ApplePwnage Posted May 28, 2008 Share Posted May 28, 2008 Ok so heres my problem... I put my dvd into my computer, set the bios to boot from it, and do the press any key thing it loads about 5 lines of code then sudenly restarts the computer, so then I find 2 things, First I press f8 and enter "-x" (start in safe mode) I think ok I've fixed the problem because it does about 800-5000 lines of code pretty fast but then it gets to a certain point and guess what? it restarts again, so I find another thing I press f8 and enter "tohkernel cpus=1" didn't work I tryed both of them together didn't work I tried removing the space so it's "tohkernelcpus=1" and It still doesn't work. Can anyone help me with this restarting problem I really want OS X Leopard. I got the ISO off of ISOHUNT.COM and everyone there says it worked, I used active ISO burner to burn the ISO, The blank dvd's I use are Verbatim DVD+R, I tried burning it 3 times. I don't want to have to download another different one because I don't have allot of Bandwidth. The 10.5.1 version claimed to run on 512mb of ram so I assume the same from this one. My Specs are: Manufacturer: IBM Video Card: Geforce 6600 GT Memory/Ram: 766 MB CPU model: Intel Pentium 4 CPU 2.40G Hard Drive: 225 GB Sound Card: SoundMax Integrated Digital Audio PLEASE HELP ME!!! ANYONE!!!! PLEASE!!!!!! Link to comment https://www.insanelymac.com/forum/topic/107230-hmm-confusing-problem-with-kalyway-1052-leopard-install/ Share on other sites More sharing options...
KiTzBiTz Posted May 28, 2008 Share Posted May 28, 2008 All I can say is..check your BIOS setting...or you can go to this site for a cool TUTORIAL BIOS TUTORIAL Link to comment https://www.insanelymac.com/forum/topic/107230-hmm-confusing-problem-with-kalyway-1052-leopard-install/#findComment-760798 Share on other sites More sharing options...
Recommended Posts