ideneb 1.5.1 customization settings

[k-tech]

Does anyone know the right customization settings when installing ideneb 1.5.1 on a sony vaio e-series the specs are:

Processor:

AMD Phenom™ II X3 Processor P820

- 1.8 GHz

- 1.8 GHz HT

- 1.5MB L2 Cache

Operating System:

Genuine Windows® 7 Home Premium 64-bit

RAM :

4GB

Graphics card:

ATI Mobility Radeon™ HD 5145 Graphics

Screen type:

LCD

USB:

4 x USB 2.0

Modem/Ethernet 10Base-T/100Base-TX/1000Base-T

Wi-Fi 802.11 b/g/n

Bluetooth: Ver. 2.1+EDR

Video interface: VGA, HDMI

Audio interface: Microphone Jack Headphone Jack

TV output: VGA, HDMI

Sound Built-in stereo speakers

[tonyt1978]

Dude ... you need way more specific info.... Like instead of 10/100t or 10/100X 802.11g or whatever u wrote u need like: Realtek 8781B 802.11 10/100. you need BRAND NAMES. Not just speeds and amounts. Speeds and amounts mean nothing at all. You need to get every single vendor name of every single device in your machine. then we could make some recommendations. YOur windows version doesnt matter, your RAM amount doesnt matter, your screen type doesnt matter. Get exact vendors and model numbers. Get your exact chipset, your exact mobo model number and revision etc etc..... Try Again.

[k-tech]

Dude ... you need way more specific info.... Like instead of 10/100t or 10/100X 802.11g or whatever u wrote u need like: Realtek 8781B 802.11 10/100. you need BRAND NAMES. Not just speeds and amounts. Speeds and amounts mean nothing at all. You need to get every single vendor name of every single device in your machine. then we could make some recommendations. YOur windows version doesnt matter, your RAM amount doesnt matter, your screen type doesnt matter. Get exact vendors and model numbers. Get your exact chipset, your exact mobo model number and revision etc etc..... Try Again.

 

Architecture:

Platform

AMD Phenom™ II P820 Triple-Core Mobile Processor

Chipset

AMD M880G Chipset

 

CPU:

Processor Name

AMD Phenom™ II Triple-Core Processor P820

Processor Speed (GHz)

1.8

L2/L3 Cache (MB)

1.5

Frontside Bus (MHz)

3600MHz HyperTransport™ 3.0

Number of Cores

3

Drives:

Hard Drive Type

Serial ATA

Hard Drive Capacity (GB)

320

Hard Drive Speed (rpm)

5400

Optical Drive Type

DVD±RW/±R DL/RAM

Graphics:

Graphic Card Name

ATI Mobility Radeon™ HD 5145 Graphics

Video RAM memory (MB)

512

Total Graphics Memory

2300MB

HDMI Output

YES

VGA Output

1: mini D-sub 15p

Network Connectivity

Ethernet (RJ-45 Direct Port)

YES

Ethernet Type

10Base-T/100Base-TX/1000Base-T

Wireless LAN

YES

Wireless LAN Type

802.11 b/g/n

Wireless LAN Max. Date Rate (Mbps)

150 (RX)/150 (TX)

Bluetooth

YES

Bluetooth (version)

Ver. 2.1+EDR

Audio:

Dolby Codec

NO

Realtek HD Audio ( sorry couldn't find out what my audio driver is and i cannot get back into win 7 because i partitioned my hard drive so i kinda need to get mac working so i can reinstall win 7 =D)

[dothacker]

sorry couldn't find out what my audio driver is and i cannot get back into win 7 because i partitioned my hard drive so i kinda need to get mac working so i can reinstall win 7 =D)

 

First of:

That doesn't make any sense... you partitioned your HDD, and the only way to make your PC work is to install Mac?

 

Secondly:

We need the BRAND of the WIFI and the NIC you have on your board, not the speed it does. We need to know if it's a Broadcom, Marvell, Intel... all that good stuff...

 

Third:

Not so sure about your GFX card, it might be supported, it might not.

[k-tech]

First of:

That doesn't make any sense... you partitioned your HDD, and the only way to make your PC work is to install Mac?

 

Secondly:

We need the BRAND of the WIFI and the NIC you have on your board, not the speed it does. We need to know if it's a Broadcom, Marvell, Intel... all that good stuff...

 

Third:

Not so sure about your GFX card, it might be supported, it might not.

yes the only way to get my pc to work is to install mac, because i was not given a win 7 disc when i bought the laptop.

dude i really cannot find out the brand of my wifi and i don't even know what a NIC is ( im a noob with all the tech speak) ive got my laptop to get to the apple logo when i install ideneb but it just stays ther.

[k-tech]

First of:

That doesn't make any sense... you partitioned your HDD, and the only way to make your PC work is to install Mac?

 

Secondly:

We need the BRAND of the WIFI and the NIC you have on your board, not the speed it does. We need to know if it's a Broadcom, Marvell, Intel... all that good stuff...

 

Third:

Not so sure about your GFX card, it might be supported, it might not.

I think this is it;

Wifi-Realtek RTL8168/8111 Fanily PCI-E Gigabit

Ehternet NIC (NDIS6.0)