_Ombra_ Posted October 26, 2010 Share Posted October 26, 2010 Hi guys, after being stuck on an old hackintosh using 10.5.6 i decided to update my installation to get to know new techniques and softwares. After a couple of days i finally got my new hackintosh to work (and from which i'm writing this post ). My specs: Motherboard AOpen i945Gm-PILF (BIOS 1.08) Memory 2Gb DDR2 Video GeForce 8400 GS 512Mb My procedure was: -Created Chameleon BootCD RC5 r3xx + FakeSMC 2.5 (Snow) + AppleACPIPS2Nub (Snow) + VoodooPS2Controller (Snow) + Qoopz Legacy 10.6.4 Kernel. -Installed retail 10.6.3. -Installed Chameleon EFI using unofficial installer of RC5 r602 and added all kext to Extra\Extensions -Updated to 10.6.4 After i dedicated about half a day fixing a lot of stuff. There i learned about DSDT (which fixed the cmos reset issue), fixed PS2 Keyboard+Mouse combination, inserted EFI string for video card, created a network driver based off of the 10.6.4 IONetworkingFamily and got audio working using AppleAzaliaAudio. Now there are a couple of things that bothers me. 1. I tried to get the audio to work using VoodooHDA without luck. With AppleAzaliaAudio i only have 2 channels output but no input. My device/ven id is 8086:27d8. Any ideas how i can get VoodooHDA to work? 2. Sleep doesn't work properly and the power button doesn't work either even if i have Sleepenabler that came with the legacy kernel. The pc does go to sleep but after i wake it i have various issues. The performance is not the same and when i shut it of i get KP. Power button just doesn't work. Any ideas on that??? 3. The disk with my OS X installation is connected to the 4th SATA port and i like the funcionality of Chameleon to boot other OSes directly from the menu... but when i try to boot XP it doesn't work. I need to boot directly from the Boot selection menu of the bios for it to work. I'm just lost with that. Ideas? Hope somebody can enlighten me NOTE: If you guys are interested in a compiled ISO of the BootCD for this board plus the drivers for 10.6.4 please let me know Link to comment https://www.insanelymac.com/forum/topic/235340-almost-perfect-1064-aopen-i945gm-pilf/ Share on other sites More sharing options...
MaLd0n Posted October 26, 2010 Share Posted October 26, 2010 what is your processor? you can send me the DSDT and a kextstat? Link to comment https://www.insanelymac.com/forum/topic/235340-almost-perfect-1064-aopen-i945gm-pilf/#findComment-1570284 Share on other sites More sharing options...
_Ombra_ Posted October 26, 2010 Author Share Posted October 26, 2010 Here they are... i hope the DSDT is the last one because i made so many tests.... I included the current .aml just in case but i don't know if there is a way to decompile that. The processor is a mere Pentium 4 3.01 Ghz Let me know if you find something. I understand the power button is fixable via the DSDT but i din't manage to make it work. i945pilf.zip Link to comment https://www.insanelymac.com/forum/topic/235340-almost-perfect-1064-aopen-i945gm-pilf/#findComment-1570296 Share on other sites More sharing options...
_Ombra_ Posted October 27, 2010 Author Share Posted October 27, 2010 MaLd0n, any news? Link to comment https://www.insanelymac.com/forum/topic/235340-almost-perfect-1064-aopen-i945gm-pilf/#findComment-1571142 Share on other sites More sharing options...
Recommended Posts