irix Posted August 26, 2008 Share Posted August 26, 2008 Hi, I found a 9800GT so never mind my 9600GT topic as this probably won't work very soon. So with the 9800GT installed (Gigabyte version, 512MB) I installed 10.5.4 from the iATOS v4 release. Internet and sound work fine, resolutions are fine too but I miss the great QE support Can anybody help me out on this? The showed monitor is just a temporary one I always use to install stuff. Graphics by NVIDIA: Chipset Model: Graphics by NVIDIA Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: NVIDIA (0x10de) Device ID: 0x0605 Revision ID: 0x00a2 ROM Revision: NVinject 0.2.1 Displays: Hanns.G HW173: Resolution: 1440 x 900 @ 75 Hz Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Display Connector: Status: No display connected So any hints/topics how to get QE to work are very much appriciated. Thanks! Link to comment Share on other sites More sharing options...
irix Posted August 26, 2008 Author Share Posted August 26, 2008 Success, finally! Graphics by NVIDIA: Chipset Model: Graphics by NVIDIA Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: NVIDIA (0x10de) Device ID: 0x0605 Revision ID: 0x00a2 ROM Revision: NVinject 0.2.1 Displays: Hanns.G HW173: Resolution: 1440 x 900 @ 75 Hz Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Rotation: Supported Display Connector: Status: No display connected I installed the v52 (for 10.5.4) version of NVInstaller and it works as a charm, except I don't see any difference yet, must be some option ;-) Link to comment Share on other sites More sharing options...
Commander Waffles Posted September 15, 2008 Share Posted September 15, 2008 I bought an EVGA 9800gt, I can confirm it works OOTB with iDeneb v1.1 (with the Nvidia 512mb driver) Link to comment Share on other sites More sharing options...
vald Posted March 7, 2009 Share Posted March 7, 2009 hi, i have 9800gt 512 working on osx86, but i can't get it to work to 1680x1050 resolution, when i set it to 1680x1050 the screen turns blue, and cant change it until i restart.. and then it's back on 1440x900 does anybody know a solution to this ? Link to comment Share on other sites More sharing options...
Recommended Posts