Help with Leopard Install

[superviza]

Howy,

 

Im a long time osx user and have a spare x86 box so I thought I would try a osx86 install.

 

I have Leo4allv3final and Kalyway 10.5.2 ISO's and both of them cause the same problelm. The system roboots soon after kicking off the kernal.

 

If I boot with the -x flag, the system will move further and load a whole buch of .kext's and then reboots.

 

Im currently downloading "JaS OSx86 10.5.4 Client Server Intel SSE2 SSE3" to give it a try.

 

Looking below at my system config, can you see any major problem(s) ?

 

 

 

 

CPU-Z 1.48 report file

 

Processor(s) Number of processors1 Number of cores1 per processor Number of threads1 per processor NameIntel Celeron Code NameNorthwood SpecificationIntel® Celeron® CPU 2.40GHz PackageSocket 478 mPGA Family/Model/SteppingF.2.9 Extended Family/ModelF.2 Brand ID10 Core SteppingD1 Technology0.13 um Core Speed2394.2 MHz Multiplier x Bus speed24.0 x 99.8 MHz Rated Bus speed399.0 MHz Stock frequency2400 MHz Instruction setsMMX, SSE, SSE2 L1 Data cache (per processor)8 KBytes, 4-way set associative, 64-byte line size Trace cache (per processor)12 Kuops, 8-way set associative L2 cache (per processor)128 KBytes, 2-way set associative, 64-byte line size Chipset & Memory NorthbridgeIntel i865P/PE/G/i848P rev. A2 SouthbridgeIntel 82801EB (ICH5) rev. 02 Graphic InterfaceAGP AGP Revision3.0 AGP Transfer Rate8x AGP Side Band Addressingsupported, enabled Memory TypeDDR Memory Size1024 MBytes Memory Frequency133.0 MHz (3:4) CAS# Latency (tCL)2.0 clocks RAS# to CAS# (tRCD)3 clocks RAS# Precharge (tRP)3 clocks Cycle Time (tRAS)6 clocks Performance Modeenabled System System ManufacturerHewlett-Packard System NameHP d330 ST(DE129AV) System S/NAUB408026T Mainboard VendorHewlett-Packard Mainboard Model085Ch BIOS VendorHewlett-Packard BIOS Version786B2 v2.18 BIOS Date01/15/2004 Memory SPD Module 1DDR, PC2700 (166 MHz), 128 MBytes, Samsung Module 2DDR, PC3200 (200 MHz), 512 MBytes, unknown brand Module 3DDR, PC2700 (166 MHz), 128 MBytes, Samsung Module 4DDR, PC3200 (200 MHz), 256 MBytes, Kingston Software Windows VersionMicrosoft Windows XP Media Center Edition Professional Service Pack 2 (Build 2600) DirectX Version9.0c

 

 

 

Thank you for your time and help.

 

superviza

[Beerkex'd]

Make sure you pick an SSE2 capable kernel for this system, the CPU doesn't have SSE3.

 

Looks like your motherboard has the same chipset as mine (i865 + ICH5). It's working fine for me.

Check your BIOS settings - AHCI mode for the SATA controller, Legacy USB support to auto, turn on all advanced CPU features and enable ACPI 2.0 + the ACPI tables setting. Those are the settings that work for me.

 

Other than that, try to search for HP D330 here:

http://######.com/osx86search/