nesty12 Posted September 5, 2008 Share Posted September 5, 2008 Hey guys, im new to this form. I ran into a problem installing Kallyway onto my new computer. It starts the boot then i get a firewire error then waiting for root device. My computer contains the following: Asus P5Q Deluxe Intel Q660 2.4 GHZ 4 GB Crucial Ballistix Tracer DDR2 1066Mhz PC2-8500 2X 500 GB sata seagate beracuda drives Sata DVD RW NVIDEA GeForce 8800 GT if anyother information is needed please let me know. Thanks, Link to comment Share on other sites More sharing options...
i*C Posted September 5, 2008 Share Posted September 5, 2008 run boot in verbose mode, at darwin press F8 and type -v enter, post your screen here Link to comment Share on other sites More sharing options...
kennyp Posted September 5, 2008 Share Posted September 5, 2008 Hey guys, im new to this form. I ran into a problem installing Kallyway onto my new computer. It starts the boot then i get a firewire error then waiting for root device. My computer contains the following: Asus P5Q Deluxe Intel Q660 2.4 GHZ 4 GB Crucial Ballistix Tracer DDR2 1066Mhz PC2-8500 2X 500 GB sata seagate beracuda drives Sata DVD RW NVIDEA GeForce 8800 GT if anyother information is needed please let me know. Thanks, Good news, your setup will work. Bad news, you must flash your BIOS with one that has been modified Good news, Kabyl has that ready for you to down load here. Bad news, you cannot run your hard drives as IDE Good news, They work great set as AHCI in your BIOS Bad News, other things on the mobo will not work OOB Good news, there is a thread just waiting to help here Sorry for the way I responded...but hay, Itr was fun Good luck Kenny Link to comment Share on other sites More sharing options...
Recommended Posts