casual21 Posted February 9, 2010 Share Posted February 9, 2010 Im having trouble installing leopard on my new computer, i will post specs and pics belows, im doing the method of retail on the usb and booting up that way,i get to where i can pick the usb drive it begins loading darwin then i get a kernal panic. here are pictures and specs Mainboard : Gateway WG43M Chipset : Intel G43/G45 Processor : Intel Pentium Dual-Core @ 2600 MHz Physical Memory : 6144 MB Video Card : Intel® G45/G43 Express Chipset Hard Disk : WDC (640 GB) DVD-Rom Drive : ATAPI DVD A DH16AASH Monitor Type : Hewlett Packard HP w1907 - 19 inches Network Card : 82567V-2 Gigabit Network Connection Network Card : 82567V-2 Gigabit Network Connection Operating System : Windows 7 Home Premium Home Edition 6.01.7600 (x64) DirectX : Version 11.00 Windows Performance Index : 3.5 Link to comment https://www.insanelymac.com/forum/topic/210385-problem-booting-retail-leopard/ Share on other sites More sharing options...
Unf0rgiven Posted February 10, 2010 Share Posted February 10, 2010 im getting same kernel panic error screen right after rebooting on completing SL installation...Mac HD partition is already set to 'active'. please any idea how to fix it on Windows ONLY bcz i have no MAC available around. i think i know the solution but i watched a tutorial where they shown how to fix it from runing MAC by installing Chemeleon 2 RC3 n then installation of EasyBCD on Windows for dual booting My specs: Sony Vaio CR220E/R: Core 2 Due 2.0Ghz / GMA X3100 VGA / 2GB DDR2 RAM / Serial ATA HDD 200GB / OS Windows 7 64bit Link to comment https://www.insanelymac.com/forum/topic/210385-problem-booting-retail-leopard/#findComment-1407294 Share on other sites More sharing options...
Recommended Posts