Arthur Pwnzerelli Posted July 17, 2009 Share Posted July 17, 2009 Hi im having trouble getting iATKOS v7 to start after i comlete the installation. I ran a verbose boot and the last couple of lines said. unable to mount /dev/dlsk0s1 (status code 0x00000047) and CoreRAIDServer [43]:17155 not responding. the drive that it says it's unable to mount is not even the drive i have mac os installed on so im not sure why this is even an issue. Also my computer is a p4 2.5ghz with 1gig of ram and the only option I changed in customize is the kernel version (the .7 version not the .5). Also when i attempt a normal boot it goes to the grey screen with the circular lines and about 5 seconds later a circle with a diagonal line through it appears in the center of the screen. Link to comment https://www.insanelymac.com/forum/topic/175253-iatkos-v7-will-not-startup-after-installation/ Share on other sites More sharing options...
tanbk168 Posted July 17, 2009 Share Posted July 17, 2009 the only time I had this problem is when my harddisk which is IDE is not labelled correctly, that is it is a master drive and I have put the jumper on it for slave drive. If it is SATA, I'm not sure. I will be helpful if you put down your system specs and the options you select in the customization. I have installed many times using iATKOS and everytime it works... Link to comment https://www.insanelymac.com/forum/topic/175253-iatkos-v7-will-not-startup-after-installation/#findComment-1202448 Share on other sites More sharing options...
Arthur Pwnzerelli Posted July 17, 2009 Author Share Posted July 17, 2009 They are ide drives and i think they are on cable select so i put the master cable going to cd rom and the drive i am installing mac os x on. Windows is showing up as my primary slave drive. Mac OS X is my secondary master. I select the option generic ide driver in cusomization and that has gotten rid of the circle with the diagonal line through it but now it just loads endlessly.The only other option i select in customization is the kernal (the .7 not the .5 one). System Specs processor: p4 2.5ghz ram: 1gig motherboard: Msi 845E Max motherboard Link to comment https://www.insanelymac.com/forum/topic/175253-iatkos-v7-will-not-startup-after-installation/#findComment-1202510 Share on other sites More sharing options...
Recommended Posts