not able to start the installation from the USB. It always keeps hanging at the grey bootscreen before the installation should start. can post a SS of ur Extra folder from the USB ? Link to comment https://www.insanelymac.com/forum/topic/265624-1068-reboot-in-verbose-mode/#findComment-1737127 Share on other sites More sharing options...
gkwloki Posted August 19, 2011 Author Share Posted August 19, 2011 can post a SS of ur Extra folder from the USB ? I will do that as soon as I am Home. Link to comment https://www.insanelymac.com/forum/topic/265624-1068-reboot-in-verbose-mode/#findComment-1737131 Share on other sites More sharing options...
gkwloki Posted August 19, 2011 Author Share Posted August 19, 2011 Here is my extra/extensions folder on my USB stick: bild.tiff unfortunately I cannot edit or view pictures. But I will not put any work in that because I want to update to Lion. Hopefully it is fixed there. This are the files that are in my extra/extensions folder: AppleACPIPS2Nub.kext Disabler.kext EvOreboot.kext fakesmc.kext VoodooBattery.kext VoodooPS2Controller.kext VoodooTSCSync.kext Link to comment https://www.insanelymac.com/forum/topic/265624-1068-reboot-in-verbose-mode/#findComment-1737224 Share on other sites More sharing options...
gkwloki Posted August 19, 2011 Author Share Posted August 19, 2011 Ok...I now downloaded another SL 10.6.0 retail DVD image, burned it to DVD-DL and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] could see this DVD after I inserted it (with my other burned DVDs [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] did not show it in the bootscreen after pressing F5 for several times)...But here comes the next issue. The Install DVD starts but hangs in the grey Apple screen. Here is the output of -v -x: What does this mean? Thank you very much. Link to comment https://www.insanelymac.com/forum/topic/265624-1068-reboot-in-verbose-mode/#findComment-1737282 Share on other sites More sharing options...
Recommended Posts