cbetlyon Posted November 26, 2009 Share Posted November 26, 2009 Hey guys I've done a lot of reaserch, i just wanted to check wiht every one here about how my system is and if I will have any problems. I plan on following the lifehacker install guide if that matters for 10.6.x. Hardware- Case: COOLER MASTER Stacker 830 Evolution RC-830-KKN3-GP Black Aluminum ATX Full Tower Mother board: GIGABYTE GA-EX58-UD5 LGA 1366 Intel X58 ATX Video card: XFX HD-487A-ZWFC Radeon HD 4870 1GB 256-bit GDDR5 PCI Express 2.0 x16 Power supply: Rosewill Green Series RG530-2 530W Processor: Intel Core i7-950 Bloomfield 3.06GHz LGA 1366 Memory: CORSAIR XMS3 12GB (6 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Storage: (2x) Western Digital Caviar Black WD1001FALS 1TB 7200 RPM SATA 3.0Gb/s 3.5" (1x)Western Digital Caviar Green WD15EADS 1.5TB SATA 3.0Gb/s 3.5" Ethernet Adapter: NETGEAR GA311 10/ 100/ 1000Mbps PCI Gigabit Adapter with Jumbo Frame support Any input would be greatly appreciated. Link to comment https://www.insanelymac.com/forum/topic/199640-hope-im-on-the-right-track/ Share on other sites More sharing options...
Qianlong Posted November 26, 2009 Share Posted November 26, 2009 Wouldn't it be cheaper to buy a D0 stepping Core i7 920 and OC it to 3.2 Ghz? I've been running a 920 OC to 3.2Ghz for 2 months now. with the movie saved you could buy more Hdds, a modular PSU and ram with better CAS latency? I see the corsair ram has cas 9 OCZ = cas 7 http://www.newegg.com/Product/Product.aspx...7-381-_-Product and don't forget to buy some 3rd party silent case fans if you want a quiet set up. http://www.silentpcreview.com/ Good luck with your build Link to comment https://www.insanelymac.com/forum/topic/199640-hope-im-on-the-right-track/#findComment-1343418 Share on other sites More sharing options...
Recommended Posts