imacosiris Posted October 4, 2015 Share Posted October 4, 2015 Hi guys I have some problems after update my hackinosh to El Capitan My previous config was: OS X 10.10.5 with Enoch r2773 My extra folder have this: Extra (folder) Extensions (folder) AppleACPIPlatform.kext FakeSMC.kext NullCPUPowerManagement.kext RealtekRTL8111.kext modules HDAEnabler.dylib Keylayout.dylib klibc.dylib Resolution.dylib Sata.dylib uClibcxx.dylib Extensions.mkext org.chameleon.Boot.plist smbios.plist Motherboard: GIGABYTE GA-EP43T-UD3L (lasted BIOS) Processor: 2.5 Ghz Intel Core 2 Duo Video Card: AMD Radeon HD 6xxx 1024 MB RAM: 16 GB 1333 Mhz DDR3 All working Then i use the method from here to use clover and install "El Capitan" (http://www.insanelymac.com/forum/files/file/448-universal-os-x-installer/) The universal installer v4 by Chris1111 Works perfect, i made and HHD with the final version of "EL Capitan" Then i choose this BOOTLOADER Method: CloverEFI 64-bits using SATA to access drives I' don't use the UEFI method because my mother is a bit old and i think that may be doesn't work After comple the update boot again with the external drive and run the clover install with the same choise, reboot and all works perfect I use this mac with Plex Media Server, this mac stream video to ann apple TV and another iMac, i notice after the upgrade that the stream and copy performance goes to hell i try to play a 200MB SD file over a GB network and video stuck on the first 10 seconds. with OSX 10.10 i has able to play 1080p files over 12GB size over the same conditions I try to copy a file over the network from one mac to another 10GB file size need 2 hours to complete the copy This is my current config in clover, this is my first setup on clover i don't have much expirience with this, i use before Enoch and Chamaleon to build my hackintosh Some one can help me please ? This is my current config on clover (and my previous setup in Enoch) Best regards !! Clover : config.plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>ACPI</key> <dict> <key>DSDT</key> <dict> <key>Debug</key> <false/> <key>Fixes</key> <dict> <key>AddDTGP_0001</key> <true/> <key>AddHDMI_8000000</key> <true/> <key>AddIMEI_80000</key> <true/> <key>AddMCHC_0008</key> <false/> <key>AddPNLF_1000000</key> <true/> <key>DeleteUnused_400000</key> <true/> <key>FIX_ACST_4000000</key> <true/> <key>FIX_ADP1_800000</key> <true/> <key>FIX_INTELGFX_100000</key> <false/> <key>FIX_RTC_20000</key> <true/> <key>FIX_S3D_2000000</key> <true/> <key>FIX_TMR_40000</key> <true/> <key>FIX_WAK_200000</key> <true/> <key>FakeLPC_0020</key> <false/> <key>FixAirport_4000</key> <true/> <key>FixDarwin_0002</key> <false/> <key>FixDisplay_0100</key> <true/> <key>FixFirewire_0800</key> <true/> <key>FixHDA_8000</key> <true/> <key>FixHPET_0010</key> <true/> <key>FixIDE_0200</key> <false/> <key>FixIPIC_0040</key> <true/> <key>FixLAN_2000</key> <true/> <key>FixRegions_10000000</key> <true/> <key>FixSATA_0400</key> <false/> <key>FixSBUS_0080</key> <false/> <key>FixShutdown_0004</key> <true/> <key>FixUSB_1000</key> <false/> <key>NewWay_80000000</key> <true/> </dict> <key>Name</key> <string>DSDT.aml</string> </dict> <key>DropTables</key> <array> <dict> <key>Signature</key> <string>DMAR</string> </dict> <dict> <key>Signature</key> <string>SSDT</string> <key>TableId</key> <string>CpuPm</string> </dict> <dict> <key>Signature</key> <string>SSDT</string> <key>TableId</key> <string>Cpu0Ist</string> </dict> </array> <key>HaltEnabler</key> <true/> <key>SSDT</key> <dict> <key>EnableC2</key> <false/> <key>EnableC4</key> <false/> <key>EnableC6</key> <true/> <key>EnableC7</key> <false/> <key>Generate</key> <dict> <key>CStates</key> <true/> <key>PStates</key> <true/> </dict> </dict> </dict> <key>Boot</key> <dict> <key>Arguments</key> <string>kext-dev-mode=1 rootless=0</string> <key>CustomLogo</key> <false/> <key>DefaultVolume</key> <string>OS X Mavericks</string> <key>Fast</key> <false/> <key>Legacy</key> <string>PBR</string> <key>Log</key> <false/> <key>Timeout</key> <integer>8</integer> <key>XMPDetection</key> <string>-1</string> </dict> <key>Devices</key> <dict> <key>Audio</key> <dict> <key>Inject</key> <string>No</string> </dict> <key>FakeID</key> <dict> <key>ATI</key> <string>0x0</string> <key>IMEI</key> <string>0x0</string> <key>IntelGFX</key> <string>0x0</string> <key>LAN</key> <string>0x0</string> <key>NVidia</key> <string>0x0</string> <key>SATA</key> <string>0x0</string> <key>WIFI</key> <string>0x0</string> <key>XHCI</key> <string>0x0</string> </dict> <key>Inject</key> <false/> <key>USB</key> <dict> <key>AddClockID</key> <true/> <key>FixOwnership</key> <true/> <key>Inject</key> <true/> </dict> </dict> <key>DisableDrivers</key> <array> <string>Nothing</string> </array> <key>GUI</key> <dict> <key>Hide</key> <array> <string>Windows</string> <string>BOOTX64.EFI</string> </array> <key>Language</key> <string>en:0</string> <key>Mouse</key> <dict> <key>Enabled</key> <true/> <key>Speed</key> <integer>8</integer> </dict> <key>Scan</key> <dict> <key>Entries</key> <true/> <key>Legacy</key> <true/> <key>Tool</key> <true/> </dict> <key>TextOnly</key> <false/> <key>Theme</key> <string>Mavs Style</string> </dict> <key>Graphics</key> <dict> <key>Inject</key> <dict> <key>ATI</key> <false/> <key>Intel</key> <true/> <key>NVidia</key> <false/> </dict> <key>PatchVBios</key> <false/> </dict> <key>KernelAndKextPatches</key> <dict> <key>AppleRTC</key> <true/> <key>AsusAICPUPM</key> <true/> <key>Debug</key> <false/> <key>KernelCpu</key> <false/> <key>KextsToPatch</key> <array> <dict> <key>Comment</key> <string>External icons patch</string> <key>Find</key> <data> RXh0ZXJuYWw= </data> <key>Name</key> <string>AppleAHCIPort</string> <key>Replace</key> <data> SW50ZXJuYWw= </data> </dict> </array> </dict> <key>RtVariables</key> <dict> <key>BooterConfig</key> <string>0x28</string> <key>CsrActiveConfig</key> <string>0x67</string> <key>LogEveryBoot</key> <string>10</string> <key>LogLineCount</key> <integer>3000</integer> <key>MountEFI</key> <true/> </dict> <key>SystemParameters</key> <dict> <key>InjectKexts</key> <string>Detect</string> <key>InjectSystemID</key> <true/> </dict> </dict> </plist> My smbios from previous version of OSX <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>SMbiosdate</key> <string>02/29/08</string> <key>SMbiosvendor</key> <string>Apple Computer, Inc.</string> <key>SMbiosversion</key> <string>MP31.88Z.006C.B05.0802291410</string> <key>SMboardproduct</key> <string>Mac-F42C88C8</string> <key>SMfamily</key> <string>Mac Pro</string> <key>SMmanufacturer</key> <string>Apple Computer, Inc.</string> <key>SMproductname</key> <string>MacPro3,1</string> <key>SMserial</key> <string>CK945941XYL</string> <key>SMsystemversion</key> <string>1.0</string> </dict> </plist> The org.chameleon.Boot.plist file <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>AtiConfig</key> <string>Pithecia</string> <key>AtiPorts</key> <string>2</string> <key>EnableHDMIAudio</key> <string>Yes</string> <key>EthernetBuiltIn</key> <string>Yes</string> <key>Graphics Mode</key> <string>1024x768x32</string> <key>GraphicsEnabler</key> <string>Yes</string> <key>HDAEnabler</key> <string>Yes</string> <key>Kernel</key> <string>/System/Library/Kernels/kernel</string> <key>Kernel Flags</key> <string>kext-dev-mode=1 darkwake=0 dart=0</string> <key>Legacy Logo</key> <string>Yes</string> <key>PciRoot</key> <string>1</string> <key>SMBIOS</key> <string>/Extra/smbios.plist</string> <key>ShowInfo</key> <string>Yes</string> <key>SystemType</key> <string>1</string> <key>Timeout</key> <string>1</string> <key>USBBusFix</key> <string>Yes</string> <key>UseKernelCache</key> <string>Yes</string> </dict> </plist> finally clover install.log Clover EFI installer log - Sat Oct 3 16:17:49 ART 2015 Installer version: v2k r3264 EFI bootloader ====================================================== /dev/disk0 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *2.0 TB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_HFS Media Server 249.5 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s3 4: Apple_HFS Datos 1.7 TB disk0s4 /dev/disk1 (external, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *250.1 GB disk1 1: EFI EFI 209.7 MB disk1s1 2: Apple_HFS INSTALLER 249.7 GB disk1s2 ====================================================== Backing up EFI files Stage 2 - Written boot6 (x64) to //boot ====================================================== Installing BootSectors/BootLoader No Active Partition Stage 0 - Writting boot0af to /dev/disk0 /usr/local/bin/fdisk440 -u -f //usr/standalone/i386/boot0af -y /dev/disk0 Stage 1 - Writting boot1h to /dev/rdisk0s2 File system is HFS. dd if=//usr/standalone/i386/boot1h of=/dev/rdisk0s2 ====================================================== =========== Clover EFI Installation Finish =========== ====================================================== Link to comment Share on other sites More sharing options...
imacosiris Posted October 5, 2015 Author Share Posted October 5, 2015 Hi guys I think i found the problem, but i can't solve yet I found the file sysctl.conf on /etc/sysctl.conf this file have the tcp parameters i found some site with info and recommendation this is an example Any one have any idea of this parameters for OS X 10.11 ?? kern.ipc.maxsockbuf=4194304 kern.ipc.somaxconn=2048 kern.ipc.nmbclusters=2048 net.inet.tcp.rfc1323=0 net.inet.tcp.win_scale_factor=4 net.inet.tcp.sockthreshold=16 net.inet.tcp.sendspace=1042560 net.inet.tcp.recvspace=1042560 net.inet.tcp.mssdflt=1448 net.inet.tcp.v6mssdflt=1428 net.inet.tcp.msl=15000 net.inet.tcp.always_keepalive=0 net.inet.tcp.delayed_ack=0 net.inet.tcp.slowstart_flightsize=20 net.inet.tcp.local_slowstart_flightsize=20 net.inet.tcp.blackhole=2 net.inet.udp.blackhole=1 net.inet.icmp.icmplim=50 Link to comment Share on other sites More sharing options...
imacosiris Posted October 6, 2015 Author Share Posted October 6, 2015 any ideas ? please Link to comment Share on other sites More sharing options...
Maniac10 Posted October 7, 2015 Share Posted October 7, 2015 Hi imacosiris, first of all try the latest Realtek driver please. Link to comment Share on other sites More sharing options...
imacosiris Posted October 7, 2015 Author Share Posted October 7, 2015 Hi imacosiris, first of all try the latest Realtek driver please. Thanks Maniac10 i will try that I have an update, i change the /etc/sysctl.conf into this: net.inet.tcp.delayed_ack=0 net.local.stream.recvspace=65535 net.local.stream.sendspace=65535 net.inet.tcp.sendspace=1042560 net.inet.tcp.recvspace=1042560 I try other combinations but this works very well, now i can move files from one mac to another again in minutes no hours With Plex, i can see videos with direct play on my iMac . But this is strange i still have problems if i try to see videos on the AppleTV ( i try to connect the apple TV with an ethernet cable same result) even when the apple TV and plex are set to do direct play. Yesterday i manage to play (airplay video) from my iMac (real mac) to the apple TV, so.... with all that test, i will try to replace the ethernet driver and come back to you regards Link to comment Share on other sites More sharing options...
Maniac10 Posted October 7, 2015 Share Posted October 7, 2015 You should ask the developer of the kext (on that thread I linked before) for a few tips, I read that there are some settings for fine-tuning the performance but I don't know that much about the topic. Good luck! Link to comment Share on other sites More sharing options...
imacosiris Posted October 8, 2015 Author Share Posted October 8, 2015 You should ask the developer of the kext (on that thread I linked before) for a few tips, I read that there are some settings for fine-tuning the performance but I don't know that much about the topic. Good luck! Thanks a lot Maniac10 As i say in my other post your ideas really help my I will ask to the developer, i still have the streaming problem, but the network transfers is really good Thanks Again! Regards Link to comment Share on other sites More sharing options...
Recommended Posts