orsyy Posted July 25, 2008 Share Posted July 25, 2008 i have a problem. after i successfully installed leopard on my computer it gives me a weird problem, i took a picture so you guys can see it and maybe tell me what i did wrong, here is the picture. Reduced: 64% of original size [ 800 x 600 ] - Click to view full image maybe i formated the partition wrong, i dont know what to do anymore. i hope someone can give me a hand. Link to comment Share on other sites More sharing options...
Poco Posted July 25, 2008 Share Posted July 25, 2008 Formatting is correct you need a bootloader. Did you dual boot? If so: 1)Install with pcefi 2)Restart and press F8 at countdown 3)"-s" 4)"disk -e /dev/rdisk0" 5)"flag 1" 6)"quit" 7)"reboot" 8)Copy the chain0 file onto the Vista drive 9)In command prompt 10)bcdedit /copy {current} /d “Mac OS X” 11)bcdedit /enum active 12)bcdedit /set {"put the guid here"} PATH \chain0 Then when you restart you have a Vista bootloader. You select the second option and it brings you up to efi bootloader. Select OS X drive to run. iPoco Link to comment Share on other sites More sharing options...
orsyy Posted July 25, 2008 Author Share Posted July 25, 2008 no i didn't dualboot, i'm only using one os on that computer, so if i'm not dualbooting, what do you think that might be the problem? Link to comment Share on other sites More sharing options...
Poco Posted July 28, 2008 Share Posted July 28, 2008 You need a bootloader. Search around this board to find the installation instructions for pcefi. If you were dual booting it makes things easier. iPoco Link to comment Share on other sites More sharing options...
orsyy Posted July 28, 2008 Author Share Posted July 28, 2008 i fixed it bro, thanks. Link to comment Share on other sites More sharing options...
Recommended Posts