MajorKen Posted July 4, 2008 Share Posted July 4, 2008 Ok before anything else, below are my specs. See if I miss something or there's a problem with my hardware: Mobo: Intel D 945 GTP DDR2: 533CL Intel NH 82801GB ALC6555 Palit 7300 LE 128 MB PCI-E Pentium D 4 3.0Ghz Here's my story: I was able to install the Leo4Allv3 after many attempts. I was delighted to see the main window of Leopard and the Finder and all stuffs, but that was only for a while coz the mouse freezes. I restarted it but no more appears in my screen. The screen keeps telling Check Signal Cable. Restarted it again and press anything I could in the keyboard hoping a ray of light would appear and so it does: Intel Boot Agent FE V.4 Copyright blah blah Intel Boot Agent PXE-Base Code Copyright blah blah PXE-E61: Media Test Failure, check cable PXE-MOF: Exiting Intel Boot Agent Restarted it again, with and without cd but no more luck. Nothing appears as if the CPU is dead but monitor is On. Please help me to get back my sanity!!! Thanks in advance and more power! Link to comment https://www.insanelymac.com/forum/topic/113933-no-display-on-screen-help/ Share on other sites More sharing options...
Recommended Posts