kalyway 10.5.1 and vista dual boot

[claudiuslu]

i have a Asus G1S with nvidia card, have 3 partitions, C has vista already installed, D for files only, and got another partiton using Disk Manager from C to install Mac OSX. Booted up DVD using -v -x -y cups=1, then using diskutility to formatted that partition using MBR, the installation was good, no error. The the computer restarts, but it wont go anywhere. just a black screen with a white line flashing. now cant even boot into vista. please help???

[jizzle]

i have a Asus G1S with nvidia card, have 3 partitions, C has vista already installed, D for files only, and got another partiton using Disk Manager from C to install Mac OSX. Booted up DVD using -v -x -y cups=1, then using diskutility to formatted that partition using MBR, the installation was good, no error. The the computer restarts, but it wont go anywhere. just a black screen with a white line flashing. now cant even boot into vista. please help???

 

This guide is for restoring our nice, working hackintosh's darwin bootloader.

 

Basically, Vista RTM foobars our working MBR's bootloader and you get "HFS+ partition error".

In following, I will assume we have one HDD with two partitions: part#1 = OSX and part#2 = Vista (note: this is important, make sure u flag the right partition as described below and also this guide is for another error called hfs= partition, but it would also work for your problem)

 

1. Boot off OSX dvd disc in single user mode (press F8 and type -s)

2. At single user prompt

fdisk -e /dev/rdisk0

flag 1

update

write

quit

4 reboot

 

At this point OSX should boot up, just like prior to Vista installation.

1 In a terminal window,

su root

fdisk -e /dev/rdisk0

flag 2

quit

2 reboot

 

Vista will say "\Window\system32\winload" corrupted, and it will tell you to insert Vista disc. Boot from Vista CD and click on "repair computer", if the Vista CD is able to detect your Vista OS then it will say "windows have found error with ur boot MBR" or something this, go ahead click "repair" or "ok", but If Vista's CD is unable to detect the Vista OS, then go ahead follow the steps below. Boot into Vista CD and click on "Repair Computer" then click "Next" or watever, and then from the next window, click on "command Prompt" or something like that. Then :-

1. Diskpart

2. List Disk

3. Select Disk # (if u only have one HD then it should read "Select Disk 0")

4. List Partition

5. Select Partition # (replace # with ur vista partition, if vista was installed first then it should be partition 1)

6. Active

7. Exit

8. Restart your computer with Vista CD still in the CD ROM

9. Boot into the Vista CD.

10. Click on "repair computer" (this time Vista CD should find ur Vista OS and it will say "windows has found error, would u like to fix it", click "ok" or "yes" watever it is.

11. Computer will restart, but make ur u take your Vista CD out before it restarts.

 

 

1. Boot off OSX dvd disc for single user one last time (press F8 and type -s)

2. At single user prompt

fdisk -e /dev/rdisk0

flag 1

quit

3. reboot

 

You will discover that Vista recovered and left MBR's darwin bootloader intact

 

Guide Taken from :- http://www.errorforum.com/microsoft-window...stallation.html

 

hope this helps:)

[claudiuslu]

it doesnt work, i boot from DVD using f8 -s, then letters flashing throu screen, then it restarts, and is back to the black screen with a white line flashing. please help

i have vista install first on c drive, then install kalyway on another partition. now cant even boot into vista.

[claudiuslu]

fixed all using this French guide I found http://osx86.xooit.info/t1605-TUTO-dual-bo...ur-Asus-G1S.htm had to translate using Google Translate. Here is the translated version http://www.google.com/translate?u=http%3A%...=en&ie=UTF8

After i use EasyBCD and restart the computer, see both vista and leopard, but when i choose leopard it wont boot, only a black screen with a flash line. please help????