jpschoute Posted December 2, 2008 Share Posted December 2, 2008 Hi all, been away a while but now i'm back. i have 1 imac and 2 macbooks at home (one macbook from work), what i want to do is create a leopard server for my homenetwork. This is pure for testing and playing around with it. I Tried Jas, installation went perfect, after install the pc went into a constant reboot loop. After reading on the wonderfull forum here i checked StageXNU and the pc started into the apple with the spinning wheel i thought. But no, after about a minute i got an icon between the apple and spinning wheel with a circle and a line through it. Went in the forum's again... something to do with my HD. Checked it, made sure it was the only ide-device connected. No success. Then i used a different ide HD, reinstalled it again NO succes. Started with -v option gave me: "still waiting for root device" I don't know what to do next. I don't even know if my hardware can run OSX86 but i hope so. Any suggestions ? Hardware specs: Processor Type: Intel Pentium 4 2.4 GHz Cache memory Type: L2 Cache Installed Size: 512 KB Cache Per Processor: 512 KB Chipset Type: Intel 845GE Data Bus Speed: 533 MHz Type: 1 x IDE - integrated - PCI Controller Interface Type: ATA-100 Optical storage Type: CD-ROM - IDE Graphics controller Type: AGP 4x - integrated Graphics Processor / Vendor: Intel Extreme Graphics Video Memory: Shared Video Memory (UMA) Link to comment https://www.insanelymac.com/forum/topic/139143-jas-1054-server-install-on-hp-d230/ Share on other sites More sharing options...
jpschoute Posted December 2, 2008 Author Share Posted December 2, 2008 nobody Link to comment https://www.insanelymac.com/forum/topic/139143-jas-1054-server-install-on-hp-d230/#findComment-985263 Share on other sites More sharing options...
Recommended Posts