cimpox Posted July 12, 2011 Share Posted July 12, 2011 Hi everyone. I have this mother board and the following specs: Processors ------------------------------------------------------------------------- Number of processors 1 Number of threads 1 APICs ------------------------------------------------------------------------- Processor 0 -- Core 0 -- Thread 0 0 Processors Information ------------------------------------------------------------------------- Processor 1 ID = 0 Number of cores 1 (max 2) Number of threads 1 (max 2) Name Intel Core 2 Duo E7600 Codename Wolfdale Specification Intel® Core2 Duo CPU E7600 @ 3.06GHz Package (platform ID) Socket 775 LGA (0x0) CPUID 6.7.A Extended CPUID 6.17 Core Stepping R0 Technology 45 nm TDP Limit 65 Watts Core Speed 1570.3 MHz Multiplier x FSB 6.0 x 261.7 MHz Rated Bus speed 1046.9 MHz Stock frequency 3066 MHz Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T, VT-x L1 Data cache 32 KBytes, 8-way set associative, 64-byte line size L1 Instruction cache 32 KBytes, 8-way set associative, 64-byte line size L2 cache 3072 KBytes, 12-way set associative, 64-byte line size FID/VID Control yes FID range 6.0x - 11.5x Max VID 1.275 V Chipset ------------------------------------------------------------------------- Northbridge Intel G41 rev. A3 Southbridge Intel 82801GB (ICH7/R) rev. A1 Graphic Interface PCI-Express PCI-E Link Width x16 PCI-E Max Link Width x16 Memory Type DDR3 Memory Size 4096 MBytes Channels Single Memory Frequency 523.4 MHz (1:2) CAS# latency (CL) 7.0 RAS# to CAS# delay (tRCD) 7 RAS# Precharge (tRP) 7 Cycle Time (tRAS) 20 Row Refresh Cycle Time (tRFC) 86 Command Rate (CR) 2T MCHBAR I/O Base address 0x0FED14000 MCHBAR I/O Size 4096 Memory SPD ------------------------------------------------------------------------- DIMM # 1 SMBus address 0x50 Memory type DDR3 Module format UDIMM Manufacturer (ID) Kingston (7F98000000000000) Size 4096 MBytes Max bandwidth PC3-10700 (667 MHz) Part number 9905458-026.A00LF Serial number 881CAF8B Manufacturing date Week 24/Year 11 Number of banks 8 Nominal Voltage 1.50 Volts EPP no XMP no Monitoring ------------------------------------------------------------------------- Mainboard Model G41M-P26 (MS-7592) (0x000003F3 - 0x92733920) Graphics ------------------------------------------------------------------------- Number of adapters 1 Graphic APIs ------------------------------------------------------------------------- API NVIDIA I/O Display Adapters ------------------------------------------------------------------------- Display adapter 0 Name NVIDIA GeForce 8400 GS (Microsoft Corporation - WDDM v1.1) Revision A2 Codename G98 Technology 65 nm Memory size 128 MB PCI device bus 1 (0x1), device 0 (0x0), function 0 (0x0) Vendor ID 0x10DE (0x1458) Model ID 0x06E4 (0x34ED) Performance Level 0 I want to install os x on this pc.. can you help me with a guide? or with information if will work on my pc? Thank you. Link to comment https://www.insanelymac.com/forum/topic/262190-msi-g41m-p26/ Share on other sites More sharing options...
cimpox Posted July 20, 2011 Author Share Posted July 20, 2011 Hello... I have some news... I installed snow leopard retail using I boot and a retail dvd. With I boot dvd my system works but without I boot it doesn't. I tried to install a bootloader but no succes. I attached a picture with my error. Any ideas or help needed!!! Thanks! Link to comment https://www.insanelymac.com/forum/topic/262190-msi-g41m-p26/#findComment-1717984 Share on other sites More sharing options...
jnxjn Posted October 14, 2011 Share Posted October 14, 2011 Hello... I have some news...I installed snow leopard retail using I boot and a retail dvd. With I boot dvd my system works but without I boot it doesn't. I tried to install a bootloader but no succes. I attached a picture with my error. Any ideas or help needed!!! Thanks! I also have the same issue with the same hardware configuration. Works with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. But does not boot to the HDD even after I ran [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. Stuck at FakeSMCDevice : successfully initialized. Any help is deeply appreciated Thanks in advance Link to comment https://www.insanelymac.com/forum/topic/262190-msi-g41m-p26/#findComment-1759707 Share on other sites More sharing options...
PookyMacMan Posted October 15, 2011 Share Posted October 15, 2011 Try the OSx86 ModCD. It might work better. I wrote a guide here. Link to comment https://www.insanelymac.com/forum/topic/262190-msi-g41m-p26/#findComment-1760222 Share on other sites More sharing options...
Recommended Posts