edu10106 Posted November 29, 2008 Share Posted November 29, 2008 OSX86 is a collaborative hacking project to run the Mac OS X computer operating system on non-Apple personal computers with x86 architecture processors. This upload includes iATKOS 5i DVD iso image and md5 rtf file. iATKOS 5i DVD: Leopard 10.5.5 Build 9F33 OSX86 installer DVD for Intel CPU X86 computers. The oscar goes to Apple and OSX86 community.. Attention: 1- This DVD is designed for Intel architectures. Minimum requirements: Intel SSE2 CPU, 512MB RAM, 10GB free space on target partition, OpenGL VGA card. Recommended: Intel Core CPU, 1GB RAM, 15GB free space on target partition, nVidia 6xxx or newer - ATI X1300 or newer - Intel GMA950 or X3100 VGA card. 2- This DVD includes Apple's Mac OS X Leopard 10.5.5 (9F33) installation. 3- Make sure that the md5 checksum of your iATKOS iso image matches the one posted on our website or the one in md5.rtf file. Otherwise you may have a faulty DVD image. Use quality media/burner and burn slowly. Information: - This OSX86 installation DVD release supports both GPT and MBR partitioned harddrives. - The major improvement on this 5i release is updating your running system using software updater just like real Macs. This is possible for Intel based chipsets. Please read the information about preparing an upgradable system. - Main system is fully stock! That means it can't run on x86 hardware without selecting none of x86 patches. At least you need to choose one of the decrypters. cheers osx86.Türk team Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/ Share on other sites More sharing options...
pere Posted November 29, 2008 Share Posted November 29, 2008 Y lleva DSDT patcher de serie... Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-982083 Share on other sites More sharing options...
edu10106 Posted November 29, 2008 Author Share Posted November 29, 2008 dal sito di uphuck: THE README!! !!! READ CAREFULLY AND TAKE NOTES IF NEEDED !!! Welcome to iATKOS v5i Installation.. The oscar goes to Apple and OSX86 community.. Thanks to Netkas and the chameleon team for the bootloader.. Thanks to fassl, superhai and mackerintel for their dsdt work.. Special thanks to pere and fassl for their supports on this work of mine.. And zapf2000, thank you buddy, for all of your supports cheers to ggrn.de people.. For my brother eskurza.. uphuck Attention: 1- This DVD is designed for Intel architectures. Minimum requirements: Intel SSE2 CPU, 512MB RAM, 10GB free space on target partition, OpenGL VGA card. Recommended: Intel Core CPU, 1GB RAM, 15GB free space on target partition, nVidia 6xxx or newer - ATI X1300 or newer - Intel GMA950 or X3100 VGA card. 2- This DVD includes Apple's Mac OS X Leopard 10.5.5 (9F33) installation. 3- Make sure that the md5 checksum of your iATKOS iso image matches the one posted on our website. Otherwise you may have a faulty DVD image. Use quality media/burner and burn slowly. Information: - This OSX86 installation DVD release supports both GPT and MBR partitioned harddrives. - The major improvement on this 5i release is updating your running system using software updater just like real Macs. This is possible for Intel based chipsets. Please read the information about preparing an upgradable system below. - Main system is fully stock! That means it can't run on x86 hardware without selecting none of x86 patches. At least you need to choose one of the decrypters. Installation: 1- Run Disk Utility via Utilities menu and erase the target partition for clean install. Do partitioning if you need to. a- You can choose MBR (Master Boot Record) or GPT (Guid Partition Table) via partitioning options. If you want to change your existing partition table type, note that all your existing data on disk will be gone. b- For Windows fellows that has not tested this amazing system yet and that does not want to loose their windows software, porn and virus&trojan archive on D:\, should use Parted Magic Live CD for preparing an active primary target partition and after that, just erase it via diskutil. Jump to Step 2. 2- Select the destination for installation. 3- Click Customize*** and select what you need. 4- Click Install. Install time is about 20 minutes. *** Customize section is the most important part of the installation for you to make OS X work on your hardware. Customize: - iATKOS Main system: If you want to install the osx86 main system, you need to select this. - Bootloader: You have 2 choices. You must select one of them for booting your osx86 system. PC_EFI V9 is an "all in one" bootloader and has many options. The most important ones are DSDT override, external kexts and the 64bit mode (snow leo only). DSDT override will be needed for the upcoming updates, otherwise osx86 systems will have kernel panic due to new RTC driver. "External kexts" option allows users to use external location for their special drivers (/Extra/Extensions), this will protect them from the updates. iATKOS v5i installation has all the needed scripts and packages for you to prepare an upgradable system and update like real Macs, but you need to read the information about preparing an upgradable system below. The other choice is Chameleon v1.0.11. This is compatible for most systems, users whom want to have a normal old-style osx86 system may choose this bootloader. - Decrypters: You must select one of the decrypters for your x86 hardware. - SMBIOS: You need to select one of the enablers or classic x86 SMBIOS drivers. Enablers allow your system to run on stock SMBIOS driver and this is also a must for upgradable systems. x86 patched SMBIOS' are for normal old style osx86 systems. - Kernel: You can choose 9.5.0 voodoo, 9.5.0 fassl kernel or old 9.2.0 toh kernel which is compatible for most. For upgradable systems, the custom kernel you selected will be protected after applying the update, which means you will be running on new System.kext + your old 9.x.0 custom kernel which is not right. System must run on System.kext that belongs to your kernel version. So, you will need to replace new System.kext with your old System.kext, otherwise you will not able to use none of USB devices. You can find your custom kernel's System.kext under /Library/Temp. New updated one is in /System/Library/Extensions folder. Do not forget to repair the disk permissions using Disk Utility. If you want to switch to stock kernel when running upgradable system, then you need to edit com.apple.Boot.plist file under /Library/Preferences/SystemConfiguration. You need to change the value ''custom'' to ''mach_kernel'' and reboot. Don't forget to use the same System.kext version with your running kernel. For normal iATKOS osx86 systems you need to check /Library/Backups folder for the stock kernel and replace it with the existing kernel on your root. - ACPI: Main system includes stock ACPI driver. You can choose modified ACPI for shutdown/reboot problems and also you can select OHR driver for such issues. You can choose x86 modified ACPI driver for PS2 mouse/keyboard and also PS2 driver can sure manage that but it is not a good choice for upgradable systems. You may need to select APIC driver for some mobo. - Disabler: This driver disables some problematic drivers, you may not need this for PC_EFI V9 systems but this can still be usefull for most systems. - Remove PowerManagement: This removes the most problematic driver. You do not need it if you select Disabler or if you are on PC_EFI V9 bootloader. - PS/2: Driver for PS/2 keyboard/mouse. You will need to modify the Info.plist of ACPIPS2Nub.kext for the update's ACPI version before applying main system update, otherwise your ps2 mouse/keboard will not work. For upgradable systems, I advice you to use x86 ACPI driver instead of this. - OHR: Driver for freeze issues on shutdown/reboot. Modified ACPI driver can be an alternative for this. - Drivers: Additional drivers for your setup. Read the descriptions. *********Preparing an Upgradable System********** A profile is given below, first four items are musts for upgradable systems, the rest are for additional setups. Read carefully. Intel chipsets have more chance for success. - Main System - PC EFI V9 Bootloader - One of the Decrypters - One of the SMBIOS Enablers - It is better to use the stock kernel. If any custom kernel is selected then you will need to replace the System.kext with the one in /Library/Temp after applying the update. - For PS2 mouse/keyboard it is better to select x86 ACPI driver instead of PS2 driver. - Speedstepping support may be problematic for upgradable systems without Disabler. But you can use it safely with Disabler. - GMA950-a will fail after update, GMA950-b or efi string should be selected for such systems. Multiboot: iATKOS 5i has no integrated procedure for multibooting but preparing a multiboot GPT or MBR system with this release is easy. Here is a ''How To'' for GPT and MBR triple boot including Mac-Win-Linux. - MBR (Master Boot Record) triple boot - - Change your partition table type to MBR (msdos type) and create 3 primary partitions by using Parted Magic Live CD or iATKOS Disk Utility. HFS+ format for OS X target, Fat32 for the others. (Note: %99.99999 of the PC harddrives already have MBR partition map scheme (msdos type) which you can change it to GPT via Parted Magic CD or iATKOS Disk Utility if you like to.) - Add boot flag to Vista or Linux target and install the OS' in any order you like. For linux, do not install bootloader to MBR, install it to linux root. If you want linux to take the boot control then you need to install its bootloader to MBR. - Boot iATKOS 5i DVD and install OS X to its target as usual. - You may need to repair Vista. Add boot flag to Vista partition, boot Vista DVD, select repair, add boot flag to OS X partition, thats all. Now you have triple boot on MBR. Note: Adding boot flag to MBR partitions: Boot Parted Magic Live CD, right click to partition, select flags and click to boot. - GPT (Guid Partition Table) triple boot - - Change your partition table type to GPT (Guid Partition Table) and create 3 partitions by using iATKOS Disk Utility. HFS+ format for OS X target, Fat32 (msdos) for the others. - Boot Windows Media and install it to its Fat32 target partition. (Note: Vista might not detect the hybrid partition table as XP does If so it will refuse to install the OS on the target. The trick is just try to format the other partition and then select your real target again for installation, you will see that it will success this time. No need to worry, it will not erase any data that time, because it cannot even detect the MBR part of the hybrid but this trick solves it.) - Boot Linux media and install the OS. If you want OS X to take the control of booting then install Linux bootloader to Linux root. If you want Linux to take the control then install it to MBR (actually the MBR of msdos part of the hybrid partition table) and you will need to change the install order also. The one which will take the boot control should be the last one to be installed. (Note: Some live linux cd stuff (knoppix, kanotix, parsix, etc.) has built-in installer applications and they use gparted for partitioning and formatting targets. At this point, formatting target to linux fs via Gparted is not a good choice because it may break the hybrid partition table, use unix fdisk just for changing the target partition type from ''c0'' to ''83'' which is linux partition type, then you can continue installation.) - Boot iATKOS 5i DVD and install OS X as usual. Now you have triple boot on GPT, thats all. Known Issues: - This dvd may not include all the necessary drivers required by your setup. Additional steps may be needed to be taken by the user to setup and use such components. Unsuccessful Installation and Related Symptoms: - System freezes at grey screen by booting from DVD. --> You probably have an unsupported chipset. *965 or newer chipset ASUS or MSI motherboard/laptop *many VIA, SIS, ATI chipset motherboards ~ start with cpus=1 -v ~ Play with BIOS settings, turn off 1 core ~ There are modified BIOS' for Intel 965 and newer ASUS/MSI motherboards ****************************************** Que opinas pere. Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-982106 Share on other sites More sharing options...
pere Posted November 29, 2008 Share Posted November 29, 2008 Que el planteamiento de Uphuck nunca a sido tener una libreria de drivers en el dvd, sino un sistema lo mas vanilla posible y los últimos avances siempre que se pueda. Por ejemplo ha estado esperando a los kernels 9.5.0 y el boot chameleon para sacar la nueva V5i, por eso no salió antes. Además ha tenido que desarrollar con fassl la implementación del sistema DSDT en la nueva versión para que así una instalación del V5i en un sistema C2D sea mas segura de actualizar a 10.5.6. Espero que lo disfruteis. Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-982112 Share on other sites More sharing options...
edu10106 Posted November 29, 2008 Author Share Posted November 29, 2008 Yo lo Estoy descargando aun pero por lo que dice Se ve bien Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-982128 Share on other sites More sharing options...
Derty Posted November 29, 2008 Share Posted November 29, 2008 veo que se la han currado lindo, a disfrutar los que aun no esten con boot 132..... y los que tenemos boot 132 a esperar por el dsdt...... archivo en la bahia drivers Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-982144 Share on other sites More sharing options...
edu10106 Posted November 29, 2008 Author Share Posted November 29, 2008 derty yo no tengo muy laro esto del dsdt lo he leido y aun no lo tengo claro, tu no lo has instalado aun? porque yo he visto en el foro italiano que como se instala en la p5w pero si uno consigue el leo snow siempre se puede instalar con el boot 132.! ose hace algo diferente Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-982284 Share on other sites More sharing options...
Derty Posted November 29, 2008 Share Posted November 29, 2008 igual, estoy esperando a ver que dice macita..... hecabe hizo arrancar el retail en una gigabyte con dsdt, esperaremos que dice. es para mejorar la compatibilidad de hardware, parece que será necesario después del 10.5.6....... Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-982372 Share on other sites More sharing options...
edu10106 Posted November 30, 2008 Author Share Posted November 30, 2008 Derty en este link esta lo que dice macita del dsdt http://forum.insanelymac.com/index.php?showtopic=136766 Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-983087 Share on other sites More sharing options...
s127 Posted December 2, 2008 Share Posted December 2, 2008 pues esperemos que con esta nueva DSDT se consiga solucionar el problemas de la ethernet, que deja de funcionar después de un sleep Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-985236 Share on other sites More sharing options...
pere Posted December 2, 2008 Share Posted December 2, 2008 Para eso tendriamos que hecharle un vistazo a tu DSDT mas detenidamente, porque no te pasas por el IRC y le hechamos un vistazo?. http://forum.insanelymac.com/index.php?showtopic=116157 Pasate primero por este hilo para preparar la info que necesitamos. http://forum.insanelymac.com/index.php?showtopic=134407 Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-985247 Share on other sites More sharing options...
ElPetao Posted December 2, 2008 Share Posted December 2, 2008 Alguien me puede decir el Canal Irc y el Servidor please? Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-985296 Share on other sites More sharing options...
pere Posted December 2, 2008 Share Posted December 2, 2008 La info está en el primer link del post anterior.... Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-985312 Share on other sites More sharing options...
-SoniC- Posted December 4, 2008 Share Posted December 4, 2008 Yo lo instale en un potatil inspiron 6000 con un centrino 2.13ghz 2gbs de ram y 100gbs de HD a 7.200rpm. Lo instale creando 3 particiones con particiones GUID, y despues de la instalacion se queda cargando en la pantalla blanca de la manzanita, y luego se reinicia una y otra vez, de ahi no pasa. Alguna sugerencia. Ayuda por favor! Salu2!! Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-987423 Share on other sites More sharing options...
pere Posted December 4, 2008 Share Posted December 4, 2008 Tu procesador es COre2DUO? Que seleccionaste en la instalacion? Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-987504 Share on other sites More sharing options...
-SoniC- Posted December 4, 2008 Share Posted December 4, 2008 No mmi procesador es un Centrino (1 solo core) normal de 2.13ghz, en la instalacion tengo que poner algo concretamente? No puedo instalar todas las cosas y luego ya utilizara la que realmente le hagan falta? Salu2!! Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-987677 Share on other sites More sharing options...
Bernardo Avila Marquez Posted December 6, 2008 Share Posted December 6, 2008 Hola a todos He descargado esta distro de Mac y he tratado de instalar en mi pc y todas las ocasiones tengo como resultado un kernel panic, sea el kernel 9.2 o el 9.5 vodooo si es lo mismo he tratato de varias maneras y nada. con la siquiente configuracion: Bootloader PC efi V9 X86 patches descryters appledescrypts Smbios_efi kernel 9.2.0 toH ACPI x86 ACPI ps/2 OHR Drivers Nvidia NVinject system Sata/ide intel sata y otras configuracion con el kernel 9.5 y el boot camaleon y nada La pregunta es alquien lo ha podido instalar en un equipo con estas caracteristicas: Board Asrock Wolfdale 1333-D667 Procesador Intel Dual core 1.6 Memoria 2GB dual channel discos 2 SATA 160GB disco 1 IDE 40GB USB Unidad DVD LG IDE Con las versiones anteriores no podia ni siquiera arrancar desde el DVD de instalacion pero con esta hago todo hasta el promer reinicio y luego Kernel Panic. A manera de nota la unica distro que he podido instalar en mi equipo es la Leo4allv2 pero al 10.5.2 y quisiere tener lo ultimo en leo 10.5.5. Bueno espero la ayuda de todos ustedes. Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-989336 Share on other sites More sharing options...
pere Posted December 6, 2008 Share Posted December 6, 2008 Como están puestas las opciones de la CPU en tu bios? Puedes ponerlas aqui? Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-989534 Share on other sites More sharing options...
Bernardo Avila Marquez Posted December 7, 2008 Share Posted December 7, 2008 En la bios lo unico que modifico es la configuracion de los IDE y los SATA de enable a compatible con la opcion sata 2 y 4 mas ide 1 Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-990357 Share on other sites More sharing options...
pere Posted December 7, 2008 Share Posted December 7, 2008 En la bios lo unico que modifico es la configuracion de los IDE y los SATA de enable a compatible con la opcion sata 2 y 4 mas ide 1 Te he preguntado que como tienes los settings de la cpu en la bios, no que qué tocas tú .... XD Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-990534 Share on other sites More sharing options...
Bernardo Avila Marquez Posted December 21, 2008 Share Posted December 21, 2008 Hola hasta que se hizo la luz y se pudo instalar iatkos 10.5.5 en mi asrock wolfdale, pero actualmente tengo un problema y es que al momento de iniciar el sistemas comienza con la manzanita luego de eso la pantalla se torna negra y el monitor entra en reposo, despues de uno 1 o 1 1/2 muestra el pantallazo azul con para elegir el usuraio, tengo instalado los drivers de Nvinject 0.2.1 y los controladores que aprecen en la instalacion inicial , graphics update ademas al momento de reiniciar me genera un kernel pancic a modo texto o me muestra en pantallazo de error con los diferentes idiomas, asi cuando no hay harware compatible. en la especificacion de la tarjeta grafica muestra core image software, duplicado desactivado y quartz extreme incompatible, y otra cosita en la configuracion de la memoria ram muestra esto 1GB SDRAM 0MHZ la tarjeta de video es un geforce 6200 turbocache PCIe de 128MB y otra pregunta la ultima y ya como hago para pasarlo al español ya que trate con los pkg de idioma del leo4allv2 y no funcionaron Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-1008397 Share on other sites More sharing options...
Derty Posted December 21, 2008 Share Posted December 21, 2008 bernardo, fijate aqui si esta la bios de tu mother, en general las aasrock nesecitan bios parchadas. http://www.osxcores.site50.net/page1/page1.html lo del idioma, tienes que ir a preferencias de sistema, internacional y poner español primero, sal y entra de nuevo. Link to comment https://www.insanelymac.com/forum/topic/138764-ya-subieron-la-iatkos-5i/#findComment-1008517 Share on other sites More sharing options...
Recommended Posts