Jump to content
36 posts in this topic

Recommended Posts

Ok ill post to you new IOREG plus 2 photos!

 

I'have saw differences: Like ---> pci.bridge@7

 

i had removed RP04 as its related to ide .. u using sata only right ?

 

ok i see my mistake i have to add Device (ARPT) with the _ADR 0x00060000 or something close

i need lspci -n

 

try this dsdt again u have ar922x thats match to 2a atheros.

but since i have 2a when i compile it it says unicode(*) ( i have that id already there.. u dont u have 29..so u need to make dsdt2a.dsl into dsdt.aml in dsdtse or dsdt editor.)

i included both original and my mod with id 2a in 0x000060000 i might be off a digit so if dont work we can adjust.

 

in terminal lspci -n ?

I have some problems :\ from mac i cannot see the second sata hard drive (With windows) and now IO80211 Original finds airport (but the system goes into KP when i'm booting) only method for change the dsdt is boot with -x

 

EDIT: i'm going to change dsdt 2aboth

Ps: yes i have 2 pci slot tried all, up and down left and right.. This card has NO SENSE

I have some problems :\ from mac i cannot see the second sata hard drive (With windows) and now IO80211 Original finds airport (but the system goes into KP when i'm booting) only method for change the dsdt is boot with -x

 

EDIT: i'm going to change dsdt 2aboth

Ps: yes i have 2 pci slot tried all, up and down left and right.. This card has NO SENSE

try 2aboth.zip has 2 dsdt.dsl one says ORIGdsdt2a.dsl compile with dsdtse.. all i did to that one is the (ARPT)

the card might be the issue. .PCI on a pci-e chipset. .hmm wrong BUS.= driver from apple made for pci-e

 

heres the imac9,1 dsdt so u can compare differences.. very mixed on 1/2 of it

 

idont see UID in the imac91 Device (PCI)

 

if system is stable without the pci card.

try pci-e adapter with a supported card

http://cgi.ebay.com/Mini-PCI-E-PCI-E-Wirel...i-/280699533231

with AR5B91 or BCM94321MC

Io prenderei un IO80211Family. kext vergine della versione che usi e metterei l'id della scheda nel info.plist e poi installi il kext (cancellando prima quello che hai tu) se cosìn va in KP allora è una incopatibilità fisica della scheda. Anche a me è capitato con una TP-link: con 2 PC KP con gli altri liscia come l'olio

@Latin I've tried your dsdt modded but as you can see from IOREG the device has name: ARPT@6 but with this my pc don't detect any airport:( In system Profile is the same thing (only grafic card).. I'm givin up :\

 

@Giorgio Ieri avevo gia provato questa soluzione, stesso KP, quindi secondo te è meglio gettare la spugna? :) Eventualmente sai dirmi qualche scheda che sia compatibile 100% con la P5N?

ARPT.zip

@Latin I've tried your dsdt modded but as you can see from IOREG the device has name: ARPT@6 but with this my pc don't detect any airport:( In system Profile is the same thing (only grafic card).. I'm givin up :\

 

@Giorgio Ieri avevo gia provato questa soluzione, stesso KP, quindi secondo te è meglio gettare la spugna? :) Eventualmente sai dirmi qualche scheda che sia compatibile 100% con la P5N?

ioname shows pci168c,29 i give up also.

 

get supported card. this one is not 100% match to 2a so i guess is a Kp cause

http://www.projectosx.com/forum/index.php?...post&p=4258

								"name",
							Buffer ()
							{
								"pci168c,2a"
							},

  • 2 weeks later...
×
×
  • Create New...