Jump to content

Intel DX38BT problems

slim2001

By slim2001,
in OSx86 10.5 (Leopard)

 Share
6 posts in this topic

Recommended Posts

slim2001
slim2001
Posted
Posted

I’ve installed few version of hackintosh on the DX38BT motherboard and I’m getting 3 problems :

 

1. I cannot get the sound card to work I’ve tried Taruga method without any luck, this is my Linux dump;

 

Codec: SigmaTel STAC9274D
Address: 2
Vendor Id: 0x83847621
Subsystem Id: 0x80860519
Revision Id: 0x100201
No Modem Function Group found
Default PCM:
   rates [0x7e0]: 44100 48000 88200 96000 176400 192000
   bits [0xe]: 16 20 24
   formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=0
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
 Amp-Out caps: N/A
 Amp-Out vals:  [0x6f 0x6f]
 Power: 0x0
Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
 Amp-Out caps: N/A
 Amp-Out vals:  [0xff 0xff]
 Power: 0x0
Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
 Amp-Out caps: N/A
 Amp-Out vals:  [0xff 0xff]
 Power: 0x0
Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
 Amp-Out caps: N/A
 Amp-Out vals:  [0xff 0xff]
 Power: 0x0
Node 0x06 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
 Amp-Out caps: N/A
 Amp-Out vals:  [0xff 0xff]
 Power: 0x0
Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo
 Power: 0x0
 Connection: 1
    0x1b
Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo
 Power: 0x0
 Connection: 1
    0x1c
Node 0x09 [Audio Input] wcaps 0x1d0541: Stereo
 Power: 0x0
 Connection: 1
    0x1d
Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x08173f: IN OUT HP Detect
 Pin Default 0x0221401f: [Jack] HP Out at Ext Front
   Conn = 1/8, Color = Green
 Pin-ctls: 0xc0: OUT HP
 Connection: 3
    0x02* 0x03 0x06
Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x08173f: IN OUT HP Detect
 Pin Default 0x02a1902e: [Jack] Mic at Ext Front
   Conn = 1/8, Color = Pink
 Pin-ctls: 0x24: IN
 Connection: 3
    0x02* 0x03 0x06
Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x081737: IN OUT Detect
 Pin Default 0x01813021: [Jack] Line In at Ext Rear
   Conn = 1/8, Color = Blue
 Pin-ctls: 0x20: IN
 Connection: 1
    0x03
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x08173f: IN OUT HP Detect
 Pin Default 0x01114010: [Jack] Speaker at Ext Rear
   Conn = 1/8, Color = Green
 Pin-ctls: 0x40: OUT
 Connection: 1
    0x02
Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x081737: IN OUT Detect
 Pin Default 0x01a19020: [Jack] Mic at Ext Rear
   Conn = 1/8, Color = Pink
 Pin-ctls: 0x24: IN
 Connection: 1
    0x04
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x081737: IN OUT Detect
 Pin Default 0x01111012: [Jack] Speaker at Ext Rear
   Conn = 1/8, Color = Black
 Pin-ctls: 0x40: OUT
 Connection: 1
    0x05
Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x0837: IN OUT Detect
 Pin Default 0x01117011: [Jack] Speaker at Ext Rear
   Conn = 1/8, Color = Yellow
 Pin-ctls: 0x40: OUT
 Connection: 1
    0x04
Node 0x11 [Pin Complex] wcaps 0x400181: Stereo
 Pincap 0x0837: IN OUT Detect
 Pin Default 0x400000fb: [N/A] Line Out at Ext N/A
   Conn = Unknown, Color = Unknown
 Pin-ctls: 0x00:
 Connection: 1
    0x03
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
 Pincap 0x0820: IN
 Pin Default 0x500000fe: [N/A] Line Out at Int N/A
   Conn = Unknown, Color = Unknown
 Pin-ctls: 0x00:
Node 0x13 [Pin Complex] wcaps 0x400001: Stereo
 Pincap 0x0820: IN
 Pin Default 0x500001ff: [N/A] Line Out at Int N/A
   Conn = Unknown, Color = Unknown
 Pin-ctls: 0x00:
Node 0x14 [Pin Complex] wcaps 0x400001: Stereo
 Pincap 0x0820: IN
 Pin Default 0x500001fd: [N/A] Line Out at Int N/A
   Conn = Unknown, Color = Unknown
 Pin-ctls: 0x00:
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
 Amp-Out vals:  [0x00 0x00]
 Connection: 9
    0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
 Amp-Out vals:  [0x00 0x00]
 Connection: 9
    0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
 Amp-Out vals:  [0x00 0x00]
 Connection: 9
    0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x18 [Audio Selector] wcaps 0x300103: Stereo Amp-In
 Amp-In caps: N/A
 Amp-In vals:  [0x00 0x00]
 Connection: 1
    0x15
Node 0x19 [Audio Selector] wcaps 0x300103: Stereo Amp-In
 Amp-In caps: N/A
 Amp-In vals:  [0x00 0x00]
 Connection: 1
    0x16
Node 0x1a [Audio Selector] wcaps 0x300103: Stereo Amp-In
 Amp-In caps: N/A
 Amp-In vals:  [0x00 0x00]
 Connection: 1
    0x17
Node 0x1b [Audio Selector] wcaps 0x30090d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 3
    0x18* 0x13 0x14
Node 0x1c [Audio Selector] wcaps 0x30090d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 3
    0x19* 0x13 0x14
Node 0x1d [Audio Selector] wcaps 0x30090d: Stereo Amp-Out
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80 0x80]
 Connection: 3
    0x1a* 0x13 0x14
Node 0x1e [Audio Output] wcaps 0x40211: Stereo Digital
 PCM:
   rates [0x7e0]: 44100 48000 88200 96000 176400 192000
   bits [0xe]: 16 20 24
   formats [0x5]: PCM AC3
Node 0x1f [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Node 0x20 [Audio Input] wcaps 0x140311: Stereo Digital
 PCM:
   rates [0x160]: 44100 48000 96000
   bits [0xe]: 16 20 24
   formats [0x5]: PCM AC3
 Connection: 1
    0x22
Node 0x21 [Pin Complex] wcaps 0x400301: Stereo Digital
 Pincap 0x0810: OUT
 Pin Default 0x01452130: [Jack] SPDIF Out at Ext Rear
   Conn = Optical, Color = Grey
 Pin-ctls: 0x40: OUT
 Connection: 5
    0x1e* 0x1f 0x1b 0x1c 0x1d
Node 0x22 [Pin Complex] wcaps 0x430681: Stereo Digital
 Pincap 0x0810024: IN EAPD Detect
 Pin Default 0x400000fc: [N/A] Line Out at Ext N/A
   Conn = Unknown, Color = Unknown
 Pin-ctls: 0x00:
 Power: 0x0
Node 0x23 [beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
 Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
 Amp-Out vals:  [0x00]
Node 0x24 [Volume Knob Widget] wcaps 0x600000: Mono

 

2. The network card does not work, I can't find the right kext. Intel 82566DC Gigabit Ethernet Controller.

 

3. I can use Leo for about 10 minutes then the screen flashes once after that all I can see is the desktop

background pic and nothing else, I can move the mouse but that is all I can do.

 

 

 

Q9550

Corsair DDR3 XMS3 2GB

Nvidia 7600GT

DX38BT

Link to comment
https://www.insanelymac.com/forum/topic/114239-intel-dx38bt-problems/
Share on other sites
  • 2 weeks later...
  • 3 weeks later...
fluffy…bunny
fluffy…bunny
Posted
Posted
Has anyone had any luck with this motherboard?

 

Sorry for pure english or mistakes.

 

Yep! I just set-up my new computer on this board. The main OS is Windows 2k3.

 

01 Intel DX38BT (BIOS rev. 1782)

02 Intel Q9450

03 OCZ ReaperX 1333MHz

04 nVidia 8600GT by MSI 512MB (not for games, just display)

05 Adaptec SCSI Controllers 29320LPE & 2940AU

06 2x SCSI disks Fujitsu 74GB (not for Mac)

07 SATA disk WD Raptor 74GB (for Mac)

08 IDE DVD-RWs Plextor 750A & Pioneer-Buffalo DVR-111L

09 USB ext. DVD-RW Plextor 608CU (should work under Mac)

10 SCSI CD-RW Yamaha CRW-F1 (should work under Mac)

11 Soundcard ESI Julia (should work under Mac)

 

Firewire, Infrared and on-board sound are disabled.

On-board controllers are really piece for {censored} even on Windows, but I don't have any available slots for additional LAN :((

 

I'm new to Hackintosh and Mac OSX, but have good experience on FreeBSD.

Please, could you explain what exactly hackintosh image should I download by torrents or Usenet.

 

I've found only this one "Mac.OSX.Leopard.V10.5.2-HOTiSO" with h-mol1052.dmg inside. Is it all right for beginning?

 

BTW My SATA disk is also a bootable disk for Windows 2003 (C:\)

  • 5 months later...
Norrin
Norrin
Posted
Posted

I'm having good luck so far.

 

SLIM2001, can you please update this thread with the network information.

I know you got it done, because I got the info from another post that you made.

 

I'm looking for it now. I'll update this thread if / when I find it.

 

So far,

- SATA detecting using the September iDeneb nForce Patch / fix

- e1000 network working

- no HD audio yet, although I think there's a way. SLIM2001 should know.

- and I don't have the Marvell IDE controller working yet, and consequently my DVD burner b/c of it.

I haven't looked into that one yet.

 Share
Go to topic listing
×
×
  • Create New...