Jump to content
InsanelyMac Forum
Sign in to follow this  
Jasafo

Auflösung und dvd laufwerk

Recommended Posts

hi leute hab en kleines problem nachdem ich erfahren habe dass es für meine graka keine treiber gibt wollte ich nun wissen ob ich die auflösung trotzdem in 16:10 umstellen kann

(1280x800 am liebsten 1680x1050) geht das iwie (habs schon mit der boot.plist probiert geht aber nicht)?

dann hab ich noch ein problem mit meinem dvd laufwerk es wird nicht erkannt hab ein

HL-DT-ST DVDRAM GSA-T20N kann man das iwie zum laufen bekommen???

 

Danke schonmal

 

SiSoftware Sandra

 

 

Prozessor

Modell : Intel® Core2 Duo CPU T7500 @ 2.20GHz

Geschwindigkeit : 2.19GHz

Kerne pro Prozessor : 2 Einheit(en)

Threads pro Kern : 1 Einheit(en)

Typ : Mobile, Dual-Core

Interner Datencache : 2x 32kB, Synchron, Write-Thru, 8-weg Satz, 64 Byte Zeilengröße

L2 Onboard Cache : 4MB, ECC, Synchron, ATC, 16-weg Satz, 64 Byte Zeilengröße, 2 geteilte Threads

 

System

System : Gericom Gericom

Platform Compliance : Intel Centrino

Bus(se) : ISA PCI PCIe IMB PCMCIA USB FireWire/1394 i2c/SMBus

MP Unterstützung : Nein

MP APIC : Ja

System BIOS : Phoenix 1.07

Gesamtspeicher : 3GB DDR2 SO-DIMM

 

Chipsatz

Modell : ECS Mobile PM965/GM965/GL960 Express Processor to DRAM Controller

Front Side Bus Geschwindigkeit : 4x 199MHz (796MHz)

Gesamtspeicher : 4GB DDR2 SO-DIMM

Speicherbusgeschwindigkeit : 2x 332MHz (664MHz)

 

Grafiksystem

Adapter : ATI MOBILITY RADEON HD 2600 XT (256MB, PCIe 1.00 x16, SM4.0)

 

Physische Speichergeräte

FUJITSU MHY2250BH 250GB (SATA150, NCQ, 8MB Cache, 387MB FLASH) : 233GB (C:) (D:)

Datenträger 539MB : 514MB

Generic STORAGE DEVICE 2GB (USB) : 2GB (G:)

HL-DT-ST DVDRAM GSA-T20N (ATA33, DVD+-RW, CD-RW, 2MB Cache) : k.A. (E:)

PWFC 3G5EVS527W9 (SCSI, BD-R, HD-DVD-R, DVD+-R-DL, CD-R) : k.A. (F:)

 

Logischer Speichergeräte

NVCACHE : 501MB (FAT32)

Festplatte (C:) : 80GB (NTFS) @ FUJITSU MHY2250BH 250GB (SATA150, NCQ, 8MB Cache, 387MB FLASH)

Data (D:) : 102GB (NTFS) @ FUJITSU MHY2250BH 250GB (SATA150, NCQ, 8MB Cache, 387MB FLASH)

CD-ROM/DVD (E:) : k.A. @ HL-DT-ST DVDRAM GSA-T20N (ATA33, DVD+-RW, CD-RW, 2MB Cache)

CD-ROM/DVD (F:) : k.A. @ PWFC 3G5EVS527W9 (SCSI, BD-R, HD-DVD-R, DVD+-R-DL, CD-R)

Auswechselbares Laufwerk (G:) : 2GB (FAT) @ Generic STORAGE DEVICE 2GB (USB)

 

Peripherie

LPC Hub Controller 1 : ECS ICH8M-E (ICH8 Family) LPC Interface Controller

Audio Gerät : ECS 82801H (ICH8 Family) HD Audio Controller

Audio Codec : Motorola Motorola SM56 Data Fax Modem

Audio Codec : Realtek Semiconductor 883 High Definition Audio

Audio Gerät : ECS HD Audio Codec

Audio Codec : AMD (ATI) AA01h

Serielle Port(s) : 3

Laufwerkscontroller : ECS 82801H (ICH8 Family) Ultra ATA Storage Controllers

Laufwerkscontroller : ECS Mobile SATA AHCI Controller

Laufwerkscontroller : Intel Flash Cache Logic Chip

USB Controller 1 : ECS 82801H (ICH8 Family) USB UHCI #4

USB Controller 2 : ECS 82801H (ICH8 Family) USB UHCI #5

USB Controller 3 : ECS 82801H (ICH8 Family) USB2 EHCI #2

USB Controller 4 : ECS 82801H (ICH8 Family) USB UHCI #1

USB Controller 5 : ECS 82801H (ICH8 Family) USB UHCI #2

USB Controller 6 : ECS 82801H (ICH8 Family) USB UHCI #3

USB Controller 7 : ECS 82801H (ICH8 Family) USB2 EHCI #1

FireWire/1394 Controller 1 : ECS Integrated OHCI IEEE 1394 Host Controller

System SMBus Controller 1 : Intel 801xx/63xx SMBus

 

Drucker- und Faxgeräte

Drucker : Microsoft XPS Document Writer (600x600, Farbwiedergabe)

Drucker : HP Deskjet F4200 series (1200x1200, USB, Farbwiedergabe)

Drucker : Send To Microsoft OneNote Driver (300x300, Farbwiedergabe)

 

Netzwerkdienste

Netzwerkadapter : Realtek RTL8168B/8111B Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)

Netzwerkadapter : Bluetooth Personal Area Network

Wireless-Adapter 1 : Intel® PRO/Wireless 3945ABG Network Connection (802.11g (ERP), WEP n-bit, 54Mbps)

 

Energieverwaltung

Stromnetzstatus : Angeschlossen

Batterie Nr. 1 : 98%

 

Betriebssystem

Windowssystem : Microsoft Windows Vista Home 6.00.6001 (Service Pack 1)

Platform Compliance : x86

 

Windows Leistungsindex

Aktuelles System : 4.8

Share this post


Link to post
Share on other sites
Advertisement

Lass mich kurz in meine Kristallkugel schauen. Ich bin sicher, dass ich irgendwo darin deine Hardwarespezifikationen gesehen habe.

:( Get it?

Share this post


Link to post
Share on other sites

sorry ;o)

SiSoftware Sandra

 

 

Prozessor

Modell : Intel® Core2 Duo CPU T7500 @ 2.20GHz

Geschwindigkeit : 2.19GHz

Kerne pro Prozessor : 2 Einheit(en)

Threads pro Kern : 1 Einheit(en)

Typ : Mobile, Dual-Core

Interner Datencache : 2x 32kB, Synchron, Write-Thru, 8-weg Satz, 64 Byte Zeilengröße

L2 Onboard Cache : 4MB, ECC, Synchron, ATC, 16-weg Satz, 64 Byte Zeilengröße, 2 geteilte Threads

 

System

System : Gericom Gericom

Platform Compliance : Intel Centrino

Bus(se) : ISA PCI PCIe IMB PCMCIA USB FireWire/1394 i2c/SMBus

MP Unterstützung : Nein

MP APIC : Ja

System BIOS : Phoenix 1.07

Gesamtspeicher : 3GB DDR2 SO-DIMM

 

Chipsatz

Modell : ECS Mobile PM965/GM965/GL960 Express Processor to DRAM Controller

Front Side Bus Geschwindigkeit : 4x 199MHz (796MHz)

Gesamtspeicher : 4GB DDR2 SO-DIMM

Speicherbusgeschwindigkeit : 2x 332MHz (664MHz)

 

Grafiksystem

Adapter : ATI MOBILITY RADEON HD 2600 XT (256MB, PCIe 1.00 x16, SM4.0)

 

Physische Speichergeräte

FUJITSU MHY2250BH 250GB (SATA150, NCQ, 8MB Cache, 387MB FLASH) : 233GB (C:) (D:)

Datenträger 539MB : 514MB

Generic STORAGE DEVICE 2GB (USB) : 2GB (G:)

HL-DT-ST DVDRAM GSA-T20N (ATA33, DVD+-RW, CD-RW, 2MB Cache) : k.A. (E:)

PWFC 3G5EVS527W9 (SCSI, BD-R, HD-DVD-R, DVD+-R-DL, CD-R) : k.A. (F:)

 

Logischer Speichergeräte

NVCACHE : 501MB (FAT32)

Festplatte (C:) : 80GB (NTFS) @ FUJITSU MHY2250BH 250GB (SATA150, NCQ, 8MB Cache, 387MB FLASH)

Data (D:) : 102GB (NTFS) @ FUJITSU MHY2250BH 250GB (SATA150, NCQ, 8MB Cache, 387MB FLASH)

CD-ROM/DVD (E:) : k.A. @ HL-DT-ST DVDRAM GSA-T20N (ATA33, DVD+-RW, CD-RW, 2MB Cache)

CD-ROM/DVD (F:) : k.A. @ PWFC 3G5EVS527W9 (SCSI, BD-R, HD-DVD-R, DVD+-R-DL, CD-R)

Auswechselbares Laufwerk (G:) : 2GB (FAT) @ Generic STORAGE DEVICE 2GB (USB)

 

Peripherie

LPC Hub Controller 1 : ECS ICH8M-E (ICH8 Family) LPC Interface Controller

Audio Gerät : ECS 82801H (ICH8 Family) HD Audio Controller

Audio Codec : Motorola Motorola SM56 Data Fax Modem

Audio Codec : Realtek Semiconductor 883 High Definition Audio

Audio Gerät : ECS HD Audio Codec

Audio Codec : AMD (ATI) AA01h

Serielle Port(s) : 3

Laufwerkscontroller : ECS 82801H (ICH8 Family) Ultra ATA Storage Controllers

Laufwerkscontroller : ECS Mobile SATA AHCI Controller

Laufwerkscontroller : Intel Flash Cache Logic Chip

USB Controller 1 : ECS 82801H (ICH8 Family) USB UHCI #4

USB Controller 2 : ECS 82801H (ICH8 Family) USB UHCI #5

USB Controller 3 : ECS 82801H (ICH8 Family) USB2 EHCI #2

USB Controller 4 : ECS 82801H (ICH8 Family) USB UHCI #1

USB Controller 5 : ECS 82801H (ICH8 Family) USB UHCI #2

USB Controller 6 : ECS 82801H (ICH8 Family) USB UHCI #3

USB Controller 7 : ECS 82801H (ICH8 Family) USB2 EHCI #1

FireWire/1394 Controller 1 : ECS Integrated OHCI IEEE 1394 Host Controller

System SMBus Controller 1 : Intel 801xx/63xx SMBus

 

Drucker- und Faxgeräte

Drucker : Microsoft XPS Document Writer (600x600, Farbwiedergabe)

Drucker : HP Deskjet F4200 series (1200x1200, USB, Farbwiedergabe)

Drucker : Send To Microsoft OneNote Driver (300x300, Farbwiedergabe)

 

Netzwerkdienste

Netzwerkadapter : Realtek RTL8168B/8111B Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)

Netzwerkadapter : Bluetooth Personal Area Network

Wireless-Adapter 1 : Intel® PRO/Wireless 3945ABG Network Connection (802.11g (ERP), WEP n-bit, 54Mbps)

 

Energieverwaltung

Stromnetzstatus : Angeschlossen

Batterie Nr. 1 : 98%

 

Betriebssystem

Windowssystem : Microsoft Windows Vista Home 6.00.6001 (Service Pack 1)

Platform Compliance : x86

 

Windows Leistungsindex

Aktuelles System : 4.8

Share this post


Link to post
Share on other sites

niemand? wäre wirklich wichtig weil wenns keine möglichkeit gibt die auflösung hochzudrehen und das dvd lw zum laufen zu bringen dann muss ichs wieder runter schmeißen...

 

bitte sag doch jemand was dazu

 

THX

Share this post


Link to post
Share on other sites

Du kannst in der Boot.plist nur Auflösungen wählen die in VESA supported sind, also kein 16:10...

Wennst mal im Boot-prompt: ?video eingibst, listet er dir alle Auflösungen an die für dich verfügbar sind.

Share this post


Link to post
Share on other sites

alles klar danke...

d.h. keine umstellung auf 16:10 möglich!

 

soo... und was is mit dem dvd laufwerk gibts da ne lösung?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.



  • Posts

    • The forum is infest of ads and Video pub
      Please it is possible to remove ads for members thanks
    • Unfortunately, removing the THB cable isn't working with the ASRock MB, no TB devices show up at all...   When I had the gigabyte Gaming 7 Pro and was waiting for the connector adapter (GB uses a different header pitch: 2mm vs 2.54mm) no TB devices were seen in macos either...
    • Ok so I was having issues with on-board and HDMI audio using VoodooHDA. No AppleALC due to AMD setup. VoodooHDA was crackling on on-board and couldn't sort and there was no HDMI output. So I bought a Sabarent AU-MMSA USB Audio device. Issue is it's acting just like the on-board audio was. With or without VoodooHDA being injected.   Any suggestions?   https://i.imgur.com/AU5uzEQ.png   https://i.imgur.com/I1tmrhk.png    
    • salve a tutti ho questo laptop con ati hd 6370m, tuttavia la risoluzione non è corretta, sulle informazioni dice che ha solo 3mb di ram, qualche consiglio?
    • This is my first hackintosh Build.
      I installed windows 10 and made sure everything was working then
      i Change my bios settings. (See Below)
      I Created a ##### usb with latest version of high Sierra 10.13.4 then installed it after erasing the whole drive
      Booted into MacOS then ran [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] with these settings below then that when i Get the black screen after clover boot screen then i have to turn off the monitor and turn it back on to get a picture on one of my monitors.. I have 2   Ethernet is working


      MOTHERBOARD
      GIGABYTE Z370 AORUS Gaming 5

      CPU
      Intel Core i7-8700K Desktop Processor 6 Cores up to 4.7GHz Turbo Unlocked LGA1151 300 Series 95W BX80684i78700K
      Graphics Card
      Gigabyte AORUS Radeon RX 580 8G 8GB GDDR5 256bit Graphics Card GV-RX580AORUS-8GD
      Cooling
      NZXT Kraken X62 All-in-One 280mm CPU Liquid Cooling System
      Ssd Hardrive
      Crucial MX300 1TB 3D NAND SATA M.2 (2280) Internal SSD
      Memory
      G.SKILL TridentZ RGB Series 16GB (2 x 8GB) 288-Pin DDR4 3000MHz (PC4 24000) 
      CASE
      Nzxt S340VR Elite Computer Case
      Bluetooth / WIFi (removed onboaard wifi and put this card)
      Broadcom BCM94352Z M.2 NGFF 802.11AC 867Mbps BT 4.0 DW1560 for Mac Hackintosh
      Power supply
      EVGA SuperNOVA 650 G3 650W 80 Plus Gold Modular Power Supply

      ##### Settings Quick Start - UEFI Boot Mode Drivers Audio - Misc FakeSMC Plugins FakeSMC HWMonitor Application Network - Intel - Choose latest IntelMausiEthernet USB - Increase Max Port Limit 200 Series Bootloaders - Clover v2.4k r4063 UEFI Boot Mode + Emulated NVRAM Customize Graphics Configuration - AMD Graphics Fixup (required for AMD card!) System Definitions > iMac - iMac18,3  




      UEFI/BIOS settings After POST beep, press/hold DEL key to enter UEFI/BIOS Save & Exit menu - choose Load Optimized Defaults. MIT > Advanced Frequency Settings > Extreme Memory Profile (X.M.P) - choose Profile 1 BIOS Full Screen LOGO Show - I disable this, but not really required Boot Option Priorities - set this to the UEFI option for your UB flash drive. Disable all other choices. Once we run #####, we’ll come back in here and set to your new boot drive (in my case, the UEFI partition of Samsung 960PRO). CSM Support - Disable. Note that the Storage Boot Option Control option which is set to UEFI (desired setting) disappears along with the other 3 options under CSM Support when you set to Disable. Don’t worry, as Storage Boot Option Control apparently stays set to UEFI “under the hood.” Peripherals Initial Display Output - mobo should auto-detect your GPU card, so this should already show PCIe 1 Slot. You shouldn’t have to do installation using internal GPU, then switch to your GPU card. Peripherals > LEDs in sleep, Hibernation, and Soft Off States: OFF [this is optional if you don't want LEDs on 24/7, even in power-off state). USB Configuration > XHCI Hand-off - set to Enable Note: Once Thunderbolt3 AIC is connected, a new dynamic menu option for configuring the Alpine Ridge card appears below the USB DAC option (which lets you set options for USB charging on the appropriate ports). Chipset VT-D - Disabled Internal Graphics - Disabled (this also turns off the DVMT menu options). Wake on LAN Enable - Disable Power ErP - Enabled [UPDATE 25Mar2018] - This is now required to help fix issue where mobo on-board LEDs do not power off when in sleep/shutdown mode. Soft-Off by PWR-BTTN - I set this to Delay 4 Sec. Save & Exit - Choose Save & Exit Setup - this saves your changes and reboots your system.  
×