Jump to content

Newbie help - cpupanic, won't boot


rayzor991
 Share

2 posts in this topic

Recommended Posts

Hello -

 

So I completed the install of 10.6.2, but I keep getting a CPU panic (see image).

 

If I choose -x for safe mode it boots fine (but I have no ethernet, or audio). There are no devices for ether in the System Preferences.

 

I was wondering if someone can help me with the following things:

 

1. find root cause/solution for the cpupanic (being able to boot without a panic and without going into safemode

2. Help install the correct kext for audio

3. Help installing the correct kext for network

4. Help installing correct/updated video drivers/kexts

4. Confirming that I have the correct video drivers installed.

 

here is my system information (taken from Ubuntu live):

 

Motherboard = P5LD2

http://usa.asus.com/product.aspx?P_ID=gD1ljCkUWy1Y3yMG

 

CPU INFORMATION

GenuineIntel, Intel® Pentium® 4 CPU 3.00GHz

Number of CPUs: 2

CPU clock currently at 3010.748 MHz with 2048 KB cache

Numbering: family(15) model(6) stepping(2)

Bogomips: 6021.49

Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pebs bts pni dtes64 monitor ds_cpl cid cx16 xtpr pdcm lahf_lm

 

MEMORY INFORMATION

Total memory: 1002 MB

Total swap: 2933 MB

 

STORAGE INFORMATION

SCSI device - scsi0

Vendor: ATA

Model: WDC WD800JD-22LS

SCSI device - scsi4

Vendor: SONY

Model: DVD-ROM DDU1615

 

HARDWARE INFORMATION

MOTHERBOARD

Host bridge

Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)

Subsystem: Intel Corporation Device 2580

PCI bridge(s)

Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02)

Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)

Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)

Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01)

Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02)

Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)

Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)

Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01)

USB controller(s)

Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)

Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)

Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)

Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)

Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20)

Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)

Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)

Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)

Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)

Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20)

ISA bridge

Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)

Subsystem: ASUSTeK Computer Inc. Device 8179

IDE interface

Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])

Subsystem: ASUSTeK Computer Inc. Device 8179

 

GRAPHIC CARD

VGA controller

nVidia Corporation NV41.1 [GeForce 6800] (rev a2)

Subsystem: nVidia Corporation Device 0245

 

SOUND CARD

Multimedia controller

Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)

Subsystem: ASUSTeK Computer Inc. Device 817f

 

NETWORK

Ethernet controller

Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 19)

Subsystem: ASUSTeK Computer Inc. Device 8142

 

NVIDIA GRAPHIC CARD INFORMATION

Model name: GeForce 6800

Card Type: PCI-E

Video RAM: unknown

GPU Frequency: unknown

Driver version: NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009

post-354391-1295021868_thumb.jpg

Link to comment
Share on other sites

  • 2 weeks later...

gpu is too old i'm told. support was dropped in 10.6. nevertheless i've seen people do it with much dsdt hacking, which i don't understand yet. mine compiles, but not after messing w/ gpu related stuff.

 

anyway, try nv_disable=1 boot flag. that'll boot everything else except nv kexts, so you still have audio / ethernet etc till you figure it out / swap graphics cards.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...