szemettelep Posted October 30, 2009 Share Posted October 30, 2009 Hi! I couldn't find anything about this mobo, does anybody know a distro or guide that would work on the MA770T-UD3P. I so wanted to go with an Intel build but i just couldn't spend double $ for the same performance so I stayed with AMD. Any osx86 info on this board is greatly appreciated. Thank You! Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/ Share on other sites More sharing options...
szemettelep Posted October 31, 2009 Author Share Posted October 31, 2009 I have tried IAtkos V7 and iDeneb 1.5.8 lite a couple of times but can't seem to boot into osx. My specs: GIGABYTE GA-MA770T-UD3P AM3 AMD 770 ATX AMD Motherboard AMD Athlon II X4 620 Propus 2.6GHz with 4gig Ram Geforce 8800GT Any ideas? Thank You! Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1315864 Share on other sites More sharing options...
vilpostus Posted October 31, 2009 Share Posted October 31, 2009 Use -v voodoo busratio=20 maxmem=2048 cpus=1 flags. Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1316065 Share on other sites More sharing options...
szemettelep Posted October 31, 2009 Author Share Posted October 31, 2009 thanks I'll try that too.... can yo post links to some kexts for this mobo? Thank You! Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1316109 Share on other sites More sharing options...
vilpostus Posted October 31, 2009 Share Posted October 31, 2009 Sorry, but you got to find them yourself. Use the forum search. Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1316148 Share on other sites More sharing options...
szemettelep Posted November 1, 2009 Author Share Posted November 1, 2009 ok. got it no problem... I was able to install ideneb 1.5.8 lite.. Got lucky all necessary kexts are included in the distrio bios is set to ahci. ideneb customization: went with the default selections and added 9.8.0 qoopz , mouselagfix ,AppleAzaliaAudio , ApplaAtiATA, Realtec8169/RTL8111 , NVKUSH for video. Everything seems to work fine so far, but more testing needed... hope it helps someone.... Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1317007 Share on other sites More sharing options...
ZeDD2006 Posted January 5, 2010 Share Posted January 5, 2010 ok. got it no problem... I was able to install ideneb 1.5.8 lite.. Got lucky all necessary kexts are included in the distrio bios is set to ahci. ideneb customization: went with the default selections and added 9.8.0 qoopz , mouselagfix ,AppleAzaliaAudio , ApplaAtiATA, Realtec8169/RTL8111 , NVKUSH for video. Everything seems to work fine so far, but more testing needed... hope it helps someone.... I can not get this thing to boot after install what so ever. It installs great after -x at the beginning. I have tried 2 different partitions (journaled, and not journaled) i have tried it with both bootloaders and neither are working. I have bios set to ahci and have tried it with just ide set. My windows partition no longer boots either which annoyed me. Specs: iDeneb v1.6 lite AHCI Enabled OSX86 HDD is set to mbr Gigabyte MA770t-UD3P Phenom II 945 8GB RAM 1333 Geforce 8800GTX If anyone has any ideas of how to get this thing to boot please let me know. Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1376957 Share on other sites More sharing options...
szemettelep Posted January 5, 2010 Author Share Posted January 5, 2010 from whatever reason cameleon boot loader never installed properly at first, so I booted with the install cd in the drive, once I was in osx i just downloaded the latest bootloader and everything worked fine. also try my config... hope it helps... Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1377185 Share on other sites More sharing options...
ZeDD2006 Posted January 5, 2010 Share Posted January 5, 2010 I used your setting and the bootloader would never come up, with v1 or v2. It would only come up after i used the voodoo kernal. but everything else is just like your config. When i do boot into osx it hangs at a blue screen and if i -v it shows no errors and then hangs at a grey screen. Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1377652 Share on other sites More sharing options...
zorz Posted January 6, 2010 Share Posted January 6, 2010 I'll try everythinh, but everything and no success Insataltion goes fine but after reboot no boot into iDeneb 1.6 distro. Set AHCI in BIOS, set cpus=1 in iDeneb, seatbelt... Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1377877 Share on other sites More sharing options...
WaPeR Posted January 18, 2010 Share Posted January 18, 2010 hace you tried with snow leopard? Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1388961 Share on other sites More sharing options...
zorz Posted January 19, 2010 Share Posted January 19, 2010 hace you tried with snow leopard? No. Imagine what are the situation with the Snow if the 10.5.x situation are bad... I am despite and i am thinking to buy an Intel i3 and GA P55 mobo... Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1389126 Share on other sites More sharing options...
WaPeR Posted January 19, 2010 Share Posted January 19, 2010 i'm trying but no success go to www.leohazard.com, i hope i will install SL in my PC Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1389527 Share on other sites More sharing options...
zorz Posted January 20, 2010 Share Posted January 20, 2010 i'm trying but no success go to www.leohazard.com, i hope i will install SL in my PC Just hope... and tell us what are you done! Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1390164 Share on other sites More sharing options...
puti Posted January 21, 2010 Share Posted January 21, 2010 After you finished the installation boot the iDeneb DVD, press F8 and enter this (without the ""): "rd=disk*disk you installed osx to*s*partition you installed osx to* busratio=20" Example: "rd=disk0s3 busratio=20" if you installed OSX on the 3. partition on disk 0. Hope this helps. Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1391543 Share on other sites More sharing options...
szemettelep Posted February 24, 2010 Author Share Posted February 24, 2010 Anybody managed to install snow leopard yet? Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1417115 Share on other sites More sharing options...
WaPeR Posted February 24, 2010 Share Posted February 24, 2010 not yet sorry Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1417152 Share on other sites More sharing options...
Toxx Posted March 15, 2010 Share Posted March 15, 2010 Hello Guys, I`ve got a problem installing iDeneb 1.6 Lite at my machine with AMD Athlon II X4 620 and a Gigabyte GA MA770T UD3P mainboard. If i boot with the options -v -x voodoo busratio=20 maxmem=2048 cpus=1 or others then it hangs up with a kernel panic which you can see at the end of this post. My drive from which I want to install osx is an ide drive because with ahci enabled the dvd wont boot in my sata drive. without ahci enabled the installer hangs up earlier. I dont know what I should do now. But i definitly want mac osx on my machine because i know its very good because i had installed it on a intel system and now i changed my hardware to amd and it wont work. By the way: sorry for my bad english. here is the picture with the kernel panic: can someone help me, please? Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1429247 Share on other sites More sharing options...
szemettelep Posted March 15, 2010 Author Share Posted March 15, 2010 http://www.insanelymac.com/forum/index.php?showtopic=212701 Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1429258 Share on other sites More sharing options...
Toxx Posted March 15, 2010 Share Posted March 15, 2010 http://www.insanelymac.com/forum/index.php?showtopic=212701 thanks but this don`t help me because I cant install any Mac Osx cause the kernel panic can you post your complete bios settings? Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1429274 Share on other sites More sharing options...
WaPeR Posted March 15, 2010 Share Posted March 15, 2010 http://www.insanelymac.com/forum/index.php?showtopic=212701 Thank you very much! I'll give a try this night and post the results. I hope I can make my Ati Radeon HD4670 works Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1429314 Share on other sites More sharing options...
zorz Posted March 16, 2010 Share Posted March 16, 2010 Hello Guys, I`ve got a problem installing iDeneb 1.6 Lite at my machine with AMD Athlon II X4 620 and a Gigabyte GA MA770T UD3P mainboard. If i boot with the options -v -x voodoo busratio=20 maxmem=2048 cpus=1 or others then it hangs up with a kernel panic which you can see at the end of this post. My drive from which I want to install osx is an ide drive because with ahci enabled the dvd wont boot in my sata drive. without ahci enabled the installer hangs up earlier. I dont know what I should do now. But i definitly want mac osx on my machine because i know its very good because i had installed it on a intel system and now i changed my hardware to amd and it wont work. By the way: sorry for my bad english. here is the picture with the kernel panic: can someone help me, please? Don't you try with AMD. I had the same combination as you and couldn't do anything for couple of months. When i sell off AMD and bought Intel (P55) all my nightmares gone.Now i am using iPC 10.5.6 with 10.5.8 update and i am preparing to install Snow Leopard . Buy the way, you have Kernel panic caused by unrecognized AHCI contoller . Sell AMD and buy some cheap Intel as msi P43-C51 and E6300 with your DDR3 and enjoy in all charms of Mac! (this msi and e6300 are the cheapest solution for me!) Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1429521 Share on other sites More sharing options...
Toxx Posted March 22, 2010 Share Posted March 22, 2010 Don't you try with AMD. I had the same combination as you and couldn't do anything for couple of months. When i sell off AMD and bought Intel (P55) all my nightmares gone.Now i am using iPC 10.5.6 with 10.5.8 update and i am preparing to install Snow Leopard .Buy the way, you have Kernel panic caused by unrecognized AHCI contoller . Sell AMD and buy some cheap Intel as msi P43-C51 and E6300 with your DDR3 and enjoy in all charms of Mac! (this msi and e6300 are the cheapest solution for me!) thanks for the infos but how can i fix the ahci problem? Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1433059 Share on other sites More sharing options...
zorz Posted March 23, 2010 Share Posted March 23, 2010 thanks for the infos but how can i fix the ahci problem? By no possibility. Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1433255 Share on other sites More sharing options...
Toxx Posted March 23, 2010 Share Posted March 23, 2010 By no possibility. hm and why it works for the thread starter? Link to comment https://www.insanelymac.com/forum/topic/194934-leopard-on-gigabyte-ma770t-ud3p/#findComment-1433444 Share on other sites More sharing options...
Recommended Posts