super_engine Posted January 29, 2009 Share Posted January 29, 2009 Test it Sincerely i'm not sure if X1100 is the same of X1300-X1400 family Install the kext attached with kexthelper and reboot with -v -f flags This kext can enable CI/QE but the control of resolution depends by the system configuration. If you don't have display resolution switch you can use, at the boot, the flag "Graphics Mode"="XresxYresxColorbits" (i.e "Graphics Mode"="1280x800x32") Good Luck ATIRadeonX1000.kext.zip Link to comment https://www.insanelymac.com/forum/topic/150089-atiradeonx1000kext-for-id-5975/ Share on other sites More sharing options...
Harry84 Posted January 30, 2009 Share Posted January 30, 2009 Install your kext and gray window with 4 languages reboot with -v -f and kernel panic. - There are many words (how and where can I find it to send you, in what log (or another) file?) I delete this kext from Windows and Leopard works again. Link to comment https://www.insanelymac.com/forum/topic/150089-atiradeonx1000kext-for-id-5975/#findComment-1062349 Share on other sites More sharing options...
Daniel G Posted February 3, 2009 Share Posted February 3, 2009 Hi i used your kext i have a IPC Mac OS X 10.5.6: Laptop FUJITSU SIEMENS Amilo Pa 1510 AMD Turion 64X 1.6Gx2 120G Realtek ALC861 @ ATI SB450 ATI Radeon XPress 1100 0x5975 i'll write you the output: Display: Type: Display Bus: PCI VRAM (Total): 128 MB Vendor: ATI (0x1002) Device ID: 0x5975 Revision ID: 0x0000 Kernel Extension Info: No Kext Loaded Displays: Display: Resolution: 1024 x 768 Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported the bottom bar is transparent i see now VRAM (Total): 128 MB which is far good i did not manage to to that with others kext, but for QE/CI hardware acceleration i do not know what to put,maybe now to try calistro 3.If you havew any ideea. Daniel Test itSincerely i'm not sure if X1100 is the same of X1300-X1400 family Install the kext attached with kexthelper and reboot with -v -f flags This kext can enable CI/QE but the control of resolution depends by the system configuration. If you don't have display resolution switch you can use, at the boot, the flag "Graphics Mode"="XresxYresxColorbits" (i.e "Graphics Mode"="1280x800x32") Good Luck Link to comment https://www.insanelymac.com/forum/topic/150089-atiradeonx1000kext-for-id-5975/#findComment-1067330 Share on other sites More sharing options...
Krazubu Posted February 3, 2009 Share Posted February 3, 2009 Closed Support is not possible on those chips, not because of the GPU but because of the shared memory. The problem is not related to device ID. If you want support, write a GART driver. Or find the hidden feature that might already be in the current kexts and just waits for some strings to be injected. Link to comment https://www.insanelymac.com/forum/topic/150089-atiradeonx1000kext-for-id-5975/#findComment-1067340 Share on other sites More sharing options...
Recommended Posts