Vega16 Posted January 14, 2009 Share Posted January 14, 2009 I have tried 9 times on diff ideneb installs and had no success at all. My mobo is a A8M2N-LA (NodusM3). Can someone please recommend an install whether it is iakto,ideneb,kalway,zephyroth, or anything else out there. Here are my full specs Motherboard description Motherboard manufacturer's name: ASUS A8M2N-LA HP/Compaq name: NodusM3-GL8E CPU/Processor Socket: AM2 Supports AMD Athlon 64, Athlon 64 X2, and Sempron processors Front-side bus (FSB) 2000 MegaTransfers/second Chipset GeForce 6150 LE chipset BIOS features Award brand system BIOS Keyboard combination to used to enter BIOS: F1 Form factor Micro-ATX: 9.6 in X 9.6 in Memory Four 240-pin DDR2 DIMM sockets Supports PC 4200 (533 MHz) and PC2 5300 (667 MHz) DDR2 DIMMs non-ECC memory only, unbuffered Maximum HP/Compaq approved memory is 4 GB* NOTE: *Actual available memory may be less Expansion slots Three PCI One PCI Express x16 graphics Video graphics Integrated Serial ATA 4 SATA connectors Each connector supports 1 serial ATA-150 disk drive Onboard audio Built-in High Definition 8 channel audio ALC888 CODEC Onboard LAN 10/100 Marvell 88EC031 Back panel I/0 Listed in physical order from left to right: One PS/2 keyboard port (purple) One PS/2 mouse port (green) One SPDIF (coaxial) out One VGA port One IEEE 1394 Four USB 2.0 One RJ-45 networking port Audio ports: side speaker out (gray) rear speaker out (black) center/subwoofer (yellow orange) line in (light blue) line out (lime) microphone (pink) Internal connectors One 24-pin ATX power connector One 4-pin ATX power connector Two PATA connectors Four SATA connectors One floppy drive connector Two 12v fan connectors for CPU fan and PC fan One 9-pin header for power button, reset button, power LED, and HDD LED One audio header for headphone-out and microphone-in One audio header for line input Two USB 2.0 connectors supporting 4 additional USB 2.0 ports One IEEE 1394 connector Link to comment https://www.insanelymac.com/forum/topic/146762-installing-leopard-on-a-hp-m7664x-with-a-a8m2n-la-motherboard/ Share on other sites More sharing options...
marcohujaychou Posted September 1, 2009 Share Posted September 1, 2009 I have tried 9 times on diff ideneb installs and had no success at all. My mobo is a A8M2N-LA (NodusM3). Can someone please recommend an install whether it is iakto,ideneb,kalway,zephyroth, or anything else out there. Here are my full specs Motherboard description Motherboard manufacturer's name: ASUS A8M2N-LA HP/Compaq name: NodusM3-GL8E CPU/Processor Socket: AM2 Supports AMD Athlon 64, Athlon 64 X2, and Sempron processors Front-side bus (FSB) 2000 MegaTransfers/second Chipset GeForce 6150 LE chipset BIOS features Award brand system BIOS Keyboard combination to used to enter BIOS: F1 Form factor Micro-ATX: 9.6 in X 9.6 in Memory Four 240-pin DDR2 DIMM sockets Supports PC 4200 (533 MHz) and PC2 5300 (667 MHz) DDR2 DIMMs non-ECC memory only, unbuffered Maximum HP/Compaq approved memory is 4 GB* NOTE: *Actual available memory may be less Expansion slots Three PCI One PCI Express x16 graphics Video graphics Integrated Serial ATA 4 SATA connectors Each connector supports 1 serial ATA-150 disk drive Onboard audio Built-in High Definition 8 channel audio ALC888 CODEC Onboard LAN 10/100 Marvell 88EC031 Back panel I/0 Listed in physical order from left to right: One PS/2 keyboard port (purple) One PS/2 mouse port (green) One SPDIF (coaxial) out One VGA port One IEEE 1394 Four USB 2.0 One RJ-45 networking port Audio ports: side speaker out (gray) rear speaker out (black) center/subwoofer (yellow orange) line in (light blue) line out (lime) microphone (pink) Internal connectors One 24-pin ATX power connector One 4-pin ATX power connector Two PATA connectors Four SATA connectors One floppy drive connector Two 12v fan connectors for CPU fan and PC fan One 9-pin header for power button, reset button, power LED, and HDD LED One audio header for headphone-out and microphone-in One audio header for line input Two USB 2.0 connectors supporting 4 additional USB 2.0 ports One IEEE 1394 connector hi try leo4all v4.1 WORK GREAT Link to comment https://www.insanelymac.com/forum/topic/146762-installing-leopard-on-a-hp-m7664x-with-a-a8m2n-la-motherboard/#findComment-1246174 Share on other sites More sharing options...
Recommended Posts