Jump to content

Toshiba X200 - Pas de Son !


_Z3r0_
 Share

3 posts in this topic

Recommended Posts

:) Bonjour à tous !!!

Je suis nouveau ici, mais j'y ai déjà appris pas mal de choses (et j'espère en apprendre encore plus ^^).

 

Voilà j'expose mon problème: j'essaye de mettre OS X sur mon portable (un Toshiba X200-20F), mais je me bute a quelques problemes:

-Pas de bluetooth (je ne m'en suis pas occupé, mais j'y crois pas trop)

-Pas de gestion de la luminosité de l'écran

-Pas de son!!! :D

 

Alors pour les 2 premiers problemes c'est juste si quelqu'un a une idée...

 

Je voudrais que ce topic porte sur le problème de son, sachant que j'ai déjà essayé pas mal de drivers sous iATKOS 5 et iPC 10.5.6 Final

Mon Codec audio est intégré au chipset intel (centrino) et est un ALC268.

 

la dénomination sous lspci donne:

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)

 

Voilà, j'ai essayé de chercher avant de poster ici, mais apparemment je ne suis pas le 1er possesseur de X200 a buter sur un ALC268, bien que plusieurs drivers existent..

 

Je m'en remet donc à vous :)

:P Merci!

Link to comment
Share on other sites

Bon pas d'idée, aidez moi please :)

J'ai essayé AppleHDAPatcher 1.20 de Taruga, avec un Dump crée sous KUbuntu Intrepid

Voila mon Dump:

Codec: Realtek ALC268
Address: 0
Vendor Id: 0x10ec0268
Subsystem Id: 0x1179ff0a
Revision Id: 0x100003
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0
 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0
 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0
 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
 Amp-Out vals:  [0x28 0x28]
 Converter: stream=0, channel=0
 PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
 Amp-Out vals:  [0x21 0x21]
 Converter: stream=0, channel=0
 PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
 Converter: stream=0, channel=0
 Digital:
 Digital category: 0x0
 PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Node 0x07 [Audio Input] wcaps 0x100111: Stereo
 Converter: stream=0, channel=0
 SDI-Select: 0
 PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
 Connection: 1
 0x24
Node 0x08 [Audio Input] wcaps 0x100111: Stereo
 Converter: stream=0, channel=0
 SDI-Select: 0
 PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
 Connection: 1
 0x23
Node 0x09 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0d [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0e [Audio Mixer] wcaps 0x20010a: Mono Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x00]
 Connection: 1
 0x02
Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x00 0x00] [0x00 0x00]
 Connection: 2
 0x02 0x1d
Node 0x10 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x80 0x80]
 Connection: 3
 0x03 0x1d 0x02
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
 Pincap 0x0820: IN
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
 Pin-ctls: 0x00:
Node 0x13 [Pin Complex] wcaps 0x400001: Stereo
 Pincap 0x0820: IN
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
 Pin-ctls: 0x00:
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x00 0x00]
 Pincap 0x081003c: IN OUT HP EAPD Detect
 EAPD 0x2: EAPD
 Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
 Pin-ctls: 0x40: OUT
 Unsolicited: tag=00, enabled=0
 Connection: 1
 0x0f
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x00 0x00]
 Pincap 0x081003c: IN OUT HP EAPD Detect
 EAPD 0x2: EAPD
 Pin Default 0x0221101f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
 Pin-ctls: 0xc0: OUT HP
 Unsolicited: tag=04, enabled=1
 Connection: 1
 0x10
Node 0x16 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80]
 Pincap 0x0810: OUT
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
 Pin-ctls: 0x00:
 Connection: 1
 0x0e
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
 Amp-In vals:  [0x00 0x00]
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80 0x80]
 Pincap 0x083734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
 Pin Default 0x02a11830: [Jack] Mic at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0x3, Sequence = 0x0
 Pin-ctls: 0x24: IN VREF_80
 Unsolicited: tag=00, enabled=0
 Connection: 1
 0x02
Node 0x19 [Pin Complex] wcaps 0x40008b: Stereo Amp-In
 Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
 Amp-In vals:  [0x00 0x00]
 Pincap 0x083724: IN Detect
Vref caps: HIZ 50 GRD 80 100
 Pin Default 0x99a30931: [Fixed] Mic at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x3, Sequence = 0x1
Misc = NO_PRESENCE
 Pin-ctls: 0x24: IN VREF_80
 Unsolicited: tag=00, enabled=0
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
 Amp-In vals:  [0x00 0x00]
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80 0x80]
 Pincap 0x083734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
 Pin Default 0x0281103e: [Jack] Line In at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0x3, Sequence = 0xe
 Pin-ctls: 0x24: IN VREF_80
 Unsolicited: tag=00, enabled=0
 Connection: 1
 0x02
Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
 Pincap 0x0820: IN
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
 Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
 Pincap 0x0820: IN
 Pin Default 0x4016852d: [N/A] Speaker at Ext N/A
Conn = Digital, Color = Purple
DefAssociation = 0x2, Sequence = 0xd
Misc = NO_PRESENCE
 Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400380: Mono Digital
 Pincap 0x0810: OUT
 Pin Default 0x02451120: [Jack] SPDIF Out at Ext Front
Conn = Optical, Color = Black
DefAssociation = 0x2, Sequence = 0x0
Misc = NO_PRESENCE
 Pin-ctls: 0x40: OUT
 Unsolicited: tag=00, enabled=0
 Connection: 1
 0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
 Processing caps: benign=0, ncoeff=10
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x23 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x01 0x01]
 Connection: 7
 0x18 0x19* 0x1a 0x1c 0x14 0x15 0x12
Node 0x24 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-Out vals:  [0x01 0x01]
 Connection: 7
 0x18 0x19* 0x1a 0x1c 0x14 0x15 0x13

 

Et voila le rendu du patcher:

		  AppleHDA Patcher - 2006/2007 by Taruga v1.20			


* Patching AppleHDA.kext to 0x10ec0268				Done
* Checking AppleHDA for patch						Done
0001f4a0	cmpl	$0x10ec0885,%eax
0001f4a7	cmpl	$0x10ec0268,%eax
00020584	cmpl	$0x10ec0885,%eax
0002058b	cmpl	$0x10ec0268,%eax
* Checking for SPDIF Out						   		Detected
* Checking for SPDIF In							  Not Detected
* Using the following nodes in pathmap

Speaker  : 

* Copying new config to destination					Done
* Repairing Permissions								Done
* Deleting Extensions Cache								Done

** Done patching - You can reboot now **

 

Seulement, au reboot, pas d'entrée, pas de sortie, bref pas de son... :)

J'aimerais vraiment rester sous OS X, il ma manque plus que le son, je ne sais plus quoi faire...

Link to comment
Share on other sites

 Share

×
×
  • Create New...