Galaxas0 Posted May 1, 2008 Share Posted May 1, 2008 requires ----------- - Kalyway 10.5.2 - dvd burner, dvd+r's - patience, quick fingers Step 1 - Get Kalyway 10.5.2, burn on DVD+R at 2.4x speed Step 2 - press f1 for bios Step 3 - enable speedstep, only keep dvd drive on boot list, nothing else Step 4 - boot darwin, press F8, type -v Step 5 - wait, for 30 min... then as soon as it loads, click next on language, and continue Step 6 - fire up disk util, and press on HD, partition, more, GUID mode Step 7 - Partition as "Leopard" with journaled Step 8 - select sleepkernel, jas apci etc, and only network drivers step 9 - select apps and install, wait for reboot... then hard reset after messages step 10 - boot, wait 30 min again..... and go through setup, and done! Time took me 2hrs don't know about wifi, but sound works oob, dvd fine, etc. You just learnt this from a 12 year old! Feed back on wifi needed! Typed on leopard. Front Row = no-no! Link to comment Share on other sites More sharing options...
Ashgotti Posted June 1, 2008 Share Posted June 1, 2008 I have it working on a T42 as well, but atheros wifi is a pain to get working (still trying). I know it'll need better videocard support too, otherwise works ok. Link to comment Share on other sites More sharing options...
Recommended Posts