Kernel Panic on DVD boot with 4 different releases. Shuttle XS35GT ION2 Atom D510. Photos + Hardware Info

[FROZTY-UK]

Hi there,

 

I recently purchased a Shuttle XS35GT barebones system, and installed 2GB DDR2 800mhz laptop memory and a onyx sata II 32GB ssd. The system features nVidia ION2.

 

System Specifications:

SHUTTLE XS35GT

• Intel Dual-Core Atom D510 (Pineview-D)
  
  -Intel Hyper-Threading (2-threads per core)
  
  
  -Intel 64 architecture, Core clock: 1.66ghz
  
  
  -L2 Cache: 1024kB

  
  

• Intel NM10 Express Chipset (Tiger Point)
  
• ACPI 3.0
  
• nVidia ION2 Graphics
  
  -512MB DDR3 Video Ram

  
  

• 4-in-1 card reader
  
• IDT 92HD81 Audio Codec with Azalia support
  
• JMC261 Ethernet Controller
  
• Realtek RTL8191SE Wireless Chipset
  
• OCZ Onyx 32GB SATA II SSD
  
• Crucial 2GB DDR2 800Mhz/PC2-6400 Laptop Memory
  

 

Hardware IDs:

00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)

00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)

00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)

00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)

00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02)

00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)

00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)

00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)

00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)

00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)

00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)

00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 02)

00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)

01:00.0 VGA compatible controller: nVidia Corporation GT218 [iON] (rev a2)

01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)

02:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 80)

02:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 80)

02:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 80)

02:00.5 Ethernet controller: JMicron Technology Corp. JMC260 PCI Express Fast Ethernet Controller (rev 02)

03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvA Wireless LAN Controller (rev ff)

 

I haven't installed a slimline CD/DVD drive therefore I'm using a external USB DVD drive. I'm using a USB keyboard and mouse.

 

The problem:

Basically, I plug the external dvd drive in a spare usb port, put the ideneb DVD in, and turn the pc on. When the system boots from the DVD, i press any key to go to the installation. A few things load on that page, and then advances to the grey apple boot screen where i get a kernel panic message... I have tried 4 distributions and i get same message on each one.. I have taken photos of each error message. See below...

 

iatkos v7

 

iDeneb 1.5

 

iDeneb 1.4

 

iPC OSX86 10.5.6

 

 

Any help would be greatly appreciated!!!!!!!!

 

Thanks in advance,

-Frozty

[Bumfluff]

Ehmmm Backtrace (CPU0)

 

Try booting With -v cpus=1 from the dvd

[FROZTY-UK]

Ehmmm Backtrace (CPU0)

 

Try booting With -v cpus=1 from the dvd

 

 

o wow! i tried that before and it didnt work! but i entered it right now and it worked!!

i think i must have typed cpus=1 -v instead.

 

 

Thanks alot!!

 

 

//EDIT: This only worked with ideneb 1.4! I still have the problem with ideneb 1.5! Also, ive just tried iatkos s3 v2 and have the same problem!

[Bumfluff]

Well I Must Say Your Best Bet Would Be To Install With IDeneb 1.4 And Just Upgrade ?

[FROZTY-UK]

Well I Must Say Your Best Bet Would Be To Install With IDeneb 1.4 And Just Upgrade ?

 

I installed iDeneb 1.4 yesterday, and chose the cpus=1 fix but after reboot i got the error message again....

[Bumfluff]

I Think Not Too Sure But There I A Kernel That Is Specially Patched For The Atom Dual Core Not Too Sure Ask Around

[epete]

I have the same machine. I used the "Kalyway_10.5.2_DVD_Intel_Amd" install and it worked. Just burned the DVD and it booted right up no problem. Didn't even have to use a separate boot DVD.

 

My problem is the Ethernet isn't working - JMC261

 

Also, sound isn't working - IDT92HD81

 

If you find fixes, let me know. Also I plan to test the "iATKOS_S3_v2" version to see if that gives me better results.

[Emre SUMENGEN]

I have the same machine. I used the "Kalyway_10.5.2_DVD_Intel_Amd" install and it worked. Just burned the DVD and it booted right up no problem. Didn't even have to use a separate boot DVD.

 

My problem is the Ethernet isn't working - JMC261

 

Also, sound isn't working - IDT92HD81

 

If you find fixes, let me know. Also I plan to test the "iATKOS_S3_v2" version to see if that gives me better results.

 

Hi epete,

Have you had any progress with iATKOS S3?

 

I have a similar system (Jetway JBC600C99-52W with Atom D525 and Nvidia ION 2 - IDs show Nvidia GT218 rev A2 or smth. like that) and have had errors regarding my cpu not being recognized :pirate2:

 

If there was a solution to that, I'd love to hear it. (I've already tried disabling HT off in BIOS and/or cpus=1 to no avail)

 

Thanks