lacina Posted November 4, 2009 Share Posted November 4, 2009 Hi all, Im having problems getting the my iATKOS 7 fully up and running. What I have done: Got My SoundBlaster Audigy2 Card working (kXAudioDriver) Got My PS2 Keyboard Working ( Voodoo PS/2 Driver) Removed AppleHPET.kext to allow USB Drives to mount Geforce 7900GS 512MB PCI-E Quartz GL enabled via OSx86 Tools Utility Added Geforce's String to boot.plist via OSx86 Tools Utility What I havnt Done: Got my Geforce 7900GS working with Quartz Extreme and be able to change resolutions Managed to Get system booting without iATKOS DVD and rd=disk0s2 Got my PCI Belkin G wireless adaptor working Got my Ethernet Working BlackGold TV Card working?? Optional My install options: All defaults plus:+ DRIVERS - VGA- NVIDIA - EFI String for NVIDIA - DVI/DVI + DRIVERS - VGA- NVIDIA - Enablers - NVEnabler+ DRIVERS - SYSTEM - SATA SATA/ATA - JMICRON+ DRIVERS - SYSTEM - SATA SATA/ATA - VIa (Not sure if this is needed)+ DRIVERS - SYSTEM - Cardbus Driver + DRIVERS - SYSTEM - USB+ DRIVERS - SYSTEM - SOUND - AZALIA+ DRIVERS - SYSTEM - SOUND - Voodoo HDA Driver()?????????+ DRIVERS - SYSTEM - PS/2 Mouse/Keyboard - Voodoo PS/2 Driver+ DRIVERS - SYSTEM - NETWORK - WIRELESS - BROADCOM BCM43xx My hardware: Asus P5VD2-MX Motherboard (has azalia audio, Ethernet, SATA, i disabled ethernet in BIOS)Intel C2D 1.862GB RAM1x IDE Harddrive set as Primary Master1x IDE DVDRW set as Secondary masterGainward 7900GS 512MBBelkin G+ wireless adaptor (F5D7001)Soundblaster Audigy 2 Sound Card (onboard sound disabled)BlackGold DVB-T PCI TV Tuner Ouput of lspci: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [1106:0327] 00:00.1 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [1106:1327] 00:00.2 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [1106:2327] 00:00.3 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [1106:3327] 00:00.4 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [1106:4327] 00:00.5 PIC [0800]: VIA Technologies, Inc. P4M890 I/O APIC Interrupt Controller [1106:5327] 00:00.6 Host bridge [0600]: VIA Technologies, Inc. P4M890 Security Device [1106:6327] 00:00.7 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [1106:7327] 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198] 00:02.0 PCI bridge [0604]: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller [1106:a327] 00:03.0 PCI bridge [0604]: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller [1106:c327] 00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 07) 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev a0) 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev a0) 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev a0) 00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev a0) 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237A PCI to ISA Bridge [1106:3337] 00:11.7 Host bridge [0600]: VIA Technologies, Inc. VT8251 Ultra VLINK Controller [1106:287e] 00:13.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237A Host Bridge [1106:337b] 00:13.1 PCI bridge [0604]: VIA Technologies, Inc. VT8237A PCI to PCI Bridge [1106:337a] 02:00.0 VGA compatible controller [0300]: nVidia Corporation G71 [GeForce 7900 GS] [10de:0292] (rev a1) 03:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) 04:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 10) 05:03.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02) 05:04.0 Multimedia audio controller [0401]: Creative Labs SB Audigy [1102:0004] (rev 04) 05:04.1 Input device controller [0980]: Creative Labs SB Audigy Game Port [1102:7003] (rev 04) 05:04.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB Audigy FireWire Port [1102:4001] (rev 04) It would be appreciated if anyone can help me out here Link to comment https://www.insanelymac.com/forum/topic/195853-iatkos-7-1057-networking-and-other-problems/ Share on other sites More sharing options...
vilpostus Posted November 4, 2009 Share Posted November 4, 2009 Some general notes: DO NOT install any VGA/Sound/LAN/WLAN drivers upon installation. Install them later on working system. Geforce 7900GS - try ether ATI_init or CoreVidia (both working perfectly, but I prefer CoreVidia). be sure to uninstall any previously installed VGA driver and/or EFI strings. Managed to Get system booting without iATKOS DVD and rd=disk0s2 - install a boot loader (EFIv8-v10, Chameleon) Belkin - http://www.insanelymac.com/forum/lofiversi...hp/t106672.html Got my Ethernet Working - don't get it you have "i disabled ethernet in BIOS" bit confusing... About install option: see the above why installing azalia sound if you have SoundBlaster working? Link to comment https://www.insanelymac.com/forum/topic/195853-iatkos-7-1057-networking-and-other-problems/#findComment-1320097 Share on other sites More sharing options...
lacina Posted November 4, 2009 Author Share Posted November 4, 2009 Ok thanks for the reply im going to do a fresh install and try and dig into all that stuff, ive done so many reinstalls ive confused myself, at 1 point i have resolution changing working, cant remember how i did it.... Ethernet is disabled as i really only need wifi. Reinstalling now, ill post back in a a few mins Some general notes:DO NOT install any VGA/Sound/LAN/WLAN drivers upon installation. Install them later on working system. Geforce 7900GS - try ether ATI_init or CoreVidia (both working perfectly, but I prefer CoreVidia). be sure to uninstall any previously installed VGA driver and/or EFI strings. Managed to Get system booting without iATKOS DVD and rd=disk0s2 - install a boot loader (EFIv8-v10, Chameleon) Belkin - http://www.insanelymac.com/forum/lofiversi...hp/t106672.html Got my Ethernet Working - don't get it you have "i disabled ethernet in BIOS" bit confusing... About install option: see the above why installing azalia sound if you have SoundBlaster working? Ok thanks for the reply im going to do a fresh install and try and dig into all that stuff, ive done so many reinstalls ive confused myself, at 1 point i have resolution changing working, cant remember how i did it.... Ethernet is disabled as i really only need wifi. Reinstalling now, ill post back in a a few mins BTW my card is the Belkin 7001UK which funnily enough worked out of the box in kalyway 10.5.1 would it be possible for me to get networking Kexts from the kaly and put into my iATKOS 10.5.7? Link to comment https://www.insanelymac.com/forum/topic/195853-iatkos-7-1057-networking-and-other-problems/#findComment-1320105 Share on other sites More sharing options...
vilpostus Posted November 4, 2009 Share Posted November 4, 2009 BTW my card is the Belkin 7001UK which funnily enough worked out of the box in kalyway 10.5.1 would it be possible for me to get networking Kexts from the kaly and put into my iATKOS 10.5.7?Yes, in general. Link to comment https://www.insanelymac.com/forum/topic/195853-iatkos-7-1057-networking-and-other-problems/#findComment-1320143 Share on other sites More sharing options...
lacina Posted November 4, 2009 Author Share Posted November 4, 2009 ok have installed, and added rd=disk0s2 to boot.plist, rebooting now ok have installed, and added rd=disk0s2 to boot.plist, rebooting now GOt a panic, (no HPETS available) CPUs configured incorrectly\n"@sourcecache/AppleIntelCPUPowermaagement/AppleIntelCPUPowermanagement-76/plThread.c:155 debugger called panic strange i havent had that before, any ideas? Ok removed AppleIntelCPUPowerManagement, and am booting without the DVD in the drive at all, im seeing something about wl0 Btoadcom BCM4318 802.11 Wireless Controller in the bootup screen but then im getting still waiting for root device even after entering rd=disk0s2 in the chameleon boot options.... am going to try and install VIA Sata drivers, this install i have only installed COREVIDIA and JMICRON in the installer.... Link to comment https://www.insanelymac.com/forum/topic/195853-iatkos-7-1057-networking-and-other-problems/#findComment-1320163 Share on other sites More sharing options...
vilpostus Posted November 4, 2009 Share Posted November 4, 2009 JMicron SATA driver is must-have for the system. Link to comment https://www.insanelymac.com/forum/topic/195853-iatkos-7-1057-networking-and-other-problems/#findComment-1320217 Share on other sites More sharing options...
lacina Posted November 4, 2009 Author Share Posted November 4, 2009 Ok installed Via ATA and now no more waiting for root device, but getting a black screen and can just move the mouse around, im guessing that is video, im going to try and install a different Nvidia driver... Ok installed Via ATA and now no more waiting for root device, but getting a black screen and can just move the mouse around, im guessing that is video, im going to try and install a different Nvidia driver... which files do i need to remove to uninstall corevidia? Link to comment https://www.insanelymac.com/forum/topic/195853-iatkos-7-1057-networking-and-other-problems/#findComment-1320225 Share on other sites More sharing options...
vilpostus Posted November 4, 2009 Share Posted November 4, 2009 Some general notes:DO NOT install any VGA/Sound/LAN/WLAN drivers upon installation. Install them later on working system. Link to comment https://www.insanelymac.com/forum/topic/195853-iatkos-7-1057-networking-and-other-problems/#findComment-1320255 Share on other sites More sharing options...
vilpostus Posted November 5, 2009 Share Posted November 5, 2009 Ok installed Via ATA and now no more waiting for root device, but getting a black screen and can just move the mouse around, im guessing that is video, im going to try and install a different Nvidia driver... which files do i need to remove to uninstall corevidia? Find and remove CoreVidia.kext Link to comment https://www.insanelymac.com/forum/topic/195853-iatkos-7-1057-networking-and-other-problems/#findComment-1320784 Share on other sites More sharing options...
Recommended Posts