thomidefix Posted January 29, 2015 Share Posted January 29, 2015 Hi all ! i'm french Newly arrived on the forum! I ask for help So to start is my hardware CPU: I7 4470 Haswell CM: Asus Maximus VI Formula RAM: 4GB DDR3 4 X DD: INTEL SSD 60GB Screenshot : http://puu.sh/ePPLr/290fc7f998.png So I can not go beyond the screenshot ! thank you for your help Link to comment Share on other sites More sharing options...
Allan Posted January 29, 2015 Share Posted January 29, 2015 Hi and Welcome to InsanelyMac forum! Try configuring your BIOS: http://olarila.com/forum/viewtopic.php?f=28&t=4084 And if you want get support in your language (if you have passed in the two initial tests), you can post here: Français Link to comment Share on other sites More sharing options...
thomidefix Posted January 29, 2015 Author Share Posted January 29, 2015 i prefer english support So ! my bios is early correctly config. I continue to look for! Link to comment Share on other sites More sharing options...
Allan Posted January 29, 2015 Share Posted January 29, 2015 What method you use for install OS X? Link to comment Share on other sites More sharing options...
thomidefix Posted January 29, 2015 Author Share Posted January 29, 2015 First i install usb with command : sudo /Applications/Install\ OS\ X\ Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/Install --applicationpath /Applications/Install\ OS\ X\ Yosemite.app --nointeraction And install Clover Full UEFI mode I use command for boot : kext-dev-mode=1 -v -x GraphicsEnabler=No cpus=1 Link to comment Share on other sites More sharing options...
Allan Posted January 29, 2015 Share Posted January 29, 2015 Some of these boot arguments is for Chameleon... http://clover-wiki.zetam.org/Configuration/Boot#Arguments Like: GraphicsEnabler=Yes/No - Clover use GraphicsInjector: http://www.insanelymac.com/forum/topic/282787-clover-v2-instructions/?p=1853010 Try inject this IGPlatformID: 0c260000 Link to comment Share on other sites More sharing options...
thomidefix Posted January 29, 2015 Author Share Posted January 29, 2015 you recomand use clover or chameleon ? Link to comment Share on other sites More sharing options...
Allan Posted January 29, 2015 Share Posted January 29, 2015 For begin install and gave your Hackintosh works soft i recommend Chameleon. But after you already have your Hackintosh running smoothly, i recommend installing the Clover bootloader, and in your case use UEFI mode. Link to comment Share on other sites More sharing options...
thomidefix Posted January 29, 2015 Author Share Posted January 29, 2015 Hi i test chamelon, but it does not create the boot EFI. The Boot EFI is empty with "ls -lsa" :/ bash-3.2# mkdir /Volumes/EFIbash-3.2# mount_msdos /dev/disk5s1 /Volumes/EFI I have attached the logs in the post . Chameleon_Installer_Log.txt Link to comment Share on other sites More sharing options...
Allan Posted January 30, 2015 Share Posted January 30, 2015 Is obvious, Chameleon don't use (U)EFI mode, you can install in EFI partition but will not works like Clover (UEFI mode). Per hout, just install Chameleon in your HDD. Link to comment Share on other sites More sharing options...
Recommended Posts