Jump to content

Construir Hackintosh (Componentes)


4 posts in this topic

Recommended Posts

He estado buscando por tiendas, y encontrado estos componentes, que creo que deberían de funcionar bastante bien, echalos un vistazo por favor, a ver que te parecen:


Placa Base: GIGABYTE 945GCM-S2L MATXS775 40€

Microprocesador: MICROPROCESADOR INTEL C2DUO 775 E4600 2.4 ALLEND B 72,47€

Memoria: KINGSTON DDR2 2GB PC 800 35,80€

Tarjeta Gráfica: POINT OF VIEW GEFORCE 8600GT 1GB PCX 65€


Muchas Gracias!!!

Link to comment
Share on other sites

Hello. This is what you need for this guide

Kalyway 10.5.2 DVD


Audio Drivers

First, set up your board to your liking. If you're using 533MHz RAM, go into the BIOS and increase voltage by 0.5V this should give you a clock speed of 667MHz.

Now, install Kalyway with the following options

Change the "Sound Drivers" to the third option.

Put the SMBIOS to the iMac or 667 MHz one. They are the same =]

Now, choose your other settings and run through installer.

Remember, unless you are sure you're C2D or C2Q does not boot without the cpus=1 flag, dont put it on.

Now, your Ethernet should work out of the box. You just need the audio drivers and it should be working. They can be downloaded:





After that, you should be done!


mejor una P35-DSL3 69 EUROS.

Link to comment
Share on other sites


  • Create New...