Jump to content
1 post in this topic

Recommended Posts

Hey guys.. I tried to follow this guide: http://www.insanelymac.com/forum/index.php...=132495&hl=

 

and it didnt work... Not sure what to do anymore... Can someone help? I got stuck at the hexedit part cuz it wont find the device ID no matter what :S I've been trying to figure it out for so long now but not sure what to do anymore...

 

here are the codes n stuff I found.

 

Linux Dump:

Codec Dump.txt

 

Codec: LSI ID 1040

Address: 1

Function Id: 0x2

Vendor Id: 0x11c11040

Subsystem Id: 0x103c137e

Revision Id: 0x100200

Modem Function Group: 0x1

 

 

Codec Dump 2

 

Codec: IDT 92HD75B2X5

Address: 0

Function Id: 0x1

Vendor Id: 0x111d7608

Subsystem Id: 0x103c363f

Revision Id: 0x100202

No Modem Function Group found

Default PCM:

rates [0x7e0]: 44100 48000 88200 96000 176400 192000

bits [0xe]: 16 20 24

formats [0x1]: PCM

Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1

GPIO: io=8, o=0, i=0, unsolicited=1, wake=1

IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0

IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0

IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0

IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0

IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0

IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0

IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0

IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0

Power-Map: 0x00

Analog Loopback: 0x00

Node 0x0a [Pin Complex] wcaps 0x400181: Stereo

Pincap 0x0000001c: OUT HP Detect

Pin Default 0x0121101f: [Jack] HP Out at Ext Rear

Conn = 1/8, Color = Black

DefAssociation = 0x1, Sequence = 0xf

Pin-ctls: 0x00:

Unsolicited: tag=01, enabled=1

Connection: 3

0x10 0x11* 0x17

Node 0x0b [Pin Complex] wcaps 0x400081: Stereo

Pincap 0x00001724: IN Detect

Vref caps: HIZ 50 GRD 80

Pin Default 0x01a11020: [Jack] Mic at Ext Rear

Conn = 1/8, Color = Black

DefAssociation = 0x2, Sequence = 0x0

Pin-ctls: 0x24: IN VREF_80

Unsolicited: tag=02, enabled=1

Node 0x0c [Pin Complex] wcaps 0x400081: Stereo

Pincap 0x00001724: IN Detect

Vref caps: HIZ 50 GRD 80

Pin Default 0x92a71130: [Fixed] Mic at Int Front

Conn = Analog, Color = Black

DefAssociation = 0x3, Sequence = 0x0

Misc = NO_PRESENCE

Pin-ctls: 0x24: IN VREF_80

Unsolicited: tag=00, enabled=0

Node 0x0d [Pin Complex] wcaps 0x400181: Stereo

Pincap 0x00000014: OUT Detect

Pin Default 0x90110110: [Fixed] Speaker at Int N/A

Conn = 1/8, Color = Unknown

DefAssociation = 0x1, Sequence = 0x0

Misc = NO_PRESENCE

Pin-ctls: 0x40: OUT

Unsolicited: tag=00, enabled=0

Connection: 3

0x10* 0x11 0x17

Node 0x0e [Pin Complex] wcaps 0x400081: Stereo

Pincap 0x00000024: IN Detect

Pin Default 0x40f000f9: [N/A] Other at Ext N/A

Conn = Unknown, Color = Unknown

DefAssociation = 0xf, Sequence = 0x9

Pin-ctls: 0x00:

Unsolicited: tag=00, enabled=0

Node 0x0f [Vendor Defined Widget] wcaps 0xf00181: Stereo

Unsolicited: tag=00, enabled=0

Connection: 3

0x10 0x11 0x17*

Node 0x10 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L

Amp-Out caps: N/A

Amp-Out vals: [0x73 0x73]

Converter: stream=0, channel=0

Power: setting=D0, actual=D0

Delay: 13 samples

Node 0x11 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L

Amp-Out caps: N/A

Amp-Out vals: [0x60 0x60]

Converter: stream=0, channel=0

Power: setting=D0, actual=D0

Delay: 13 samples

Node 0x12 [Audio Input] wcaps 0x1d0541: Stereo

Converter: stream=0, channel=0

SDI-Select: 0

Power: setting=D3, actual=D3

Delay: 13 samples

Connection: 1

0x1c

Processing caps: benign=0, ncoeff=0

Node 0x13 [Audio Input] wcaps 0x1d0541: Stereo

Converter: stream=0, channel=0

SDI-Select: 0

Power: setting=D3, actual=D3

Delay: 13 samples

Connection: 1

0x1d

Processing caps: benign=0, ncoeff=0

Node 0x14 [Pin Complex] wcaps 0x400100: Mono

Pincap 0x00000030: IN OUT

Pin Default 0x40f000f1: [N/A] Other at Ext N/A

Conn = Unknown, Color = Unknown

DefAssociation = 0xf, Sequence = 0x1

Pin-ctls: 0x00:

Connection: 1

0x16

Node 0x15 [Audio Selector] wcaps 0x300101: Stereo

Connection: 3

0x10 0x11 0x17*

Node 0x16 [Audio Mixer] wcaps 0x200100: Mono

Connection: 1

0x15

Node 0x17 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In

Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1

Amp-In vals: [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97]

Connection: 5

0x10 0x11 0x14 0x1a 0x1b

Node 0x18 [Pin Complex] wcaps 0x40000b: Stereo Amp-In

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00]

Pincap 0x00000020: IN

Pin Default 0x40f000f2: [N/A] Other at Ext N/A

Conn = Unknown, Color = Unknown

DefAssociation = 0xf, Sequence = 0x2

Pin-ctls: 0x00:

Node 0x19 [Vendor Defined Widget] wcaps 0xf0000b: Stereo Amp-In

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals:

Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out

Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-Out vals: [0x00 0x00]

Connection: 3

0x0b* 0x0c 0x0e

Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out

Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-Out vals: [0x00 0x00]

Connection: 3

0x0b* 0x0c 0x0e

Node 0x1c [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L

Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1

Amp-Out vals: [0x80 0x80]

Connection: 4

0x1a* 0x17 0x18 0x19

Node 0x1d [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L

Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1

Amp-Out vals: [0x80 0x80]

Connection: 4

0x1b* 0x17 0x18 0x19

Node 0x1e [Pin Complex] wcaps 0x400301: Stereo Digital

Pincap 0x00000010: OUT

Pin Default 0x40f000f4: [N/A] Other at Ext N/A

Conn = Unknown, Color = Unknown

DefAssociation = 0xf, Sequence = 0x4

Pin-ctls: 0x00:

Connection: 1

0x24

Node 0x1f [Pin Complex] wcaps 0x400701: Stereo Digital

Pincap 0x00010010: OUT EAPD

EAPD 0x0:

Pin Default 0x40f000f5: [N/A] Other at Ext N/A

Conn = Unknown, Color = Unknown

DefAssociation = 0xf, Sequence = 0x5

Pin-ctls: 0x00:

Power: setting=D0, actual=D0

Connection: 2

0x24* 0x25

Node 0x20 [Pin Complex] wcaps 0x400301: Stereo Digital

Pincap 0x00000010: OUT

Pin Default 0x40f000f6: [N/A] Other at Ext N/A

Conn = Unknown, Color = Unknown

DefAssociation = 0xf, Sequence = 0x6

Pin-ctls: 0x00:

Connection: 1

0x25

Node 0x21 [Audio Output] wcaps 0x40211: Stereo Digital

Converter: stream=0, channel=0

Digital:

Digital category: 0x0

PCM:

rates [0x7e0]: 44100 48000 88200 96000 176400 192000

bits [0xe]: 16 20 24

formats [0x5]: PCM AC3

Delay: 4 samples

Node 0x22 [Audio Output] wcaps 0x40211: Stereo Digital

Converter: stream=0, channel=0

Digital:

Digital category: 0x0

PCM:

rates [0x7e0]: 44100 48000 88200 96000 176400 192000

bits [0xe]: 16 20 24

formats [0x5]: PCM AC3

Delay: 4 samples

Node 0x23 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x24 [Audio Selector] wcaps 0x300101: Stereo

Connection: 3

0x21* 0x1c 0x1d

Node 0x25 [Audio Selector] wcaps 0x300101: Stereo

Connection: 3

0x22* 0x1c 0x1d

Node 0x26 [beep Generator Widget] wcaps 0x70000c: Mono Amp-Out

Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1

Amp-Out vals: [0x00]

Node 0x27 [Volume Knob Widget] wcaps 0x600000: Mono

Volume-Knob: delta=1, steps=127, direct=0, val=127

Connection: 2

0x10 0x11

 

From Windows:

Pinconfig already Flipped and converted to hex:

 

<00A71C1F 00A71D10 00A71E21 00A71F01 00B71C20 00B71D10 00B71EA1 00B71F01 00C71C30 00C71D11 00C71EA7 00C71F92 00D71C10 00D71D01 00D71E11 00D71F90 00E71CF9 00E71D00 00E71EF0 00E71F40 01471CF1 01471D00 01471EF0 01471F40 01871CF2 01871D00 01871EF0 01871F40 01E71CF4 01E71D00 01E71EF0 01E71F40 01F71CF5 01F71D00 01F71EF0 01F71F40 02071CF6 02071D00 02071EF0 02071F40>

 

From SL 10.6.4

Some Voodoohelpertool -dump

 

Probing codec #0...

HDA Codec #0: ATI RS690/780 HDMI

HDA Codec ID: 0x1002791a

Vendor: 0x1002

Device: 0x791a

Revision: 0x00

Stepping: 0x00

PCI Subvendor: 0x363f103c

startNode=1 endNode=2

Found audio FG nid=1 startNode=2 endNode=4 total=2

 

Processing audio FG cad=0 nid=1...

Powering up...

Parsing audio FG...

GPIO: 0x00000000 NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0

nid 3 0x18560010 as 1 seq 0 Digital-out Jack jack 6 loc 24 color Unknown misc 0

Parsing vendor patch...

VHDevice NID=2 Config=00000000 Type=00000000 Cap=00000000 Ctrl=00000000 -- Conns:

VHDevice NID=3 Config=18560010 Type=00000004 Cap=00000094 Ctrl=00000040 -- Conns: 0=2

Disabling nonaudio...

Disabling useless...

Patched pins configuration:

nid 3 0x18560010 as 1 seq 0 Digital-out Jack jack 6 loc 24 color Unknown misc 0

Parsing pin associations...

1 associations found:

Association 0 (1) out:

Pin nid=3 seq=0

Redir type=-1 jack=0 def=0

Building AFG tree...

Tracing association 0 (1)

Tracing pin 3 with min nid 0

tracing via nid 3

tracing via nid 2

nid 2 returned 2

nid 3 returned 2

Pin 3 traced to DAC 2

Association 0 (1) trace succeeded

Tracing input monitor

Tracing other input monitors

Tracing beeper

Disabling unassociated widgets...

Disabling nonselected inputs...

Disabling useless...

Disabling crossassociated connections...

Disabling useless...

Binding associations to channels...

Assigning names to signal sources...

Parsing Ctls...

Assigning mixers to the tree...

Preparing pin controls...

AFG commit...

Creating PCM devices...

pcmAttach: HDA ATI RS690/780 HDMI PCM #0 HDMI at cad 0 nid 1

+--------------------------------------+

| DUMPING PCM Playback/Record Channels |

+--------------------------------------+

 

Playback:

 

Stream cap: 0x00000005

AC3 PCM

PCM cap: 0x00020040

16 bits, 48 KHz

DAC: 2

 

+-------------------------------+

| DUMPING Playback/Record Paths |

+-------------------------------+

 

Playback:

 

nid=3 [pin: Digital-out (HDMI)]

|

+ <- nid=2 [audio output] [src: pcm] bindSeq=00000001

 

 

+-------------------------+

| DUMPING Volume Controls |

+-------------------------+

 

OSS mixer initialization...

Registering PCM channels...

FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref

HP switch init...

 

+-------------------+

| DUMPING HDA NODES |

+-------------------+

 

Default Parameter

-----------------

Stream cap: 0x00000001

PCM

PCM cap: 0x00020040

16 bits, 48 KHz

IN amp: 0x00000000

OUT amp: 0x00000000

 

nid: 2

Name: audio output

Widget cap: 0x00000201

DIGITAL STEREO

Association: 0 (0x00000001)

OSS: pcm (pcm)

Stream cap: 0x00000001

PCM

PCM cap: 0x00020040

16 bits, 48 KHz

 

nid: 3

Name: pin: Digital-out (HDMI)

Widget cap: 0x00400381

DIGITAL UNSOL STEREO

Association: 0 (0x00000001)

Pin cap: 0x00000094

PDC OUT HDMI

Pin config: 0x18560010

Pin control: 0x00000040 OUT

connections: 1 enabled 1

|

+ <- nid=2 [audio output]

Link to comment
https://www.insanelymac.com/forum/topic/235642-audio-help-idt/
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...