braunshedd Posted July 14, 2010 Share Posted July 14, 2010 hi, im trying to get the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]+[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] method to work, but no matter what i do, cpus=1, -x, -v, -s, they never seem to work.. I dont have the option of changing my sata mode, so im not sure if it is on ahci. here are my current hardware specs Hp pavilion a6600f Pentium E2200 © 2.2 GHz (65W NVIDIA GeForce 7100 / NVIDIA nForce 630i Memory Installed 3 GB 320 GB SATA 3G Integrated graphics Link to comment Share on other sites More sharing options...
Gringo Vermelho Posted July 14, 2010 Share Posted July 14, 2010 What model southbridge/drive controller? Try adding the drive controller injector kexts that come with the Chameleon bootloader official download to your boot CD. Link to comment Share on other sites More sharing options...
braunshedd Posted July 14, 2010 Author Share Posted July 14, 2010 What model southbridge/drive controller? Try adding the drive controller injector kexts that come with the Chameleon bootloader official download to your boot CD. ok acording to pc wizard, i have 2 disk controllers, both of them are nvidia MCP73 IDE. one does not support ahci, the other does. this confuses me because my hard drive and cd rom drive are sata, but acording to pc wizard, they are ata drives not sata. i cant find any documentation. also, the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] supported that i am using comes with tons of kexts built in. Link to comment Share on other sites More sharing options...
Gringo Vermelho Posted July 15, 2010 Share Posted July 15, 2010 both of them are nvidia MCP73 IDE Then you should go here: http://www.insanelymac.com/forum/index.php?showtopic=184224 Link to comment Share on other sites More sharing options...
Recommended Posts