Jump to content

Another Disk not showing Thread

Nixwiz

By Nixwiz,
in NVMe/SATA/IDE Controllers

 Share
6 posts in this topic

Recommended Posts

Nixwiz
Nixwiz
Posted
Posted

Hello Community

 

After reading for Days now on this subject, I just dont now, what to do next

 

Maybe some1 has a hint for me, would be much appreciated

 

I got a Jmicron ESATA PCI Card connected with an extern Samsung 1,5tb disk.

 

The Volumes on this Disk dont show up in Leopard 10.6.2 (System Specs in Signature)

 

On my Mobo i have also an Jmicro 363 sata controller working without problems

 

 

 

 

All intern SATA Disks show up just fine

 

Here are the Infos about this card collected under Win7 using Everest:

 

JMicron JMB36X RAID Controller

Treiberdatum	24.03.2006

Treiberversion	1.6.1.0

Treiberanbieter	JMicron Technology Corp.

INF-Datei	oem7.inf

Hardwarekennung	PCI\VEN_197B&DEV_2363&SUBSYS_2363197B&REV_03

Positionsinformationen	@system32\DRIVERS\pci.sys,#65536;PCI bus %1, device %2, function %3;(2,0,0)

PCI-Ger‰te	JMicron JMB363 SATA-II RAID Controller



Ger‰teressourcen	

IRQ	16

Speicher	F9000000-F9001FFF

Port	7000-7007

Port	7400-7403

Port	7800-7807

Port	7C00-7C03

Port	8000-800F

02:00.0 0104: 197b:2363 (rev 03)

 

I read a lot here about putting deviceid into .plist files, did all that with no sucess

 

After using LegacyJMB36xSATA.kext it shows in about this Mac/Sata, but no Volumes

 

Bios Settings are all at AHCI, I´m using a Clean Vanilla Install with the following .kexts:

 

 

 

 

  • - AHCIPortInjector.kext
     
    - AppleHDA.kext
     
    - AppleIntelPIIXATA.kext
     
    - ATAPortInjector.kext
     
    - Disabler.kext
     
    - fakesmc.kext
     
    - IOAHCIBlockStorageInjector.kext
     
    - JMicronATAInjector.kext
     
    - LegacyAppleYukon2.kext
     
    - LegacyJMB36xSATA.kext
     
    - NullCPUPowerManagement.kext
     
    - OpenHaltRestart.kext
     
    - PlatformUUID.kext
     
    - SleepEnabler.kext

 

 

 

 

Any Idea, what I can try to solve this?

 

Thx in advance

Link to comment
https://www.insanelymac.com/forum/topic/212151-another-disk-not-showing-thread/
Share on other sites
Nixwiz
Nixwiz
Posted
  • Author
Posted

Getting mad with this thing, have tried dsdt hacks, different kexts, anything I found on simular Topics here, no success at all

 

Close to a hundred reboots just today :(

 

I´m adding my lspci outputs, maybe this can help?

 

 

 

 

lspci

00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02)

00:01.0 PCI bridge: Intel Corporation 82P965/G965 PCI Express Root Port (rev 02)

00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)

00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)

00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)

00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)

00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)

00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)

00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)

00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02)

00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)

00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)

00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)

00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)

00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02)

00:1f.2 SATA controller: Intel Corporation 82801HR/HO/HH (ICH8R/DO/DH) 6 port SATA AHCI Controller (rev 02)

00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)

01:00.0 VGA compatible controller: nVidia Corporation G80 [GeForce 8800 GTS] (rev a2)

03:00.0 RAID bus controller: JMicron Technology Corp. 20360/20363 Serial ATA Controller (rev 03)

04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)

05:00.0 SATA controller: JMicron Technology Corp. 20360/20363 Serial ATA Controller (rev 02)

05:00.1 IDE interface: JMicron Technology Corp. 20360/20363 Serial ATA Controller (rev 02)

06:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

 

lspci -n

00:00.0 0600: 8086:29a0 (rev 02)

00:01.0 0604: 8086:29a1 (rev 02)

00:1a.0 0c03: 8086:2834 (rev 02)

00:1a.1 0c03: 8086:2835 (rev 02)

00:1a.7 0c03: 8086:283a (rev 02)

00:1b.0 0403: 8086:284b (rev 02)

00:1c.0 0604: 8086:283f (rev 02)

00:1c.1 0604: 8086:2841 (rev 02)

00:1c.4 0604: 8086:2847 (rev 02)

00:1c.5 0604: 8086:2849 (rev 02)

00:1d.0 0c03: 8086:2830 (rev 02)

00:1d.1 0c03: 8086:2831 (rev 02)

00:1d.2 0c03: 8086:2832 (rev 02)

00:1d.7 0c03: 8086:2836 (rev 02)

00:1e.0 0604: 8086:244e (rev f2)

00:1f.0 0601: 8086:2810 (rev 02)

00:1f.2 0106: 8086:2821 (rev 02)

00:1f.3 0c05: 8086:283e (rev 02)

01:00.0 0300: 10de:0193 (rev a2)

03:00.0 0104: 197b:2363 (rev 03)

04:00.0 0200: 11ab:4364 (rev 12)

05:00.0 0106: 197b:2363 (rev 02)

05:00.1 0101: 197b:2363 (rev 02)

06:06.0 0c00: 104c:8024

 

greetz

MacUser2525
MacUser2525
Posted
Posted

Don't know if you have seen this thread it could be worth a try never worked for me when I tried to get one of them cards working though. I finally went with the card in my signature for e-SATA works well in both 32/64bit mode if that is important to you and will save you a lot of hassle with working out of the box drivers available just download then install for fully working solution.

 

http://www.insanelymac.com/forum/index.php?showtopic=186558

Nixwiz
Nixwiz
Posted
  • Author
Posted

thx MacUser2525 for your replay, I have work myself through this thread with no success

 

The funny thing is, after 2 days work on this (and i had really better things 2 do) I took the disk out, put it on an internal sata port, installed new, and took over all data with migration assistant from my former system

I put in a less important disk into the esatabox, and what happened? It shows up^^

 

Dont understand, how and why, but its there finally, hotplugging seems not yet to work fully ( dont unmounts when unplugging), but that is now an minor issue

 

Might be that I am now on 32bit sys, former sys was 64bit, no idea why, used the same install prozedere

 

Anyhow, for today i´m finished, night is over for me in 4 hours, will have a closer look into it, when i find time again

 

greetz

MacUser2525
MacUser2525
Posted
Posted
It shows up^^

 

Dont understand, how and why, but its there finally, hotplugging seems not yet to work fully ( dont unmounts when unplugging), but that is now an minor issue

 

Might be that I am now on 32bit sys, former sys was 64bit, no idea why, used the same install prozedere

 

Anyhow, for today i´m finished, night is over for me in 4 hours, will have a closer look into it, when i find time again

 

greetz

 

That would be it the card I had before a Sonnet Tempo only would work in 32bit using 64bit nothing showed up, not sure on the hot plug but the one I have now works fully if you ever do need all the features it is worth considering.

 Share
Go to topic listing
×
×
  • Create New...