Jump to content

Problem in IDE DVD drive


6 posts in this topic

Recommended Posts

Hi,

 

I just brought a new motherboard and a new 160GB sata HDD.....and sell the old 80 GB IDE HDD....but the problem is after installing the MAC[ideneb v1.4] my Sony IDE DVD-RW show every CD, DVD, DVD-DL as Blank.... Plz HELP

 

My Spec are

 

Motherboard --- Asus M2N68-AM [Working Perfect]

Processor --- AMD Anthlon X2 6000 3.0GHz [Dual Core] [Working Perfect]

Graphics Card--- NVidia XFX 9400 GT [Working Perfect]

RAM --- 3GB DDR2 800 Mhz [Working Perfect]

Optical Drive --- Sony Internal IDE DVD-RW [Not Working]

HDD --- WD 160 GB SATA [Working Perfect]

Ethernet --- Nforce 630 [Working Perfect]

Sound --- USB Sound CARD [Working Perfect]

Link to comment
Share on other sites

See slashack's AppleViaATA over 4 Gb...'s sticky thread, in the last page there a test AppleNforceATA kext you can try but you need to find out the device id of the IDE controller on your board first, using lspci -nn command from PCI Utils, you can install it from OSX86 Tools.

Link to comment
Share on other sites

i know that IDE devices are harder to get it work on osx86.

i have also 2 IDE harddrivers for Data in my Pc and i also cant get them working in osx86

 

you must buy a Sata DVD Driver or burner what ever you like, but it must be Sata !!!!

Link to comment
Share on other sites

  • 2 weeks later...
Hi,

 

I just brought a new motherboard and a new 160GB sata HDD.....and sell the old 80 GB IDE HDD....but the problem is after installing the MAC[ideneb v1.4] my Sony IDE DVD-RW show every CD, DVD, DVD-DL as Blank.... Plz HELP

 

My Spec are

 

Motherboard --- Asus M2N68-AM [Working Perfect]

Processor --- AMD Anthlon X2 6000 3.0GHz [Dual Core] [Working Perfect]

Graphics Card--- NVidia XFX 9400 GT [Working Perfect]

RAM --- 3GB DDR2 800 Mhz [Working Perfect]

Optical Drive --- Sony Internal IDE DVD-RW [Not Working]

HDD --- WD 160 GB SATA [Working Perfect]

Ethernet --- Nforce 630 [Working Perfect]

Sound --- USB Sound CARD [Working Perfect]

If I may kindly ask, what distro did you use to make your motherboard install correctly and what chipset drivers did you install? I am having a hard time installing iPC for that motherboard. I am getting this message:

panic(cpu 0 caller 0x001A49CB): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:

CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00e46000, CR4: 0x000006e0

EAX: 0x041e3501, EBX: 0x00000001, ECX: 0x00000000, EDX: 0x03aa0100

CR2: 0x00000000, EBP: 0x252fbf88, ESI: 0x00000000, EDI: 0x3aa7e1d

EFL: 0x00010206, EIP: 0x0472b67f, CS: 0x00000008, DS: 0x03970010

 

Backtrace, Format - Frame : Return Address (4 potential args on stack)

0x252fbd58 : 0x128d0d (0x3cc65c 0x?52fbd7c 0x131f95 0x0)

0x252fbd98 : 0x1a49cb (0x3d2a94 0x0 0xe 0x3d22b8)

0x252fbea8 : 0x19b3a4 (0x252fbec0 0x0 0x252fbee8 0x38d1c0)

0x252fbf88 : 0x39a877 (0x3aa5400 0x3e25140 0x8000 0xf0b)

0x252fbfc8 : 0x19b21c (0x3aa7e00 0x0 0x19e0b5 0x3973e84) Backtrace terminated-invalid frame pointer 0x0

 

Kernel version:

Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386

 

I am also getting an AppleUSBOHCI OHCI controller will be unloaded error.

 

Any suggestions would be greatly appreciated.

Link to comment
Share on other sites

same problem overhere

 

i have this XxX_x86_10.5.6_Install_Disc_Universal_Final.v2 installed and everything works fine...., but i don't see my optical drive ...LG IDE -DVD-RW.

 

And i have some sound problems ( i have a E-MU 0404 USB.... and some times makes some wierd sounds and i need too restart'it) if i watch a HD movie on mac the sound behave strange .....and very ugly.

"i have install the original drivers from de CD and i try the drivers from de manufacturer site... and it's the same problem......the sound crackles..or something like that !!!

 

Please HELLLLLLPPPPP !!!!

 

p.s : sorry for my english

 

thanks all of you !!!

 

Link to comment
Share on other sites

  • 3 months later...
 Share

×
×
  • Create New...