dissonanz Posted February 9, 2009 Share Posted February 9, 2009 Hallo an alle! Ich habe eine CD mit boot-123 und die Retail DVD. Booten klappt problemlos. Danach lege ich die Retail ein und bestätige das Starten von der DVD mit Enter. Danach erscheint der weiße Bildschirm mit dem Apple-Logo in der mitte und kurze Zeit später (etwa 2-3 Sekunden) startet mein Notebook neu. Hier ist meine Hardware: Intel Pentium Dual-Core Prozessor T3200 2,0 GHz 667 MHz FSB 1 MB Cache Chipset: Intel PM45 + ICH9M Memory: PC2-6400 (800 MHz), DDR2 SODIMM (3072 MB (1 x 1024 MB , 1 x 2048 MB)) Display: 15,4 WXGA SuperBright LCD-Display, resolution: 1280 x 800 Pixel Graphic: NVIDIA GeForce 9200M GS, 512 MB GDDR2 memory HD: 320 GB SATA DVD: Super Multi Dual Layer Lan: 100/1000 Ethernet UTP, Wlan: Atheros 802.11b/g Audio: Intel HD Audio Codec, REALTEK ALC262-VC2-GR Würde mich freuen, wenn mir jemand helfen könnte! Link to comment https://www.insanelymac.com/forum/topic/152160-broblem-beim-booten-der-retail-dvd/ Share on other sites More sharing options...
pontifex22 Posted February 9, 2009 Share Posted February 9, 2009 -v Link to comment https://www.insanelymac.com/forum/topic/152160-broblem-beim-booten-der-retail-dvd/#findComment-1074861 Share on other sites More sharing options...
dissonanz Posted February 9, 2009 Author Share Posted February 9, 2009 -v Wo genau muss das eingegeben werden? Ich boote ja von der DVD und nicht mit dem normalen Darwin loader. Link to comment https://www.insanelymac.com/forum/topic/152160-broblem-beim-booten-der-retail-dvd/#findComment-1074891 Share on other sites More sharing options...
pontifex22 Posted February 9, 2009 Share Posted February 9, 2009 Retail einlegen, warten bis Laufwerk bereit, Return, Retail fährt an, F8, -v. Link to comment https://www.insanelymac.com/forum/topic/152160-broblem-beim-booten-der-retail-dvd/#findComment-1074941 Share on other sites More sharing options...
dissonanz Posted February 9, 2009 Author Share Posted February 9, 2009 Retail einlegen, warten bis Laufwerk bereit, Return, Retail fährt an, F8, -v. ... Ladevorgang ... Attempting to determine CPU Multiplier. If System reboots, RDMSR 198h causes a fault. Determined CPU:FSB multiplier to be 12 Measuring TSC frequency (e.g. CPU speed) CPU runs at 1995.044800 MHz BUS must therefore run at 166.253733 MHz ... und jetzt folgt der Neustart. Link to comment https://www.insanelymac.com/forum/topic/152160-broblem-beim-booten-der-retail-dvd/#findComment-1074955 Share on other sites More sharing options...
dissonanz Posted February 9, 2009 Author Share Posted February 9, 2009 Ich habe nun eine Partition erstellt, auf die ich die Retail DVD übertragen habe und starte von dieser. Er erscheint der weiße Bildschirm und das Apple Logo. Paar Sekunden später startet das System neu. Beim Booten mit -v erscheint folgendes: Loading Darwin/x86 Loading kernel mach_kernel Loading HFS+file: [mach_kernel] from 42346f0. Loading HFS+file: [mach_kernel] from 42346f0. LoadDrivers: Loading from [Extra/Extensions] LoadDrivers: Loading from [/System/Library/Extensions.mkext] Loading HFS+ file: [/System/Library/Extensions.mkext] from 42346f0. Loading HFS+ file: [/System/Library/Extensions.mkext] from 42346f0. Was könnte nun das Problem sein? Link to comment https://www.insanelymac.com/forum/topic/152160-broblem-beim-booten-der-retail-dvd/#findComment-1075361 Share on other sites More sharing options...
mrpink86 Posted February 10, 2009 Share Posted February 10, 2009 Ich habe nun eine Partition erstellt, auf die ich die Retail DVD übertragen habe und starte von dieser.Er erscheint der weiße Bildschirm und das Apple Logo. Paar Sekunden später startet das System neu. Beim Booten mit -v erscheint folgendes: Loading Darwin/x86 Loading kernel mach_kernel Loading HFS+file: [mach_kernel] from 42346f0. Loading HFS+file: [mach_kernel] from 42346f0. LoadDrivers: Loading from [Extra/Extensions] LoadDrivers: Loading from [/System/Library/Extensions.mkext] Loading HFS+ file: [/System/Library/Extensions.mkext] from 42346f0. Loading HFS+ file: [/System/Library/Extensions.mkext] from 42346f0. Was könnte nun das Problem sein? probier mal "cpus=1 -v" Link to comment https://www.insanelymac.com/forum/topic/152160-broblem-beim-booten-der-retail-dvd/#findComment-1075904 Share on other sites More sharing options...
dissonanz Posted February 10, 2009 Author Share Posted February 10, 2009 Es mussten lediglich folgende Einstellungen in Bios vorgenommen werden: ACPI - Enable Execute Disable - Enable Habe nun erfolgreich installiert. Beim Ausschalten erhalte ich eine Kernel Panic. Was könnte das sein? Link to comment https://www.insanelymac.com/forum/topic/152160-broblem-beim-booten-der-retail-dvd/#findComment-1076245 Share on other sites More sharing options...
Recommended Posts