Trung_Nguyen Posted December 14, 2017 Share Posted December 14, 2017 Hello everyone, I have a built in BT4 module DW380, how can I enable continuity on this device? Using bcrmpatchram2 * firmwareREpo Tried C.A.T: Boot progress went about 60-70% then Panic. Thanks. PS: BT information in System Information app Hardware, Features, and Settings: Name: Trung’s MacBook Pro //MBP9,2 Address: XX-XX-XX-XX-XX-XX Bluetooth Low Energy Supported: Yes Handoff Supported: No Instant Hot Spot Supported: No Manufacturer: Broadcom Transport: USB Chipset: 20702A3 Firmware Version: v14 c5543 Bluetooth Power: On Discoverable: Off Connectable: No Auto Seek Pointing: On Remote wake: On Vendor ID: 0x413C Product ID: 0x8197 HCI Version: 4.0 (0x6) HCI Revision: 0x15A7 LMP Version: 4.0 (0x6) LMP Subversion: 0x220E Device Type (Major): Computer Device Type (Complete): Mac Portable Composite Class Of Device: 0x38010C Device Class (Major): 0x01 Device Class (Minor): 0x03 Service Class: 0x1C0 Auto Seek Keyboard: On Link to comment Share on other sites More sharing options...
eSaF Posted December 14, 2017 Share Posted December 14, 2017 I am no expert on the subject but looking at your readout, I'll guess your card is not supported or is not recognised by OS X. For Continuity to work, Handoff and Instant Hot Spot must be supported. Good luck. Link to comment Share on other sites More sharing options...
Recommended Posts