hackintosh's in xfx 790i SLI ultra 3 Way

[ld^]

im trying to install hackintosh on my HW about one month, but poorly.

spec:

DualCore Intel Core 2 Duo E6420, 2133 MHz (8 x 267) - x86, x86-64, MMX, SSE, SSE2, SSE3, SSSE3, 775 Contact LGA

XFX 790i Ultra SLI 3 Way

NVIDIA GeForce GTS 250

1x 2GB RAM DDR3

HDD and DVD-RW are sata

 

So, im tried to install: Snow Leopard 6.1 - 6.2 intel/amd by hazard, Snow Leopard 10.6.6i by hazard, iAtkos S3 V2, iAtkos S3 10.6.3, iAtkos v7 10.5.7, iDeneb v1.4 10.5.6 and iPC OSx86 universal PPE6 Final 10.5.6 v1.1.

 

im booting up in verbose mode to install hackintosh with this flags:

-nforce -v, -nforce_core -v / ahead of the "nforce" is dash its because i cant boot up withnout this dash

-arch=i386 -v

 

my hard drive is connected to the red sata connector close to the CPU and dvd-rw is connected to one of the first 2 native sata ports on the mainboard. its because when my dvd-rw is connected to red sata connector close to the cpu then i cant boot up SL 6.1 - 6.2 i/a.. it shows me boot system config file'/com.apple.boot.plist not found.

in iAtkos i can boot up with dvd-rw connected in red sata connector, but it doesnt matter anyway.

 

everything in booting then formating hdd works fine. im formating hdd in MBR because i have separate HDD's for dual boot, but i dot know what to check in customization.

im tried many many possibilities with checking kexts and patch and blah blah in customization, but always after installation is finish i get install Failed! in every systems..

 

so i be in agreement that is problem in bios? also i tried many many posiblities in adjusting bios.

 

im really really fussed through this problem.

PLS. anybody who can help me to solve this *censured*.. will be very very perfect.. i will be grateful. thx

[verdant]

im trying to install hackintosh on my HW about one month, but poorly.

spec:

DualCore Intel Core 2 Duo E6420, 2133 MHz (8 x 267) - x86, x86-64, MMX, SSE, SSE2, SSE3, SSSE3, 775 Contact LGA

XFX 790i Ultra SLI 3 Way

NVIDIA GeForce GTS 250

1x 2GB RAM DDR3

HDD and DVD-RW are sata

 

So, im tried to install: Snow Leopard 6.1 - 6.2 intel/amd by hazard, Snow Leopard 10.6.6i by hazard, iAtkos S3 V2, iAtkos S3 10.6.3, iAtkos v7 10.5.7, iDeneb v1.4 10.5.6 and iPC OSx86 universal PPE6 Final 10.5.6 v1.1.

 

im booting up in verbose mode to install hackintosh with this flags:

-nforce -v, -nforce_core -v / ahead of the "nforce" is dash its because i cant boot up withnout this dash

-arch=i386 -v

 

my hard drive is connected to the red sata connector close to the CPU and dvd-rw is connected to one of the first 2 native sata ports on the mainboard. its because when my dvd-rw is connected to red sata connector close to the cpu then i cant boot up SL 6.1 - 6.2 i/a.. it shows me boot system config file'/com.apple.boot.plist not found.

in iAtkos i can boot up with dvd-rw connected in red sata connector, but it doesnt matter anyway.

 

everything in booting then formating hdd works fine. im formating hdd in MBR because i have separate HDD's for dual boot, but i dot know what to check in customization.

im tried many many possibilities with checking kexts and patch and blah blah in customization, but always after installation is finish i get install Failed! in every systems..

 

so i be in agreement that is problem in bios? also i tried many many posiblities in adjusting bios.

 

im really really fussed through this problem.

PLS. anybody who can help me to solve this *censured*.. will be very very perfect.. i will be grateful. thx

 

See my nForce chipset MOBO Snow Leopard Install Guide here......and my Series 7 nForce + Intel CPU MOBO Guide for Leopard (includes link to BIOS settings for OS X in post #1) here.....and my blog for Snow Leopard and Leopard install guides......

[dothacker]

I installed nawcom MOD + retail Snow Leopard on my nforce board 750i SLI. all i added is nforceata.kext, elliotforcelegacyrtc.kext, and some more kexts... but these two are the important ones to get your build running, at least.