mruno Posted June 13, 2010 Share Posted June 13, 2010 does anyone have the modified bios for the f3sa (F3Saas.303_mod.zip)? the link from http://www.insanelymac.com/forum/index.php...505&hl=f3sa is dead Link to comment Share on other sites More sharing options...
Nurettin Posted July 30, 2010 Share Posted July 30, 2010 I have F3JC. how can I modify my bios? Because my bluetooth not working... And dou you use Fn keys? in my notebook Fn+F1 works Fn+F5 works Fn+F6 works. the others don't work. Link to comment Share on other sites More sharing options...
encaputxat Posted October 8, 2010 Share Posted October 8, 2010 re-up, i need the kext. Links are dead! My cpu is only working at 1.2Ghz from 2.0 (F3Sc) Netkas link to nullcpu is down xD Link to comment Share on other sites More sharing options...
x25c54 Posted November 29, 2010 Share Posted November 29, 2010 Hi guys!Tomorrow I'll re-upload kexts and I'll try to copy my current modded BIOS actually I have tried to boot system even without dsdt and it worked Smo3 - did you ever get a change to upload these files? I am looking of the modded BIOS (2 cores) for the F3Sv and any drivers that you have handy. Link to comment Share on other sites More sharing options...
effatum Posted December 10, 2010 Share Posted December 10, 2010 64bit enabled dsdt.aml patched correctly 8600m gs 256mb detected properly all working fine (execpt the camera and i will check on that) i'll try to map any temp sensors if i can find some info for now i am stuck with hdd and core temps dvi-out working fingerprint sensor is shown in system profiler i'll try to use a 3rd party program for that asus f3sv-a3 -with modded bios t7800 2 -cores working in 64bit 8600m gs 256mb -dvi-vga out tested both working but no idea on s-video 3gb ram -more than enough 250gb hdd -will be changed all usb ports tested and working Link to comment Share on other sites More sharing options...
tut126 Posted December 15, 2010 Share Posted December 15, 2010 64bit enableddsdt.aml patched correctly 8600m gs 256mb detected properly all working fine (execpt the camera and i will check on that) i'll try to map any temp sensors if i can find some info for now i am stuck with hdd and core temps dvi-out working fingerprint sensor is shown in system profiler i'll try to use a 3rd party program for that asus f3sv-a3 -with modded bios t7800 2 -cores working in 64bit 8600m gs 256mb -dvi-vga out tested both working but no idea on s-video 3gb ram -more than enough 250gb hdd -will be changed all usb ports tested and working What tutorial did u use to get vanilla OSX working on your f3sv system. I am very confused. Thanks Tut126 Link to comment Share on other sites More sharing options...
effatum Posted December 19, 2010 Share Posted December 19, 2010 What tutorial did u use to get vanilla OSX working on your f3sv system. I am very confused. Thanks Tut126 go to the first page? if you pass thru the start do not collect 20000 dollars. Link to comment Share on other sites More sharing options...
phobik Posted January 6, 2011 Share Posted January 6, 2011 go to the first page? if you pass thru the start do not collect 20000 dollars. What is the latest version that worsk best in Asus F3SV? Has anyone used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]? Link to comment Share on other sites More sharing options...
effatum Posted January 6, 2011 Share Posted January 6, 2011 didn't really get the question. if you are talking about a normal install i am 10.6.5 if u are talkin about a bundle, i have no idea Link to comment Share on other sites More sharing options...
nunoguilherme Posted January 10, 2011 Share Posted January 10, 2011 Hey.. I did everything as said on the tuturial.. but i think I'm having problems with the dsdt.aml. When I reboot after install and after copying the dsdt.aml into my MacOSx volume, I get the "You need to restart your computer by pressing the power button". Anyone can get be a dsdt.aml for the F3SC? i used the one on the boot 132 iso... thank you PS: I also flashed my BIOS with the modified one found here: http://www.insanelymac.com/forum/index.php...0505&st=120 Link to comment Share on other sites More sharing options...
effatum Posted January 10, 2011 Share Posted January 10, 2011 Hey.. I did everything as said on the tuturial.. but i think I'm having problems with the dsdt.aml. When I reboot after install and after copying the dsdt.aml into my MacOSx volume, I get the "You need to restart your computer by pressing the power button". Anyone can get be a dsdt.aml for the F3SC? i used the one on the boot 132 iso... thank you PS: I also flashed my BIOS with the modified one found here: http://www.insanelymac.com/forum/index.php...0505&st=120 create a dsdt.aml... with dsdt patcher and use that rather than the one in the boot123 Link to comment Share on other sites More sharing options...
manouille Posted January 10, 2011 Share Posted January 10, 2011 Hi i will begin the hack this evening i can't post in real time the step by step progression thanks Link to comment Share on other sites More sharing options...
effatum Posted January 10, 2011 Share Posted January 10, 2011 Hi i will begin the hack this evening i can't post in real time the step by step progression thanks good to know. Link to comment Share on other sites More sharing options...
nunoguilherme Posted January 10, 2011 Share Posted January 10, 2011 create a dsdt.aml... with dsdt patcher and use that rather than the one in the boot123 I've tried to create my own, but when I run dsdt patcher it fetches the original through ioreg, but when it proceeds to try and patch it it says that dsdt.dsl could not be open. Not sure if this is happening because I am using the terminal within the installer app. Link to comment Share on other sites More sharing options...
effatum Posted January 10, 2011 Share Posted January 10, 2011 I've tried to create my own, but when I run dsdt patcher it fetches the original through ioreg, but when it proceeds to try and patch it it says that dsdt.dsl could not be open. Not sure if this is happening because I am using the terminal withing the installer app. dsdt.aml after being created thrue the patcher is already enough for your daily use, if you want to recompile it there is other tools first try it with the one created from the patcher itself, it gets from bios (in theory) and it will absolutely work better than none/wrong dsdt... Link to comment Share on other sites More sharing options...
nunoguilherme Posted January 10, 2011 Share Posted January 10, 2011 dsdt.aml after being created thrue the patcher is already enough for your daily use, if you want to recompile it there is other tools first try it with the one created from the patcher itself, it gets from bios (in theory) and it will absolutely work better than none/wrong dsdt... hm... the only new file on the DSDT Patcher dir is one called dsdt.dat. can I rename that one and use it? not sure where I'm going wrong... PS- a bit of a noob here... thank you for your patience... Link to comment Share on other sites More sharing options...
nunoguilherme Posted January 12, 2011 Share Posted January 12, 2011 I cant generate my dsdt.aml can someone help me please? Link to comment Share on other sites More sharing options...
effatum Posted January 13, 2011 Share Posted January 13, 2011 buddy u usin this one ? http://www.insanelymac.com/forum/index.php?showtopic=133683 Link to comment Share on other sites More sharing options...
CobraKhan007 Posted February 16, 2011 Share Posted February 16, 2011 Anybody gotten the GMAX3100 with the Asus F3E to work with QE/CI? Got it running with osx10.6.6 in safe graphics mode. ;( It refuses to boot with arch=i386, the dreaded waiting for boot device error. Cobrakhan007 Found a work around running GMAX3100 in 64 bit mode. As far as i know GMAX3100 is now 32 bit only from 10.6.3 and up. But got it to work with the vanilla kext's from 10.6.2 under 64 bit. Replaced all 10.6.6 AppleIntelGMA* kext's with the ones from 10.6.2. Replaced the AppleIntelIntegratedFramebuffer.kext with the one from 10.6.2 In /SystemLibrary/Frameworks replaced the OpenAL/OpenCL/OpenGL framworks whit the ones from 10.6.2 Used Osx86Tools to enable Quartz GL. Also used switchResX to get the right res setting for my laptop lcd. had the white screen with black bar problem. Rebooted and it worked for me. hope this helps a bit. Link to comment Share on other sites More sharing options...
golf2 Posted June 10, 2011 Share Posted June 10, 2011 Hello!! Great job there smo3, and other that have been working on Leopard. I will install the "snow" in the Asus F3Sc Well, i'm wondering if the link for the kext's can be renewed. Thank you in advance, Link to comment Share on other sites More sharing options...
jahdrien Posted September 16, 2011 Share Posted September 16, 2011 Hi, I successfully installed iAtkos S3 V2 on my Asus F3SV AK143C (Intel Core 2 Duo T7500, NVIDIA 8600M GS, Atheros L1 Ethernet, Intel 4965 ABGN) then I updated to OS X 10.6.8 succesfully too! Here are the options I selected from custom panel before install: - AsereBLN - Graphics Enabler - -pci1 - Voodoo HDA - UNSELECT Apple HDA - Voodoo PS2 - Battery - Card Reader - Attansic L1 This way you have keyboard, mouse, graphics and ethernet working properly and you'll be able to make the 10.6.8 update (do not install SleepEnabler or AppleHDA before update or it will cause kernel panic). !! No drivers available for Intel Wifi 4965AGN !! 1 Link to comment Share on other sites More sharing options...
Scaevola Posted October 5, 2011 Share Posted October 5, 2011 I tried installing iAtkos S3 v2 to my F3jc Notebook with Core 2 Duo T5600 and Geforce Go 7300, but no matter what I use for dsdt, I am getting the same kernel panic error with "should have 2 cores but only found 3". I tried without dsdt with generic dsdt on boot-132 disk with patched dsdt (gave an error during patching) I also tried booting with cpus=1, but it did not work either. What else can I do to overcome this problem? Link to comment Share on other sites More sharing options...
Recommended Posts