JazzMan69 Posted July 24, 2008 Share Posted July 24, 2008 Hello Everyone! I have a little problem booting OSX after install. I successfully installed the Kalyway 10.5.2 Intel/AMD OSX last night, it prompted for me to restart and I did, however I forgot to take the DVD out of the tray so I had to press F8 and took me to a command line which I pressed enter and booted the DVD Boot Disk again. It would only boot Vista and does not have a boot option to choose between OSX or Vista, I know the OSX installed because when I ran the Boot Disk it would say 8 GB left from the 15 GB partition that I had used for installation. My System Specs: ASUS A8N SLI-Deluxe Motherboard (nForce 4) Athlon 64 FX-55 CPU 2 GB 400 MHz DDR2 SDRAM 74 GB Raptor 10k RPM (OS Drive) 750 GB Data (Both SATA) Audigy II Sound Card ATI Radeon HD 3870 512 MB So My Vista is installed on my 74 GB Raptor SATA HD and I partitioned 15 GB on my 750 GB Data SATA HD. I formatted the 15 GB Partition to FAT32, Primary, Active (Named it Mac OSX). Rebooted inserted OSX Boot Disk, once booted I went to the Utility Disk and did "Erase" on the 15 GB Partition and a window poped up and asked how I wanted it formated, I picked Extended (Journaled) or something like that. But I did not see any option to have it "MBR" or anything like that. Anyway, I continued and it detected all my drives, installed it on the newly formatted partition for OSX, install was successful. Rebooted but did not boot OSX, rebooted again and went to Vista. Any help would be great! Thanks! Link to comment https://www.insanelymac.com/forum/topic/117479-boot-up-help-with-kalyway-1052-amd-install/ Share on other sites More sharing options...
Poco Posted July 24, 2008 Share Posted July 24, 2008 You have to edit the bcd to include it. You can use the command prompt or easybcd. iPoco Link to comment https://www.insanelymac.com/forum/topic/117479-boot-up-help-with-kalyway-1052-amd-install/#findComment-832399 Share on other sites More sharing options...
gyrene2083 Posted July 24, 2008 Share Posted July 24, 2008 Hello All, Well I am having a similar problem. I tried to EasyBCD, but now I get a chain error msg. Any ideas? I too, have Vista on one drive, and installed Leopard on another drive. Link to comment https://www.insanelymac.com/forum/topic/117479-boot-up-help-with-kalyway-1052-amd-install/#findComment-832563 Share on other sites More sharing options...
Recommended Posts