dj_just Posted February 26, 2016 Share Posted February 26, 2016 Hello! Anyone can help me , with launch my hd 5650 videocard on 10.11.3? All works fine only this not working. Link to comment Share on other sites More sharing options...
fantomas Posted February 27, 2016 Share Posted February 27, 2016 Hi We're talking about hd 5650m, right? It seems that your device-id (0x68C11002) is already in AMD5000Controller.kext and AMDRadeonX3000.kext - so that means you don't need any special boot flag to enable QE_CI. Maybe just have to find the best framebuffer for your graphics card - Hoolock could be a good candidate. If you're booting with Chameleon then add this in your org.chameleon.Boot.plist <key>AtiConfig</key> <string>Hoolock</string> And if you use Clover <key>Graphics</key> <dict> <key>FBName</key> <string>Hoolock</string> </dict> Link to comment Share on other sites More sharing options...
dj_just Posted February 27, 2016 Author Share Posted February 27, 2016 Hi We're talking about hd 5650m, right? It seems that your device-id (0x68C11002) is already in AMD5000Controller.kext and AMDRadeonX3000.kext - so that means you don't need any special boot flag to enable QE_CI. Maybe just have to find the best framebuffer for your graphics card - Hoolock could be a good candidate. If you're booting with Chameleon then add this in your org.chameleon.Boot.plist <key>AtiConfig</key> <string>Hoolock</string> And if you use Clover <key>Graphics</key> <dict> <key>FBName</key> <string>Hoolock</string> </dict> Not worked for me. Placed it in org.chameleon.Boot.plist And i have bootloader Enoch. Link to comment Share on other sites More sharing options...
fantomas Posted February 27, 2016 Share Posted February 27, 2016 You should boot with GraphicsEnabler=No Also try another framebuffer (take a look into InfoPlist from AMD5000COntroller.kext) Link to comment Share on other sites More sharing options...
dj_just Posted February 27, 2016 Author Share Posted February 27, 2016 You should boot with GraphicsEnabler=No Also try another framebuffer (take a look into InfoPlist from AMD5000COntroller.kext) I tryed but enything not changed. <key>ATY,Hoolock</key> <dict> <key>aty_config</key> <dict> <key>CFG_FORCE_ICLK</key> <true/> </dict> </dict> <key>ATY,Langur</key> <dict> <key>aty_config</key> <dict> <key>CFG_FORCE_ICLK</key> <true/> </dict> </dict> <key>ATY,Orangutan</key> <dict> <key>aty_config</key> <dict> <key>CFG_GPIO_HIGH</key> <integer>131104</integer> </dict> </dict> <key>ATY,Zonalis</key> <dict> <key>aty_config</key> <dict> <key>CFG_NO_PP</key> <true/> </dict> </dict> Link to comment Share on other sites More sharing options...
Slice Posted February 29, 2016 Share Posted February 29, 2016 [HOW TO] Make Radeon {Desktop or Mobility} be working by using Clover 1 Link to comment Share on other sites More sharing options...
fantomas Posted February 29, 2016 Share Posted February 29, 2016 Not worked for me. Placed it in org.chameleon.Boot.plist And i have bootloader Enoch. I didn't say it will work - as said above, you're device-id is already in these both kexts, so the system should assign the right framebuffer without any customization. Not required any specific flag, it should work OOB. Maybe indeed you should give a try with Clover as Slice suggested Don't give up - good luck Link to comment Share on other sites More sharing options...
Recommended Posts