robstah Posted September 22, 2008 Share Posted September 22, 2008 Hey guys. I am currently running into a couple issues with my laptop hackintosh. Here are the following specs: Brand/Model: HP 8510p CPU: Intel C2D 7300 2.0Ghz (both cores working correctly) RAM: 2GB (2x1 Dual Channel 667Mhz) HD: 160GB SATA Chipset: ICH8? Graphics Card: NVIDIA Quadro FX 570M 256MB (a couple of issues, see below) Wireless: Broadcom BCM4312 (works perfectly like an airport card) OSX Distro: iDeneb 10.5.4 version 1.1 Kernel: Vanilla 9.4.0 Video Card Drivers: nvinjectGo 0.2.0c Audio: Works through speakers only, no mic/headphone support currently Multicard Reader: Does not work, haven't tried drivers yet PCMCIA controller: Ricoh based, every PCCard fix seems to {censored} out video/system, still not working LSPCI: 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port [8086:2a01] (rev 0c) 00:19.0 Ethernet controller [0200]: Intel Corporation 82566MM Gigabit Network Connection [8086:1049] (rev 03) 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) 00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HBM (ICH8M-E) LPC Interface Controller [8086:2811] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) 00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) 01:00.0 VGA compatible controller [0300]: nVidia Corporation Quadro FX 570M [10de:040c] (rev a1) 02:06.2 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 03) 02:06.3 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 20) 02:06.4 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 10) 10:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11a/b/g [14e4:4312] (rev 02) Here is what the system sees graphics wise: Graphics by NVIDIA: Chipset Model: Graphics by NVIDIA Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: NVIDIA (0x10de) Device ID: 0x040c Revision ID: 0x00a1 ROM Revision: NVinjectGo 0.2.0c Displays: Display: Resolution: 1680 x 1050 Depth: 32-bit Color Built-In: Yes Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported QuartzGL: Supported Display Connector: Status: No display connected As you can see, it seems that the system detects the card correctly and I am getting CI/QE and so on. If I remember right, getting everything working required the NVinjectGo package and adding an EFI string via OSX86Tools. The problem is that OSX does not detect a screen. Boot is decently fast, until it goes to a black screen. About 3-5min later, the screen comes on and the login window shows up. After that, if I dare close the lid on the laptop and have the screen turn off, I open it back up to a frozen screen/frozen system. So far, I have tried many different NVCAPs, both forcing it under NVinjectGo and under the EFI string. Nothing changes when I edit those. I've tried a couple other injectors (NVkush as an example) and even with no injectors at all. After setting the EFI, OSX seems to hold its understanding of the card. I even added the vendor ID/device ID to a bunch of related kexts and still nothing. I really do not care much about the long boot, but closing the screen and having it freeze on me is a big pita right now. Any help would be greatly appreciated. I have attached the ioreg information as well. Thanks! ioreg.txt Link to comment Share on other sites More sharing options...
robstah Posted September 22, 2008 Author Share Posted September 22, 2008 UPDATE: I tried adding the vendor/device IDs into Resman and V50Hal and all it would do is show "NVDA: probe(C14B) failed" and freeze the system. What's funny is I never had issues with selecting resolutions before, now I am stuck with 1680x1050x32. I'll keep playing with it however. Also, with limited support and no hardware support, I can now close my laptop and not have it freeze as well. There has to be a way, this card is basically a 8600M GT. Link to comment Share on other sites More sharing options...
robstah Posted September 23, 2008 Author Share Posted September 23, 2008 I am back to having the 570m run with full compatibility, but when I close the screen, the laptop either shuts off or it freezes. The boot times have decreased after removing a bunch of kexts that were only causing errors. Could this be ACPI related? Graphics/Displays: NVIDIA Quadro FX 570M: Chipset Model: NVIDIA Quadro FX 570M Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: NVIDIA (0x10de) Device ID: 0x040c Revision ID: 0x00a1 ROM Revision: NVIDIA Quadro FX 570M OpenGL Engine [EFI] Displays: Display: Resolution: 1680 x 1050 Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported QuartzGL: Supported Rotation: Supported Display Connector: Status: No display connected Link to comment Share on other sites More sharing options...
jackg330 Posted October 25, 2008 Share Posted October 25, 2008 Hi, Would you be so kind to elaborate, how did you installed NVinjectGo and added EFI string? I do have Thikpad T61p and the same Quadro 570 video card. I would like to try to do the same Thanks ------------ As you can see, it seems that the system detects the card correctly and I am getting CI/QE and so on. If I remember right, getting everything working required the NVinjectGo package and adding an EFI string via OSX86Tools. -------------- Link to comment Share on other sites More sharing options...
defn Posted April 7, 2009 Share Posted April 7, 2009 Hi,Would you be so kind to elaborate, how did you installed NVinjectGo and added EFI string? I do have Thikpad T61p and the same Quadro 570 video card. I would like to try to do the same Thanks ------------ As you can see, it seems that the system detects the card correctly and I am getting CI/QE and so on. If I remember right, getting everything working required the NVinjectGo package and adding an EFI string via OSX86Tools. -------------- Ditto to this. I installed NVinjectGo and NVKush and rebooted -- it just hangs on boot. Second thing is -- What is the EFI string you used? Could you please be more specific about how you're going through the initial setup. Simply being able to select a resolution would be an improvement over my current setup. I am running a t61p as well. Also, how slow are you talking when you say "slow". I'm waiting a few minutes. Are you suggesting it takes longer than that? 15 minutes? Thanks Link to comment Share on other sites More sharing options...
supermx3 Posted April 9, 2009 Share Posted April 9, 2009 does your laptop sleep? if not thats where your getting your issue when you close the screen, my buddies laptop does the same thing when he tries to close it with the system on Link to comment Share on other sites More sharing options...
Recommended Posts