Sergey Sashin Posted January 27, 2016 Share Posted January 27, 2016 I have a board GA-Z87X-D3H with i7-4770 cpu, 16Gb ddr3, and GTX760 videocard Now it work perfect with Yosemite + Clover UEFI loading Else I have another hard drive with installed El Capitan, which Clover's load from first ssd (where installed Yosemite) Now work usb 2.0 (four ports, two on a front panel and two on a rear) 3.0 ports are not working Need some help to fix USB. Controller is Renesas® uPD720210 (info from Gigabyte's site) Thanks for all info and guides. If I can use guides from (GUIDE) 10.11 full speed USB (series 8/9) keeping vanilla SLE or [GUIDE] USB Fix El Capitan 10.11 Let me know please! Link to comment Share on other sites More sharing options...
Tusskan Posted January 28, 2016 Share Posted January 28, 2016 I have a board GA-Z87X-D3H with i7-4770 cpu, 16Gb ddr3, and GTX760 videocard Now it work perfect with Yosemite + Clover UEFI loading Else I have another hard drive with installed El Capitan, which Clover's load from first ssd (where installed Yosemite) Now work usb 2.0 (four ports, two on a front panel and two on a rear) 3.0 ports are not working Need some help to fix USB. Controller is Renesas® uPD720210 (info from Gigabyte's site) Thanks for all info and guides. If I can use guides from (GUIDE) 10.11 full speed USB (series 8/9) keeping vanilla SLE or [GUIDE] USB Fix El Capitan 10.11 Let me know please! this is so wrong, USB2/3 works great with Yosemite on this board. And it's Intel USB controller, this board has no 3rd party one. For El Capitan i use this https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads it make all ports work in USB2 mode, i didn't figure how to get USB3 working yet. 1 Link to comment Share on other sites More sharing options...
Recommended Posts