ditchmagnet Posted December 1, 2010 Share Posted December 1, 2010 I am trying to install on this board, and it is in the HCL: http://wiki.osx86project.org/wiki/index.ph...L_10.6.3#Asrock I am using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] to load the iATKOS install disk, I select the patches used, it goes through install, but then the computer never makes it to the OSX welcome video. Can anyone offer any pointers? Thanks. Link to comment Share on other sites More sharing options...
ditchmagnet Posted December 1, 2010 Author Share Posted December 1, 2010 I was able to install using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] + retail 10.6. I am only able to boot into safe mode though. If I try to boot in normal mode I get GSOD. I am going to run [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and hope that helps. How can I find out why it is giving GSOD? EDIT: booting with -v off of the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] CD results in the following: ACPI_SMC_PlatformPlugin: :start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out I have included a picture as well. So does anyone know what the problem is? I can still boot with -x and safe mode will work, but I would like to get this figured out. Thanks. Link to comment Share on other sites More sharing options...
ditchmagnet Posted December 2, 2010 Author Share Posted December 2, 2010 Well, I have been working on this all day, and have been able to get an almost fully functional system with 10.6.5. i5 760 4GB RAM 1TB hard drive GTX460 768MB QE/CI working Network -working Sound is not currently working. But seems like everything else is fine. Getting over 6k in geekbench right now, which I think should be about right. I just like that this dirt cheap 1156 motherboard ($62) is working so well so far. EDIT: I just installed a kext through [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] to see if it fixed restart (seems like shutdown is fine, but restart goes to a black screen and I have to manually restart) - but then I am getting GSOD. Safe boot works, so I am going to remove it and see if that works. EDIT: Removing the kext made it work again. So Shut down works fine, restart only partially works, and sleep does not work at all. Not a huge deal. Really I just want sound to work now and I'll call it a day. EDIT: Got sound working with VooDooHDA 0.2.61. Installed through [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. Very happy. Link to comment Share on other sites More sharing options...
CTX_2 Posted January 4, 2011 Share Posted January 4, 2011 I just like that this dirt cheap 1156 motherboard ($62) is working so well so far. EDIT: Got sound working with VooDooHDA 0.2.61. Installed through [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. Very happy. It seems this is a perfect mobo for SL. The audio function is the most important as I'm planning to build one for my friend. It's a cheap motherboard, with i3-540 or i3-550 & GTS 450 (spared the i5 for a better GPU, IMHO). I think of it as a nice value gaming build with a Mac SL in it. What do you think? Link to comment Share on other sites More sharing options...
hackpro51 Posted July 5, 2011 Share Posted July 5, 2011 Well, I have been working on this all day, and have been able to get an almost fully functional system with 10.6.5. i5 760 4GB RAM 1TB hard drive GTX460 768MB QE/CI working Network -working Sound is not currently working. But seems like everything else is fine. Getting over 6k in geekbench right now, which I think should be about right. I just like that this dirt cheap 1156 motherboard ($62) is working so well so far. EDIT: I just installed a kext through [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] to see if it fixed restart (seems like shutdown is fine, but restart goes to a black screen and I have to manually restart) - but then I am getting GSOD. Safe boot works, so I am going to remove it and see if that works. EDIT: Removing the kext made it work again. So Shut down works fine, restart only partially works, and sleep does not work at all. Not a huge deal. Really I just want sound to work now and I'll call it a day. EDIT: Got sound working with VooDooHDA 0.2.61. Installed through [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. Very happy. Just got snow leopard installed on asrock h55m-le using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] intel pentuim g6950 nVidia geforce gt 220 250 gb sata hdd 4gb 1333 ddr3 ram is very stable thanks Dj Link to comment Share on other sites More sharing options...
fninetwo Posted July 5, 2011 Share Posted July 5, 2011 What, why does everyone say the ASRock H55M-LE is bad and you should get a Gigabyte board if it works good? Does anyone of you have issues with the ASRock H55M-LE or is it a working board? Thanks Link to comment Share on other sites More sharing options...
pnasu Posted July 15, 2011 Share Posted July 15, 2011 What, why does everyone say the ASRock H55M-LE is bad and you should get a Gigabyte board if it works good? Does anyone of you have issues with the ASRock H55M-LE or is it a working board? Thanks I've got 10.6.8 running perfectly here, on that board. Link to comment Share on other sites More sharing options...
ivokik Posted August 4, 2011 Share Posted August 4, 2011 I've got 10.6.8 running perfectly here, on that board. And you have used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] ? Link to comment Share on other sites More sharing options...
pnasu Posted August 6, 2011 Share Posted August 6, 2011 And you have used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] ? Yep I used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] to install Snow Leopard. Since my last post Lion is running fine here aswell. Link to comment Share on other sites More sharing options...
Recommended Posts